1、Specifications for particular types of winding wiresPart 0-10: General requirements - Polyester glass-fibre wound fused, unvarnished, or resin or varnish impregnated, bare or enamelled round copper wire (IEC 60317-0-10:2017)BS EN 60317-0-10:2017BSI Standards PublicationWB11885_BSI_StandardCovs_2013_
2、AW.indd 1 15/05/2013 15:06EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 60317-0-10 August 2017 ICS 29.060.10 English Version Specifications for particular types of winding wires - Part 0-10: General requirements - Polyester glass-fibre wound fused, unvarnished, or resin or varnish impregnated
3、, bare or enamelled round copper wire (IEC 60317-0-10:2017) Spcifications pour types particuliers de fils de bobinage - Partie 0-10: Exigences gnrales - Fil de section circulaire en cuivre nu ou maill, guip de fibres de verre polyester fondues, non vernies ou imprgnes de vernis ou de rsine (IEC 6031
4、7-0-10:2017) Technische Lieferbedingungen fr bestimmte Typen von Wickeldrhten - Teil 0-10: Allgemeine Anforderungen - Mit unbeschichteten Polyesterglasfasern umwickelt und verschmolzen oder mit Harz oder Lack imprgnierter blanker oder lackisolierter Runddraht aus Kupfer (IEC 60317-0-10:2017) This Eu
5、ropean Standard was approved by CENELEC on 2017-06-08. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical referen
6、ces concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a C
7、ENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugos
8、lav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnic
9、al Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. E
10、N 60317-0-10:2017 E National forewordThis British Standard is the UK implementation of EN 60317-0-10:2017. It is identical to IEC 60317-0-10:2017.The UK participation in its preparation was entrusted to Technical Committee L/-/99, Miscellaneous Standards - Electrical.A list of organizations represen
11、ted on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2017 Published by BSI Standards Limited 2017ISBN 978 0 580 9
12、0546 9ICS 29.060.10Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 August 2017.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDAR
13、DBS EN 60317010:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 60317-0-10 August 2017 ICS 29.060.10 English Version Specifications for particular types of winding wires - Part 0-10: General requirements - Polyester glass-fibre wound fused, unvarnished, or resin or varnish impregnated, bare
14、 or enamelled round copper wire (IEC 60317-0-10:2017) Spcifications pour types particuliers de fils de bobinage - Partie 0-10: Exigences gnrales - Fil de section circulaire en cuivre nu ou maill, guip de fibres de verre polyester fondues, non vernies ou imprgnes de vernis ou de rsine (IEC 60317-0-10
15、:2017) Technische Lieferbedingungen fr bestimmte Typen von Wickeldrhten - Teil 0-10: Allgemeine Anforderungen - Mit unbeschichteten Polyesterglasfasern umwickelt und verschmolzen oder mit Harz oder Lack imprgnierter blanker oder lackisolierter Runddraht aus Kupfer (IEC 60317-0-10:2017) This European
16、 Standard was approved by CENELEC on 2017-06-08. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references co
17、ncerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC
18、 member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Re
19、public of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Sta
20、ndardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 6031
21、7-0-10:2017 E BS EN 60317010:2017EN 60317-0-10:2017 2 European foreword The text of document 55/1601/FDIS, future edition 1 of IEC 60317-0-10, prepared by IEC/TC 55 “Winding wires“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 60317-0-10:2017. The following dates are f
22、ixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2018-03-08 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2020-06-08 Attention is drawn to th
23、e possibility that some of the elements of this document may be the subject of patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 60317-0-10:2017 was approved by CENELEC as a European Stand
24、ard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 60264 NOTE Harmonized in EN 60264 series. IEC 60317 NOTE Harmonized in EN 60317 series. IEC 60317-70 NOTE Harmonized as EN 60317-70. IEC 60317-71 NOTE Harmon
25、ized as EN 60317-71. IEC 60317-72 NOTE Harmonized as EN 60317-72. IEC 60851-6:2012 NOTE Harmonized as EN 60851-6:2012 (not modified). BS EN 60317010:2017EN 60317-0-10:2017 2 European foreword The text of document 55/1601/FDIS, future edition 1 of IEC 60317-0-10, prepared by IEC/TC 55 “Winding wires“
26、 was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 60317-0-10:2017. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2018-03-08 latest date by w
27、hich the national standards conflicting with the document have to be withdrawn (dow) 2020-06-08 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights. E
28、ndorsement notice The text of the International Standard IEC 60317-0-10:2017 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 60264 NOTE Harmonized in EN 60264 ser
29、ies. IEC 60317 NOTE Harmonized in EN 60317 series. IEC 60317-70 NOTE Harmonized as EN 60317-70. IEC 60317-71 NOTE Harmonized as EN 60317-71. IEC 60317-72 NOTE Harmonized as EN 60317-72. IEC 60851-6:2012 NOTE Harmonized as EN 60851-6:2012 (not modified). EN 60317-0-10:2017 3 Annex ZA (normative) Norm
30、ative references to international publications with their corresponding European publications The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undat
31、ed references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European St
32、andards listed in this annex is available here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 60851 series Winding wires - Test methods EN 60851 series IEC 60851-5 2008 Winding wires - Test methods - Part 5: Electrical properties EN 60851-5 2008 ISO 3 - Preferred numbers - Series of preferre
33、d numbers - - BS EN 60317010:2017This page deliberately left blank 4 IEC 60317-0-10:2017 IEC 2017 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES Part 0-10: General requirements Polyester glass-fibre wound fused, unvarnished, or resin or varnish impre
34、gnated, bare or enamelled round copper wire FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all
35、 questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Public
36、ation(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC
37、 collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opi
38、nion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to
39、ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparentl
40、y to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certific
41、ation bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall
42、attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal
43、fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this public
44、ation. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 60317-0-10 has been prepared by IEC technical committee 5
45、5: Winding wires. The text of this standard is based on the following documents: FDIS Report on voting 55/1601/FDIS 55/1608/RVD Full information on the voting for the approval of this International Standard can be found in the report on voting indicated in the above table. This document has been dra
46、fted in accordance with the ISO/IEC Directives, Part 2. 4 IEC 60317-0-10:2017 IEC 2017 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES Part 0-10: General requirements Polyester glass-fibre wound fused, unvarnished, or resin or varnish impregnated, bar
47、e or enamelled round copper wire FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions
48、concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”).
49、 Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreement
