EN 50541-2-2013 en Three phase dry-type distribution transformers 50 Hz from 100 kVA to 3 150 kVA with highest voltage for equipment not exceeding 36 kV - Part 2 Determination of l.pdf

上传人:inwarn120 文档编号:717266 上传时间:2019-01-04 格式:PDF 页数:10 大小:894.46KB
下载 相关 举报
EN 50541-2-2013 en Three phase dry-type distribution transformers 50 Hz from 100 kVA to 3 150 kVA with highest voltage for equipment not exceeding 36 kV - Part 2 Determination of l.pdf_第1页
第1页 / 共10页
EN 50541-2-2013 en Three phase dry-type distribution transformers 50 Hz from 100 kVA to 3 150 kVA with highest voltage for equipment not exceeding 36 kV - Part 2 Determination of l.pdf_第2页
第2页 / 共10页
EN 50541-2-2013 en Three phase dry-type distribution transformers 50 Hz from 100 kVA to 3 150 kVA with highest voltage for equipment not exceeding 36 kV - Part 2 Determination of l.pdf_第3页
第3页 / 共10页
EN 50541-2-2013 en Three phase dry-type distribution transformers 50 Hz from 100 kVA to 3 150 kVA with highest voltage for equipment not exceeding 36 kV - Part 2 Determination of l.pdf_第4页
第4页 / 共10页
EN 50541-2-2013 en Three phase dry-type distribution transformers 50 Hz from 100 kVA to 3 150 kVA with highest voltage for equipment not exceeding 36 kV - Part 2 Determination of l.pdf_第5页
第5页 / 共10页
点击查看更多>>
资源描述

1、BSI Standards PublicationBS EN 50541-2:2013Three phase dry-typedistribution transformers 50Hz, from 100 kVA to 3 150kVA, with highest voltage forequipment not exceeding 36kV -Part 2: Determination of loadability of atransformer loaded with non-sinusoidalcurrentBS EN 50541-2:2013 BRITISH STANDARDNati

2、onal forewordThis British Standard is the UK implementation of EN 50541-2:2013.It supersedes BS 7844-3:1998 which is withdrawn.The UK participation in its preparation was entrusted to TechnicalCommittee PEL/14, Power transformers.A list of organizations represented on this committee can beobtained o

3、n request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its correctapplication. The British Standards Institution 2013. Published by BSI StandardsLimited 2013ISBN 978 0 580 78418 7ICS 29.180Compliance with a British

4、 Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 July 2013.Amendments issued since publicationDate Text affectedBS EN 50541-2:2013EUROPEAN STANDARD EN 50541-2 NORME EUROPENNE EUROPISCHE

5、NORM June 2013 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Management Centre: Avenue Marnix 17, B - 1000 Brussels 2013 CENELEC - All rights of exploitation in any form and by any mean

6、s reserved worldwide for CENELEC members. Ref. No. EN 50541-2:2013 E ICS 29.180 Supersedes HD 538.3 S1:1997 English version Three phase dry-type distribution transformers 50 Hz, from 100 kVA to 3 150 kVA, with highest voltage for equipment not exceeding 36 kV - Part 2: Determination of loadability o

7、f a transformer loaded with non-sinusoidal current Transformateurs triphass de distribution de type sec 50 Hz, de 100 kVA 3 150 kVA, avec une tension la plus leve pour le matriel ne dpassant pas 36 kV - Partie 2: Dtermination de la caractristique de puissance dun transformateur avec des courants de

8、charge non-sinusodaux Drehstrom-Trocken-Verteilungstransformatoren, 50 Hz, 100 kVA bis 3 150 kVA, mit einer hchsten Spannung fr Betriebsmittel kleiner oder gleich 36 kV - Teil 2: Bestimmung der Bemessungsleistung eines Transformators bei nicht sinusfrmigen Laststrmen This European Standard was appro

9、ved by CENELEC on 2013-04-15. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such natio

10、nal standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its ow

11、n language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia

12、, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 50541-2:2013EN 50541-2:2013 - 2 - Contents Foreword 3 1 Scope .

13、4 2 Application 4 3 Equivalent power rating . 4 4 Calculation of the factor K to obtain the equivalent power rating 4 BS EN 50541-2:2013EN 50541-2:2013 - 3 - Foreword This document (EN 50541-2:2013) has been prepared by CLC/TC 14 “Power transformers“. The following dates are fixed: latest date by wh

14、ich this document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2014-04-15 latest date by which the national standards conflicting with this document have to be withdrawn (dow) 2016-04-15 The EN 50541 series consists of the following

15、 parts, under the general title: “Three phase dry-type distribution transformers 50 Hz, from 100 kVA to 3 150 kVA, with highest voltage for equipment not exceeding 36 kV”: Part 1: General requirements Part 2: Determination of loadability of a transformer loaded with non-sinusoidal current This docum

16、ent supersedes HD 538.3 S1:1997. BS EN 50541-2:2013EN 50541-2:2013 - 4 - 1 Scope This European Standard gives to the user guidance to determine the loadability of dry type distribution transformers, as defined in and covered by EN 50541-1, in the case of load current with harmonic factors exceeding

