1、BSI Standards PublicationBS EN 50569:2013Household and similar electrical appliances Safety Particular requirements for commercial electric spin extractorsBS EN 50569:2013 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 50569:2013. The UK participation in its pr
2、eparation was entrusted to TechnicalCommittee CPL/61, Safety of household and similar electrical appliances.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users
3、 are responsible for its correct application. The British Standards Institution 2013.Published by BSI Standards Limited 2013ISBN 978 0 580 75927 7ICS 97.060Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the
4、Standards Policy and Strategy Committee on 30 November 2013.Amendments/corrigenda issued since publicationDate T e x t a f f e c t e dBS EN 50569:2013EUROPEAN STANDARD EN 50569 NORME EUROPENNE EUROPISCHE NORM November 2013 CENELEC European Committee for Electrotechnical Standardization Comit Europen
5、 de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B - 1000 Brussels 2013 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 50569:2013 E ICS 97.060 En
6、glish version Household and similar electrical appliances - Safety - Particular requirements for commercial electric spin extractors Appareils lectrodomestiques et analogues - Scurit - Rgles particulires pour les machines laver le linge usage collectif Sicherheit elektrischer Gerte fr den Hausgebrau
7、ch und hnliche Zwecke - Besondere Anforderungen fr elektrische Wscheschleudern fr den gewerblichen Gebrauch This European Standard was approved by CENELEC on 2013-06-10. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this Europ
8、ean Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official vers
9、ions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical com
10、mittees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia,
11、 Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 50569:2013BS EN 50569:2013EN 50569:2013 2 Contents Page Foreword . 4 Introduction . 5 1 Scope 6 2 Normative references 7 3 Definitions 8 4 General requirement . 8 5 General conditions for the tests 8 6 Classification . 9 7 M
12、arking and instructions 9 8 Protection against access to live parts . 11 9 Starting of motor-operated appliances . 11 10 Power input and current . 11 11 Heating 11 12 Void . 12 13 Leakage current and electric strength at operating temperature . 12 14 Transient overvoltages . 12 15 Moisture resistanc
13、e . 12 16 Leakage current and electric strength 13 17 Overload protection of transformers and associated circuits 13 18 Endurance 13 19 Abnormal operation . 14 20 Stability and mechanical hazards 14 21 Mechanical strength 16 22 Construction . 17 23 Internal wiring 19 24 Components . 19 25 Supply con
14、nection and external flexible cords 20 26 Terminals for external conductors. 20 27 Provision for earthing . 20 28 Screws and connections . 20 29 Clearances, creepage distances and solid insulation . 20 30 Resistance to heat and fire . 20 31 Resistance to rusting 20 32 Radiation, toxicity and similar
15、 hazards . 20 Annex AA (normative) Rinsing agent 22 Annex BB (normative) Ageing test for elastomeric parts . 22 Annex CC (normative) Emission of acoustical noise 25 Annex ZE (informative) 28 Specific additional requirements for appliances and machines intended for commercial use . 28 Annex ZZ (infor
16、mative) Coverage of Essential Requirements of EC Directives. 29 Bibliography 30 Figure Figure 101 Probe for measuring surface temperatures . 21 BS EN 50569:2013BS EN 50569:2013 3 EN 50569:2013 Tables Table 3 Maximum normal temperature rises . 12 Table AA.1 Rinsing agent 22 BS EN 50569:2013BS EN 5056
17、9:2013EN 50569:2013 4 Foreword This document (EN 50569:2013) has been prepared by CLC/TC 61, “Safety of household and similar electrical appliances“. The following dates are fixed: latest date by which this document has to be implemented at national level by publication of an identical national stan
18、dard or by endorsement (dop) 2014-06-10 latest date by which the national standards conflicting with this document have to be withdrawn (dow) 2016-06-10 EN 50569:2013 is to be read in conjunction with EN 60335-1:2012 and its amendments, which is referred to in this text as “Part 1”. This standard su
19、pplements or modifies the corresponding clauses of Part 1 as indicated in the text. NOTE The following numbering system is used: subclauses, tables and figures that are numbered starting from 101 are additional to those in Part 1; unless notes are in a new subclause or involve notes in Part 1, they
