1、BRITISH STANDARDBS EN 50377-8-2:2007Connector sets and interconnect components to be used in optical fibre communication systems Product specifications Part 8-2: Type LSH-APC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, composite ferrule category CThe European Standa
2、rd EN 50377-8-2:2007 has the status of a British StandardICS 33.180.20g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58BS EN 50377-8-2:2007This Briti
3、sh Standard was published under the authority of the Standards Policy and Strategy Committee on 28 September 2007 BSI 2007ISBN 978 0 580 57547 1National forewordThis British Standard is the UK implementation of EN 50377-8-2:2007.The UK participation in its preparation was entrusted by Technical Comm
4、ittee GEL/86, Fibre optics, to Subcommittee GEL/86/2, Fibre optic interconnecting devices and passive components.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract.
5、Users are responsible for its correct application.Compliance with a British Standard cannot confer immunity from legal obligations.Amendments issued since publicationAmd. No. Date CommentsEUROPEAN STANDARD EN 50377-8-2 NORME EUROPENNE EUROPISCHE NORM August 2007 CENELEC European Committee for Electr
6、otechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2007 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. N
7、o. EN 50377-8-2:2007 E ICS 33.180.20 English version Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications - Part 8-2: Type LSH-APC simplex terminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, composite ferrule category
8、 C Jeux de connecteurs et composants dinterconnexion utiliser dans les systmes de communication par fibres optiques - Spcifications de produit - Partie 8-2: Type LSH-APC simplex cbl sur une fibre unimodale des catgories B1.1 et B1.3 de la CEI 60793-2-50, frule composite, catgorie C Steckverbinderstz
9、e und Verbindungsbauelemente fr Lichtwellenleiter-Datenbertragungssysteme - Produktnormen - Teil 8-2: Bauart LSH-APC-Simplex zum Anschluss an Einmodenfasern der Typen B1.1 und B1.3 nach IEC 60793-2-50 mit Komposit-Stift fr die Kategorie C This European Standard was approved by CENELEC on 2007-03-01.
10、 CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained
11、 on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central
12、Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta
13、, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. EN 50377-8-2:2007 - 2 - Foreword This European Standard was prepared by the Technical Committee CENELEC TC 86BXA, Fibre optic interconnect, passive and connectorised component
14、s. The text of the draft was submitted to the Unique Acceptance Procedure and was approved by CENELEC as EN 50377-8-2 on 2007-03-01. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement
15、(dop) 2008-03-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2010-03-01 _ - 3 - EN 50377-8-2:2007 Connector sets and interconnect components to be used in optical fibre communication systems - Product specifications Part 8-2: Type LSH-APC simplex te
16、rminated on IEC 60793-2-50 category B1.1 and B1.3 singlemode fibre, composite ferrule category C Description PerformanceCoupling mechanism: Latched push-pull Configuration: Plug/adaptor/plug Fibre category: EN 60793-2-50 Types B1.1 and B1.3 Cable type: See Table 3 Application: Attenuation grades: (R
17、andom mate) Return loss grades: For use in category C (Controlled environment) B: 0,12 dB mean 0,25 dB for 97 % of measurements C: 0,25 dB mean 0,50 dB for 97 % of measurements 1: 60 dB (mated) 55 dB (unmated) Related documents: EN 60794-2 Optical fibre cables - Part 2: Indoor cables - Sectional spe
18、cification (IEC 60794-2) EN 61300 series Fibre optic interconnecting devices and passive components - Basic test and measurement procedures (IEC 61300 series) EN 61753-1 Fibre optic interconnecting devices and passive components performance standard - Part 1: General and guidance for performance sta
19、ndards (IEC 61753-1) EN 61754-15 Fibre optic connector interfaces - Part 15: Type LSH connector family (IEC 61754-15) EN 61755-1 Fibre optic connector optical interfaces - Part 1: Optical interfaces for single mode non-dispersion shifted fibres - General and guidance (IEC 61755-1) EN 61755-3-6 Fibre