17、the maximum values allowed. 2 Application For normal electrical energy distribution, the allowable total harmonic factor1)and even harmonic factor due to the load current are assumed to be limited to 5 % and 1 % respectively. For electrical distribution with higher harmonic factors, it has to be tak

18、en into account that the load loss increases and, by consequence, the temperature rises in the transformer exceed those corresponding to sinusoidal currents having the same r.m.s. value. If the transformer is intended for converter operation or the harmonic factor is higher than 5 %, the matter is d

19、iscussed between purchaser and manufacturer. 3 Equivalent power rating The equivalent power rating is related to sinusoidal current which causes the same losses as those occurring with the non-sinusoidal current imposed. The equivalent power rating is equal to the power based on the r.m.s. value of

20、the non-sinusoidal current multiplied by the factor K. The rated power of the transformer to be used shall be equal to or higher than the equivalent power rating. In case a transformer in service is subsequently loaded with harmonic currents, a derating factor 1/K shall be applied to the rated power

21、. 4 Calculation of the factor K to obtain the equivalent power rating The factor K is given by the following formula2): 2122 12111+=NnnnqIInIIeeK where 1)The harmonic factor H, in percentage, is defined by: 21221100%=NnnnIIH 2)In the formula, it is assumed that both power ratings are based on the sa

22、me r.m.s. value of the load current. BS EN 50541-2:2013EN 50541-2:2013 - 5 - e = the eddy current loss due to sinusoidal current at fundamental frequency (e.g. 50 Hz), divided by the loss due to a d.c. current equal to the r.m.s. value of the sinusoidal current, both at reference temperature; n = ha

23、rmonic order; I = the r.m.s. value of the sinusoidal current and, in the other case, of non-sinusoidal current, containing all harmonics, given by 2121112112=NnnnNnnnIIIII In= the nthharmonic current (amplitude or r.m.s. value); I1= the fundamental current (amplitude or r.m.s. value); q = an exponen

24、tial constant3). 3)The exponent q is dependent on the type of windings and on the frequency. However, as an approximation and as a guidance, the following constant values may be used: 1,7 for transformers with round or rectangular wire in both the low and high voltage windings; 1,5 for transformers

25、having low voltage foil windings. Other values, based on measurements and possibly frequency dependent, may be applied by agreement between purchaser and manufacturer. This page deliberately left blankThis page deliberately left blankBSI is the national body responsible for preparing British Standar

26、ds and other standards-related publications, information and services.BSI is incorporated by Royal Charter. British Standards and other standardization products are published by BSI Standards Limited.British Standards Institution (BSI)BSI Group Headquarters389 Chiswick High Road London W4 4AL UKAbou

27、t usWe bring together business, industry, government, consumers, innovators and others to shape their combined experience and expertise into standards -based solutions.The knowledge embodied in our standards has been carefully assembled in a dependable format and refined through our open consultatio

28、n process. Organizations of all sizes and across all sectors choose standards to help them achieve their goals.Information on standardsWe can provide you with the knowledge that your organization needs to succeed. Find out more about British Standards by visiting our website at or contacting our Cu

29、stomer Services team or Knowledge Centre.Buying standardsYou can buy and download PDF versions of BSI publications, including British and adopted European and international standards, through our website at where hard copies can also be purchased. If you need international and foreign standards fro

30、m other Standards Development Organizations, hard copies can be ordered from our Customer Services team.SubscriptionsOur range of subscription services are designed to make using standards easier for you. For further information on our subscription products go to British Standards Online (BSOL) you

31、ll have instant access to over 55,000 British and adopted European and international standards from your desktop. Its available 24/7 and is refreshed daily so youll always be up to date. You can keep in touch with standards developments and receive substantial discounts on the purchase price of stan

32、dards, both in single copy and subscription format, by becoming a BSI Subscribing Member. PLUS is an updating service exclusive to BSI Subscribing Members. You will automatically receive the latest hard copy of your standards when theyre revised or replaced. To find out more about becoming a BSI Sub

33、scribing Member and the benefits of membership, please visit a Multi-User Network Licence (MUNL) you are able to host standards publications on your intranet. Licences can cover as few or as many users as you wish. With updates supplied as soon as theyre available, you can be sure your documentatio

34、n is current. For further information, email .RevisionsOur British Standards and other publications are updated by amendment or revision. We continually improve the quality of our products and services to benefit your business. If you find an inaccuracy or ambiguity within a British Standard or othe

35、r BSI publication please inform the Knowledge Centre.CopyrightAll the data, software and documentation set out in all British Standards and other BSI publications are the property of and copyrighted by BSI, or some person or entity that owns copyright in the information used (such as the internation

36、al standardization bodies) and has formally licensed such information to BSI for commercial publication and use. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, pho

37、tocopying, recording or otherwise without prior written permission from BSI. Details and advice can be obtained from the Copyright & Licensing Department.Useful Contacts:Customer ServicesTel: +44 845 086 9001Email (orders): Email (enquiries): SubscriptionsTel: +44 845 086 9001Email: Knowledge CentreTel: +44 20 8996 7004Email: Copyright & LicensingTel: +44 20 8996 7070Email: NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAW

展开阅读全文
相关资源
猜你喜欢
相关搜索

当前位置:首页 > 标准规范 > 国际标准 > 其他

copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
备案/许可证编号:苏ICP备17064731号-1