20、are numbered starting from 101, including those in a replaced clause or subclause; additional annexes are lettered AA, BB, etc. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for i
21、dentifying any or all such patent rights. This document has been prepared under a mandate given to CENELEC by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For the relationship with EU Directive(s) see informative Annex ZZ, w
22、hich is an integral part of this document. _ BS EN 50569:2013BS EN 50569:2013 5 EN 50569:2013 Introduction This European Standard has been prepared to provide a means of conforming to essential safety requirements of the Machinery Directive 2006/42/EC. Other requirements and other EU Directives may
23、be applicable to the machines within the scope of this standard. This standard is a product family standard dealing with the safety of commercial electric spin extractor and takes precedence over horizontal and generic standards covering the same subject. This standard recognises the level of protec
24、tion against hazards such as electrical, mechanical, thermal, fire and radiation of commercial electric spin extractors when operated as in normal use taking into account the manufacturers instructions. It also covers any reasonably foreseeable misuse of the machinery and takes into account the way
25、in which electromagnetic phenomena can affect the safe operation of commercial electric spin extractors. A commercial electric spin extractor that complies with the text of this standard will not necessarily be considered to comply with the safety principles of the standard if, when examined and tes
26、ted, it is found to have other features that impair the level of safety covered by these requirements. This standard takes into account the requirements of HD 60364 as far as possible so that there is compatibility with the wiring rules when the machinery is connected to the supply mains. However, n
27、ational wiring rules may differ. BS EN 50569:2013BS EN 50569:2013EN 50569:2013 6 1 Scope This clause of Part 1 is replaced by the following: This European Standard deals with the safety of electrical operated spin extractors intended to be used by trained users in i.e. hotels, hospitals, factories,
28、in light industry and on farms. It also covers spin extractors which are declared for commercial use in public areas and operated by lay persons e.g. in laundrettes, communal laundry rooms. Their rated voltage being not more than 250 V for single phase and 480 V for others. This European Standard de
29、als with the common hazards presented by spin extractors that are encountered by all persons. However, in general, it does not take into account: a) persons (including children) whose: 1) physical, sensory or mental capabilities, or 2) lack of experience and knowledge, prevents them from using the s
30、pin extractors safely without supervision or instruction, b) children playing with the spin extractors. Attention is drawn to the fact that: for commercial electric spin extractors intended to be used in vehicles or on board ships or aircraft, additional requirements might be necessary, in many coun
31、tries additional requirements are specified by the national health authorities, the national authorities responsible for the protection of labour, the national water supply authorities and similar authorities. This European Standard does not apply to: c) industrial laundry machinery (EN ISO 10472-2)
32、, d) spin extractors intended to be used in locations where special conditions prevail, such as the presence of a corrosive or explosive atmosphere (dust, vapour or gas). For the purpose of this standard, the term “appliance” as used in Part 1 is to be read as “Spin extractors intended for commercia
33、l use”. BS EN 50569:2013BS EN 50569:2013 7 EN 50569:2013 2 Normative references This clause of Part 1 is applicable except as follows: Addition: EN 60204-1:2006/A1:2009, Safety of machinery Electrical equipment of machines Part 1: General requirements (IEC 60204-1:2005/A1:2008) EN 60335-1:2012, Hous
34、ehold and similar electrical appliances Safety Part 1: General requirements (IEC 60335-1:2010, modified) EN 60704-1:2010, Household and similar electrical appliances Test code for the determination of airborne acoustical noise Part 1: General requirements (IEC 60704-1:2010) EN 60730-2-12:2006, Autom