20、 optic connector optical interfaces - Part 3-6: Optical interface - 2,5 mm and 1,25 mm diameter cylindrical 8 degrees angled-PC composite ferrule using Cu-Ni-alloy as fibre surrounding material, single mode fibre (IEC 61755-3-6) Outline and maximum dimensions: EN 50377-8-2:2007 - 4 - Contents 1 Scop
21、e5 1.1 Product definition 5 1.2 Intermateability5 1.3 Operating environment 5 1.4 Reliability.5 1.5 Quality assurance .5 2 Normative references 6 3 Description7 3.1 Plug.7 3.2 Adaptor.7 3.3 Materials.7 3.4 Dimensions.7 3.5 Colour and marking .7 4 Variants.8 4.1 Terminated plug.8 4.2 Adaptor.9 5 Dime
22、nsional requirements 10 5.1 Outline dimensions10 5.2 Mating face and other limit dimensions14 6 Tests.23 6.1 Sample size.23 6.2 Test and measurement methods 23 6.3 Test sequence.23 6.4 Pass/fail criteria23 7 Test report 23 8 Testing requirements.24 8.1 Dimensional and marking requirements .24 8.2 Op
23、tical performance requirements 24 8.3 Mechanical performance requirements.26 Annex A (normative) Adaptor matched reference plug details32 Annex B (informative) Reference connector details 33 Annex C (normative) Sample size and product sourcing requirements34 Bibliography.35 Figure 1 - Outline dimens
24、ions - Plug 10 Figure 2 - Outline dimensions - Adaptor. 11 Figure 3 - Mating face and other limit dimensions - Plug 14 Figure 4 - Ferrule end face geometry - After termination. 16 Figure 5 - Positioning of fibre core 17 Figure 6 - Ferrule end face geometry - Allowable undercut. 18 Figure 7 - Offset
25、between plug fibre core and ideal reference 19 Figure 8 - Mating face and other dimensions - Adaptor. 20 Figure 9 - Pin gauge for adaptor 22 Table 1 - Ensured level of random attenuation. 5 Table 2 - Preferred colour scheme. 7 Table 3 - Plug variants . 8 Table 4 - Adaptor variants 9 Table 5 - Geomet
26、rical parameters 16 Table 6 - Optical performance requirements. 24 Table 7 - Mechanical performance requirements . 26 Table 8 - Environmental performance requirements 30 - 5 - EN 50377-8-2:2007 1 Scope 1.1 Product definition This European Standard contains the initial, start of life dimensional, opt
27、ical, mechanical and environmental performance requirements which a terminated and assembled singlemode resilient alignment sleeve LSH-APC simplex connector set (plug/adaptor/plug), adaptor and patchcord must meet in order to be categorised as an EN standard product. Since different variants and gra
28、des of performance are permitted, product marking details are given in 3.5. 1.2 Intermateability Although all products conforming to the requirements of this standard will intermate, the resulting level of random attenuation performance will only be ensured in accordance with Table 1. The intention
29、is that this will be true irrespective of the manufacturing source(s) of the product. When intermating plug variants having different attenuation grades, the resulting level of attenuation can not be assured to be any better than the worst attenuation grade. The intermating of a grade C plug with a
30、grade B plug will result in an uncertain level of random attenuation performance. Table 1 - Ensured level of random attenuation Plug variant/Attenuation grade C B C C C B C B 1.3 Operating environment The tests selected combined with the severities and durations are representative of a category C en
31、vironment as defined in EN 61753-1. 1.4 Reliability Whilst the anticipated service life expectancy of the product in this environment is 20 years, compliance with this standard does not guarantee the reliability of the product. This should be predicted using a recognised reliability assessment progr
32、amme. 1.5 Quality assurance Compliance with this standard does not guarantee the manufacturing consistency of the product. This should be maintained using a recognised quality assurance programme. EN 50377-8-2:2007 - 6 - 2 Normative references The following referenced documents are indispensable for
33、 the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. EN 60793-2-50 Optical fibres - Part 2-50: Product specifications - Sectional specification for class B si
34、ngle-mode fibres (IEC 60793-2-50) EN 61300-2-1 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-1: Tests - Vibration (sinusoidal) (IEC 61300-2-1) EN 61300-2-2 Fibre optic interconnecting devices and passive components - Basic test and measur
