1、BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06Hollow metallic waveguidesPart 4: Relevant specifications for circular waveguidesBS EN 601534:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 60153-4 December 2017 ICS 33.120.10 Supersedes HD 123.4 S1:1977 Engl
2、ish Version Hollow metallic waveguides - Part 4: Relevant specifications for circular waveguides (IEC 60153-4:2017) Guides dondes mtalliques creux - Partie 4: Spcifications applicables aux guides dondes circulaires (IEC 60153-4:2017) Metallische Hohlleiter - Teil 4: Einzelbestimmungen fr Rundhohllei
3、ter (IEC 60153-4:2017) This European Standard was approved by CENELEC on 2017-09-20. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lis
4、ts and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation u
5、nder the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark,
6、Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. Europea
7、n Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwi
8、de for CENELEC Members. Ref. No. EN 60153-4:2017 E National forewordThis British Standard is the UK implementation of EN 601534:2017. It is identical to IEC 601534:2017.The UK participation in its preparation was entrusted to Technical Committee EPL/46, Cables, wires and waveguides, radio frequency
9、connectors and accessories for communication and signalling.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Th
10、e British Standards Institution 2017 Published by BSI Standards Limited 2017ISBN 978 0 580 93192 5ICS 33.120.10Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31
11、 December 2017.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 601534:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 60153-4 December 2017 ICS 33.120.10 Supersedes HD 123.4 S1:1977 English Version Hollow metallic waveguides - Part 4: Relevant specifica
12、tions for circular waveguides (IEC 60153-4:2017) Guides dondes mtalliques creux - Partie 4: Spcifications applicables aux guides dondes circulaires (IEC 60153-4:2017) Metallische Hohlleiter - Teil 4: Einzelbestimmungen fr Rundhohlleiter (IEC 60153-4:2017) This European Standard was approved by CENEL
13、EC on 2017-09-20. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standard
14、s may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language a
15、nd notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Ge
16、rmany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de N
17、ormalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 60153-4:2017 E BS EN 601534:201
18、7EN 60153-4:2017 (E) 2 European foreword The text of document 46F/344/CDV, future edition 3 of IEC 60153-4, prepared by SC 46F “RF and microwave passive components“, of IEC/TC 46 “Cables, wires, waveguides, RF connectors, RF and microwave passive components and accessories“ was submitted to the IEC-
19、CENELEC parallel vote and approved by CENELEC as EN 60153-4:2017. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2018-06-20 latest date by which the national standards c
20、onflicting with the document have to be withdrawn (dow) 2020-09-20 This document supersedes HD 123.4 S1:1977. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC shall not be held responsible for identifying any or all such pa
21、tent rights. Endorsement notice The text of the International Standard IEC 60153-4:2017 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 60153-1:2016 NOTE Harmoniz
22、ed in EN 60153-1:2016. ISO/IEC 17025:2005 NOTE Harmonized as EN ISO/IEC 17025:2005. BS EN 601534:2017EN 60153-4:2017 (E) 3 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normativ
23、ely referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by com
24、mon modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 60050-726 1982 International electrotechnical vocabulary - C
25、hapter 726: Transmission lines and waveguides - - IEC 60261 - Sealing test for pressurized waveguide tubing and assemblies HD 138 S2 - BS EN 601534:2017This page deliberately left blank 2 IEC 60153-4:2017 IEC 2017 CONTENTS FOREWORD . 3 1 Scope 5 2 Normative references 5 3 Terms and definitions 5 4 G
26、eneral . 5 4.1 Standardized types . 5 4.2 Type designation 5 4.3 Frequency range . 5 5 Mechanical requirements . 6 5.1 General . 6 5.2 Dimensions . 6 5.2.1 Basic diameter and deviations . 6 5.2.2 Basic diameter deviations 9 5.2.3 Ellipticity 9 5.2.4 Wall thickness . 9 5.2.5 Eccentricity 9 5.2.6 Outs
