1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationSpecifications for particular types of winding wiresPart 48: Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire, temperature index 155BS EN 60317
2、-48:2012National forewordThis British Standard is the UK implementation of EN 60317-48:2012. It isidentical to IEC 60317-48:2012. It supersedes BS EN 60317-48:2000 which iswithdrawn.The UK participation in its preparation was entrusted to Technical CommitteeGEL/55, Winding wires.A list of organizati
3、ons represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions of acontract. Users are responsible for its correct application. The British Standards Institution 2012Published by BSI Standards Limited 2012ISBN 97
4、8 0 580 75417 3ICS 29.060.10Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of the StandardsPolicy and Strategy Committee on 30 November 2012.Amendments issued since publicationAmd. No. Date Text affectedBRITISH
5、STANDARDBS EN 60317-48:2012EUROPEAN STANDARD EN 60317-48 NORME EUROPENNE EUROPISCHE NORM October 2012 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Management Centre: Avenue Marnix 17,
6、B - 1000 Brussels 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 60317-48:2012 E ICS 29.060.10 Supersedes EN 60317-48:2000English version Specifications for particular types of winding wires - Part 48: Glass-fibre wound resi
7、n or varnish impregnated, bare or enamelled round copper wire, temperature index 155 (IEC 60317-48:2012) Spcifications pour types particuliers de fils de bobinage - Partie 48: Fil de section circulaire en cuivre nu ou maill, recouvert dun guipage de fibres de verre imprgnes de rsine ou de vernis, in
8、dice de temprature 155 (CEI 60317-48:2012) Technische Lieferbedingungen fr bestimmte Typen von Wickeldrhten - Teil 48: Runddrhte aus Kupfer, blank oder lackisoliert, umhllt mit Glasgewebe und imprgniert, Klasse 155 (IEC 60317-48:2012) This European Standard was approved by CENELEC on 2012-08-13. CEN
9、ELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on
10、application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CE
11、N-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungar
12、y, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 60317-48:2012EN 60317-48:2012 - 2 - Foreword The text of document 55/1326/FDIS, future edition 2
13、of IEC 60317-48, prepared by IEC/TC 55 “Winding wires“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 60317-48:2012. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard
14、 or by endorsement (dop) 2013-05-13 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2015-08-13 This document supersedes EN 60317-48:2000. EN 60317-48:2012 includes the following significant technical changes with respect to EN 60317-48:2000: - new
15、 subclause containing general notes on winding wire, formerly part of the scope; - new subclause containing requirements for appearance; new Clause 23, Pin hole test. This standard is to be read in conjunction with EN 60317-0-6:2001 + A1:2006. Attention is drawn to the possibility that some of the e
16、lements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 60317-48:2012 was approved by CENELEC as a European Standard without any modific
17、ation. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 60264 Series NOTE Harmonised as EN 60264 Series (not modified). IEC 60317 Series NOTE Harmonised as EN 60317 Series (not modified). IEC 60317-8:2010 NOTE Harmonised as EN 60317-8:2
18、010 (not modified). IEC 60317-13:2010 NOTE Harmonised as EN 60317-13:2010 (not modified). IEC 60851 Series NOTE Harmonised as EN 60851 Series (not modified). BS EN 60317-48:2012- 3 - EN 60317-48:2012 Annex ZA (normative) Normative references to international publications with their corresponding Eur
19、opean publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendment
20、s) applies. NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 60317-0-6 + A1 2001 2006 Specifications for particular types of winding wires - Part 0-6: General requirements - Glass-f
21、ibre wound resin or varnish impregnated, bare or enamelled round copper wire EN 60317-0-6 + A1 2001 2006 BS EN 60317-48:2012 2 60317-48 IEC:2012 CONTENTS INTRODUCTION . 5 1 Scope . 6 2 Normative references 6 3 Terms, definitions, general notes and appearance . 6 3.1 Terms and definitions 6 3.2 Gener
22、al notes 6 3.2.1 Methods of test 6 3.2.2 Winding wire 6 3.3 Appearance . 7 4 Dimensions . 7 5 Electrical resistance 7 6 Elongation 7 7 Springiness . 7 8 Flexibility and adherence 7 9 Heat shock . 7 10 Cut-through 7 11 Resistance to abrasion . 7 12 Resistance to solvents 7 13 Breakdown voltage . 8 14
23、 Continuity of insulation 8 15 Temperature index 8 16 Resistance to refrigerants . 8 17 Solderability 8 18 Heat or solvent bonding 8 19 Dielectric dissipation factor . 8 20 Resistance to hydrolysis and to transformer oil 8 21 Loss of mass 8 23 Pin hole test . 8 30 Packaging. 8 Bibliography 9 BS EN 6
24、0317-48:201260317-48 IEC:2012 5 INTRODUCTION This part of IEC 60317 is one of a series which deals with insulated wires used for windings in electrical equipment. The series has three groups describing: 1) Winding wires Test methods (IEC 60851); 2) Specifications for particular types of winding wire
25、s (IEC 60317); 3) Packaging of winding wires (IEC 60264). BS EN 60317-48:2012 6 60317-48 IEC:2012 SPECIFICATIONS FOR PARTICULAR TYPES OF WINDING WIRES Part 48: Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire, temperature index 155 1 Scope This part of IEC 60317 sp
26、ecifies requirements of glass-fibre wound resin or varnish impregnated, bare, grade 1 or grade 2 enamelled round copper winding wire, temperature index 155. The impregnating agent can be, for instance, polyester or polyesterimide resin based. NOTE For this type of wire, the heat shock test is inappr
27、opriate and therefore a heat shock temperature cannot be established. Consequently, a class based on the requirements for temperature index and heat shock temperature cannot be specified. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document