35、ement procedures - Part 2-2: Tests - Mating durability (IEC 61300-2-2) EN 61300-2-4 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-4: Tests - Fibre/cable retention (IEC 61300-2-4) EN 61300-2-6 Fibre optic interconnecting devices and passiv
36、e components - Basic test and measurement procedures - Part 2-6: Tests - Tensile strength of coupling mechanism (IEC 61300-2-6) EN 61300-2-12 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-12: Tests - Impact (IEC 61300-2-12) EN 61300-2-17
37、Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-17: Tests - Cold (IEC 61300-2-17) EN 61300-2-18 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-18: Tests - Dry heat High temperatur
38、e endurance (IEC 61300-2-18) EN 61300-2-19 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-19: Tests - Damp heat (steady state) (IEC 61300-2-19) EN 61300-2-22 Fibre optic interconnecting devices and passive components - Basic test and measu
39、rement procedures - Part 2-22: Tests - Change of temperature (IEC 61300-2-22) EN 61300-2-26 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-26: Tests - Salt mist (IEC 61300-2-26) EN 61300-2-42 Fibre optic interconnecting devices and passive
40、 components - Basic test and measurement procedures - Part 2-42: Tests - Static side load for connectors (IEC 61300-2-42) EN 61300-2-44 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-44: Tests - Flexing of the strain relief of fibre optic
41、devices (IEC 61300-2-44) EN 61300-3-4 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-4: Examinations and measurements - Attenuation (IEC 61300-3-4) EN 61300-3-6 Fibre optic interconnecting devices and passive components - Basic test and me
42、asurement procedures - Part 3-6: Examinations and measurements - Return loss (IEC 61300-3-6) EN 61300-3-10 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-10: Examinations and measurements - Gauge retention force (IEC 61300-3-10) EN 61300-3
43、-15 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-15: Examinations and measurements - Eccentricity of a convex polished ferrule endface (IEC 61300-3-15) EN 61300-3-16 Fibre optic interconnecting devices and passive components - Basic test
44、 and measurement procedures - Part 3-16: Examinations and measurements - Endface radius of spherically polished ferrules (IEC 61300-3-16) EN 61300-3-23 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-23: Examinations and measurements - Fibr
45、e position relative to ferrule endface (IEC 61300-3-23) EN 61300-3-34 Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-34: Examinations and measurements - Attenuation of random mated connectors (IEC 61300-3-34) EN 61753-1 Fibre optic interco
46、nnecting devices and passive components performance standard - Part 1: General and guidance for performance standards (IEC 61753-1) EN 61754-15 Fibre optic connector interfaces - Part 15: Type LSH connector family (IEC 61754-15) EN 61755-1 Fibre optic connector optical interfaces - Part 1: Optical i
47、nterfaces for single mode non-dispersion shifted fibres - General and guidance (IEC 61755-1) EN 61755-3-6 Fibre optic connector optical interfaces - Part 3-6: Optical interface - 2,5 mm and 1,25 mm diameter cylindrical 8 degrees angled-PC composite ferrule using Cu-Ni-alloy as fibre surrounding mate
48、rial, single mode fibre (IEC 61755-3-6) - 7 - EN 50377-8-2:2007 3 Description The LSH-APC simplex connector is a single position plug connector set of plug/adaptor/plug configuration characterised by a cylindrical, spring loaded butting ferrule of 2,5 mm nominal diameter and a latched push-pull coup
49、ling mechanism. The optical alignment mechanism of the connectors is of a resilient sleeve style. 3.1 Plug The plug features a cylindrical composite ferrule using Cu-Ni-alloy as fibre surrounding material and a push-pull mechanism. It has a single male key which is used to limit and may be used to orientate, the relative rotation between mated connectors. The plug has mechanical and colour coding. Alternative materials may be used for the ferrule that have directly compatible material properties to the specified materials but the end fa