35、atic electrical controls for household and similar use Part 2-12: Particular requirements for electrically operated door locks (IEC 60730-2-12:2005, modified) EN ISO 3744, Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Engineering methods
36、for an essentially free field over a reflecting plane (ISO 3744) EN ISO 3746, Acoustics Determination of sound power levels and sound energy levels of noise sources using sound pressure Survey method using an enveloping measurement surface over a reflecting plane (ISO 3746) EN ISO 4871, Acoustics De
37、claration and verification of noise emission values of machinery and equipment (ISO 4871) EN ISO 9614-2:1996, Acoustics Determination of sound power levels of noise sources using sound intensity Part 2: Measurement by scanning (ISO 9614-2:1996) EN ISO 11201, Acoustics Noise emitted by machinery and
38、equipment Determination of emission sound pressure levels at a work station and at other specified positions in an essentially free field over a reflecting plane with negligible environmental corrections (ISO 11201) EN ISO 11203, Acoustics Noise emitted by machinery and equipment Determination of em
39、ission sound pressure levels at a work station and at other specified positions from the sound power level (ISO 11203) EN ISO 11688-1, Acoustics Recommended practice for the design of low-noise machinery and equipment Part 1: Planning (ISO/TR 11688-1) ISO 1817:2005, Rubber, vulcanized Determination
40、of the effect of liquids Replace the reference to EN 62233 by: EN 62233:2008, Measurement methods for electromagnetic fields of household appliances and similar apparatus with regard to human exposure (IEC 62233:2005, modified) BS EN 50569:2013BS EN 50569:2013EN 50569:2013 8 3 Terms and definitions
41、This clause of Part 1 is applicable except as follows: Replace 3.1.9 by: 3.1.9 normal operation the appliance is filled with textile material having a mass in the dry condition equal to the maximum mass specified in the instructions. The textile material consists of pre-washed double hemmed cotton s
42、heets having dimensions of approximately 70 cm x 70 cm and a specific mass between 140 g/m2and 175 g/m2in the dry condition. It is saturated with water before being evenly distributed in the drum Addition: 3.1.101 spin extractor appliance in which the textiles are placed in a vertically axis drum wh
43、ich is spun to water-extracting function by which water is removed from textiles by centrifugal force 3.1.102 guard part of the appliance specifically designed to provide protection by means of a physical barrier 3.1.103 operator person or persons installing, operating, adjusting, maintaining, clean
44、ing, repairing or moving appliances 3.1.104 workstation place, as defined in the instructions of the relevant appliance where the operator has to be in attendance to operate, or to adjust, or to control the appliance Note 1 to entry: Example is the location where the operator loads the appliance. 3.
45、1.105 public area area in which the general public including children can enter Note 1 to entry: Examples are laundrettes, communal laundry rooms. 4 General requirement This clause of Part 1 is applicable except as follows: Replace the first paragraph with the following: Appliances shall be construc
46、ted so that they function safely so as to cause no danger to persons or surroundings during normal use, even in the event of carelessness, and during installation, adjusting, maintenance, cleaning, repairing or transportation. 5 General conditions for the tests This clause of Part 1 is applicable ex
47、cept as follows: 5.2 Addition: The relevant tests of 21.101, 21.102 and 22.103 shall be carried out on the same appliance as that used for the test of Clause 18. 5.3 Addition: BS EN 50569:2013BS EN 50569:2013 9 EN 50569:2013 The relevant tests of 21.101 and 21.102 are carried out before the test of
48、Clause 18. The test of 22.102 is carried out after the test of Clause 18. 6 Classification This clause of Part 1 is applicable except as follows: 6.2 Addition: Appliances shall be at least IPX4. 7 Marking and instructions This clause of Part 1 is applicable except as follows: 7.1 Addition: Appliance
49、s shall be marked in addition with business name, and full address of the manufacturer and, where applicable, his authorised representative, model or type reference, serial number if any and production year, NOTE 101 Production year is the year when the production process is completed. The production year can be a part of the serial number. designation of the appliance, NOTE 102 The designation may be a combination of letters and/or numbers and shall enable