27、ide dimensions . 9 5.3 Other mechanical requirements 10 5.3.1 Bow . 10 5.3.2 Surface roughness . 10 5.3.3 Internal stresses 10 6 Electrical tests Attenuation . 10 7 Additional tests Gastightness 11 Bibliography 12 Table 1 Basic diameter and deviations . 7 Table 2 Circular waveguides 8 Table 3 Inner
28、Diameter deviations 9 Table 3 Outer diameter deviations . 9 2 IEC 60153-4:2017 IEC 2017 CONTENTS FOREWORD . 3 1 Scope 5 2 Normative references 5 3 Terms and definitions 5 4 General . 5 4.1 Standardized types . 5 4.2 Type designation 5 4.3 Frequency range . 5 5 Mechanical requirements . 6 5.1 General
29、 . 6 5.2 Dimensions . 6 5.2.1 Basic diameter and deviations . 6 5.2.2 Basic diameter deviations 9 5.2.3 Ellipticity 9 5.2.4 Wall thickness . 9 5.2.5 Eccentricity 9 5.2.6 Outside dimensions . 9 5.3 Other mechanical requirements 10 5.3.1 Bow . 10 5.3.2 Surface roughness . 10 5.3.3 Internal stresses 10
30、 6 Electrical tests Attenuation . 10 7 Additional tests Gastightness 11 Bibliography 12 Table 1 Basic diameter and deviations . 7 Table 2 Circular waveguides 8 Table 3 Inner Diameter deviations 9 Table 3 Outer diameter deviations . 9 BS EN 601534:2017IEC 60153-4:2017 IEC 2017 3 INTERNATIONAL ELECTRO
31、TECHNICAL COMMISSION _ HOLLOW METALLIC WAVEGUIDES Part 4: Relevant specifications for circular waveguides FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The
32、 object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifi
33、cations (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations l
34、iaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters exp
35、ress, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Commi
36、ttees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC Nation
37、al Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does n
38、ot provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have
39、the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoev
40、er, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publicatio
41、ns is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard
42、 IEC 60153-4 has been prepared by subcommittee 46F: RF and microwave passive components, of IEC technical committee TC:46: Cables, wires, waveguides, RF connectors, RF and microwave passive components and accessories. This third edition cancels and replaces the second edition published in 1973-1. Th
43、is edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) Expand and revise the operation frequency range for waveguides; b) Revise the allowance of aperture dimensions; c) Revise the test method for apertu
44、re dimensions; d) Revise the equation of attenuation. BS EN 601534:2017 4 IEC 60153-4:2017 IEC 2017 The text of this International Standard is based on the following documents: CDV Report on voting 46F/344/CDV 46F/356/RVC Full information on the voting for the approval of this International Standard
45、 can be found in the report on voting indicated in the above table. This document has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all the parts in the IEC 60153 series, published under the general title Hollow metallic waveguides, can be found on the IEC website. The co
46、mmittee has decided that the contents of this document will remain unchanged until the stability date indicated on the IEC website under “http:/webstore.iec.ch“ in the data related to the specific document. At this date, the document will be reconfirmed, withdrawn, replaced by a revised edition, or
47、amended. A bilingual version of this publication may be issued at a later date. IMPORTANT The colour inside logo on the cover page of this publication indicates that it contains colours which are considered to be useful for the correct understanding of its contents. Users should therefore print this
48、 document using a colour printer. BS EN 601534:2017IEC 60153-4:2017 IEC 2017 5 HOLLOW METALLIC WAVEGUIDES Part 4: Relevant specifications for circular waveguides 1 Scope This part of IEC 60153 specifies straight hollow metallic tubing of circular waveguides for use as waveguides in electronic equipm
49、ent. The aim of this recommendation is to specify for hollow metallic waveguides: a) the details necessary to ensure compatibility and, as far as essential, interchangeability; b) test methods; c) uniform requirements for the electrical and mechanical properties. 2 Normative references The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the editio