28、 and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60317-0-6:2001, Specifications for particular types of winding wires Part 0-6: General requi
29、rements Glass-fibre wound resin or varnish impregnated, bare or enamelled round copper wire Amendment 1:2006 3 Terms, definitions, general notes and appearance 3.1 Terms and definitions For the purposes of this document, the terms and definitions given in 3.1 of IEC 60317-0-6: 2001 and its Amendment
30、 1:2006 apply. 3.2 General notes 3.2.1 Methods of test Subclause 3.2 of IEC 60317-0-6:2001 applies. In case of inconsistency between IEC 60317-0-6 and this standard, IEC 60317-48 shall prevail. 3.2.2 Winding wire The enamelled wire shall have a temperature index of at least 155, and shall be agreed
31、between purchaser and supplier. The temperature index of the wire is dependent upon the type of impregnating agent used. The impregnating agent applied to the glass-fibre shall have a minimum temperature index of 155. BS EN 60317-48:201260317-48 IEC:2012 7 The glass-fibre covering may be a) a single
32、 layer of glass-fibre, b) a double layer of glass-fibre, with one layer applied in the direction opposite to that of the other layer. The nominal conductor diameters are specified in Clause 4 of IEC 60317-0-6:2001. 3.3 Appearance Subclause 3.3 of IEC 60317-0-6:2001, Amendment 1:2006 applies. 4 Dimen
33、sions Clause 4 of IEC 60317-0-6:2001 applies. 5 Electrical resistance Clause 5 of IEC 60317-0-6:2001 applies. 6 Elongation Clause 6 of IEC 60317-0-6:2001 applies. 7 Springiness Clause 7 of IEC 60317-0-6:2001 applies. 8 Flexibility and adherence Clause 8 of IEC 60317-0-6:2001 applies. 9 Heat shock Te
34、st inappropriate. 10 Cut-through Test inappropriate. 11 Resistance to abrasion Test inappropriate. 12 Resistance to solvents Test inappropriate. BS EN 60317-48:2012 8 60317-48 IEC:2012 13 Breakdown voltage Clause 13 of IEC 60317-0-6:2001 applies. 14 Continuity of insulation Test inappropriate. 15 Te
35、mperature index Clause 15 of IEC 60317-0-6:2001 applies. 16 Resistance to refrigerants Test inappropriate. 17 Solderability Test inappropriate. 18 Heat or solvent bonding Test inappropriate. 19 Dielectric dissipation factor Test inappropriate. 20 Resistance to hydrolysis and to transformer oil Test
36、inappropriate. 21 Loss of mass Test inappropriate. 23 Pin hole test Test inappropriate. 30 Packaging Clause 30 of IEC 60317-0-6:2001 applies. BS EN 60317-48:201260317-48 IEC:2012 9 Bibliography IEC 60264 (all parts), Packaging of winding wires IEC 60317 (all parts), Specifications for particular typ
37、es of winding wires IEC 60317-3:2004, Specifications for particular types of winding wires Part 3: Polyester enamelled round copper wire, class 155 Amendment 1:2010 IEC 60317-8:2010, Specifications for particular types of winding wires Part 8: Polyesterimide enamelled round copper wire, class 180 IE
38、C 60317-13:2010, Specifications for particular types of winding wires Part 13: Polyester or polyesterimide overcoated with polyamide-imide, enamelled round copper wire, class 200 IEC 60851 (all parts), Winding wires Test methods _ BS EN 60317-48:2012This page deliberately left blankThis page deliber
39、ately left blankBSI is the independent national body responsible for preparing British Standards and other standards-related publications, information and services. It presents the UK view on standards in Europe and at the international level. BSI is incorporated by Royal Charter. British Standards
40、and other standardisation products are published by BSI Standards Limited.British Standards Institution (BSI)raising standards worldwideBSI389 Chiswick High Road London W4 4AL UKTel +44 (0)20 8996 9001Fax +44 (0)20 8996 Standards and PASs are periodically updated by amendment or revision. Users of
41、British Standards and PASs should make sure that they possess the latest amendments or editions.It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an inaccuracy or ambiguity while using British Standards would inform the Secretar
42、y of the technical committee responsible, the identity of which can be found on the inside frontcover. Similary for PASs, please notify BSI Customer Services.Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001BSI offers BSI Subscribing Members an individual updating service called PLUS which ensures t
43、hat subscribers automatically receive the latest editions of British Standards and PASs.Tel: +44 (0)20 8996 7669 Fax: +44 (0)20 8996 7001Email: Buying standardsYou may buy PDF and hard copy versions of standards directly using acredit card from the BSI Shop on the website addition all orders for BS
44、I, international and foreign standards publicationscan be addressed to BSI Customer Services.Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001Email: In response to orders for international standards, BSI will supply the British Standard implementation of the relevant international standard, unless o
45、therwise requested.Information on standardsBSI provides a wide range of information on national, Europeanand international standards through its Knowledge Centre.Tel: +44 (0)20 8996 7004 Fax: +44 (0)20 8996 7005Email: BSI Subscribing Members are kept up to date with standards developments and receiv
46、e substantial discounts on the purchase priceof standards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002 Fax: +44 (0)20 8996 7001 Email: Information regarding online access to British Standards and PASs via British Standards Online can be found
47、at information about British Standards is available on the BSI website at www.bsi- the data, software and documentation set out in all British Standards and other BSI publications are the property of and copyrighted by BSI, or some person or entity that own copyright in the information used (such a
48、s the international standardisation bodies) has formally licensed such information to BSI for commerical publication and use. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reproduced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to
