1、BRITISH STANDARDBS EN 60335-2-105: 2005+A11:2010Household and similar electrical appliances Safety Part 2-105: Particular requirements for multifunctional shower cabinetsICS 97.170g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36
2、g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58National forewordThis British Standard is the UK implementation of EN 60335-2-105:2005+A11:2010. It is derived from IEC 60335-2-105:2004, incorporating amendment 1:2008. It supersedes BS EN 60335-2-105:2005+A1:2008 which
3、 will be withdrawn on 1 May 2013.The start and finish of text introduced or altered by amendment is indicated in the text by tags. Tags indicating changes to IEC text carry the number of the IEC amendment. For example, text altered by IEC amendment 1 is indicated by !“.The UK participation in its pr
4、eparation was entrusted by Technical Committee CPL/61, Safety of household and similar electrical appliances, to Subcommittee CPL/61/07, Safety of electrical appliances, heated appliance group.A list of organizations represented on this subcommittee can be obtained on request to its secretary.This p
5、ublication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunity from legal obligations.BS EN 60335-2-105:2005+A11:2010This British Standard waspublished under the authorityo
6、f the Standards Policy andStrategy Committeeon 12 April 2005 BSI 2010Amendments/corrigenda issued since publicationDate Comments 30 April 2009 Implementation of IEC amendment 1:2008 with CENELEC endorsement A1:200830 November 2010 Implementation of CENELEC amendment A11:2010; 24.7 addedISBN 978 0 58
7、0 65865 5EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2005 CENELEC - All ri
8、ghts of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 60335-2-105:2005 E ICS 13.120; 97.170 English version Household and similar electrical appliances - Safety Part 2-105: Particular requirements for multifunctional shower cabinets (IEC 60335-2-105:20
9、04) Appareils lectrodomestiques et analogues - Scurit Partie 2-105: Rgles particulires pour les cabines de douche multifonctions(CEI 60335-2-105:2004) Sicherheit elektrischer Gerte fr den Hausgebrauch und hnliche Zwecke Teil 2-105: Besondere Anforderungen fr mulitifunktionelle Duscheinrichtungen (IE
10、C 60335-2-105:2004) This European Standard was approved by CENELEC on 2004-12-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists
11、and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the resp
12、onsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hun
13、gary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EN 60335-2-105:2005+A11 January 2010EN 63305-2-01:50025 - - 2 Foreword The text of document 61/2737/FDIS, future first editio
14、n of IEC 60335-2-105, prepared by the IEC Technical Committee 61, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 60335-2-105 on 2004-12-01. The following dates are applicable: - latest date by which the EN has to be implemented at national level by publication of an
15、 identical national standard or by endorsement (dop) 2005-09-01 - date on which national standards conflicting with the EN have to be withdrawn (dow) 2007-12-01 This part 2 has to be used in conjunction with EN 60335-1, Household and similar electrical appliances Safety Part 1: General requirements.
16、 It was established on the basis of the 2002 edition of that standard. Amendments and revisions of Part 1 have also to be taken into account and the dates when such changes become applicable will be stated in the relevant amendment or revision of Part 1. This part 2 supplements or modifies the corre
17、sponding clauses of EN 60335-1, so as to convert it into the European Standard: Safety requirements for electric multifunctional shower cabinets. When a particular subclause of Part 1 is not mentioned in this part 2, that subclause applies as far as is reasonable. When this standard states “addition
18、“, “modification“ or “replacement“, the relevant text of Part 1 is to be adapted accordingly. NOTE 1 The following numbering system is used: subclauses, tables and figures that are numbered starting from 101 are additional to those in Part 1; unless notes are in a new subclause or involve notes in P
19、art 1, they are numbered starting from 101, including those in a replaced clause or subclause; additional annexes are lettered AA, BB, etc.; subclauses, notes and annexes that are additional to those in the IEC standard are prefixed with the letter Z. NOTE 2 The following print types are used: requi
20、rements: in roman type; test specifications: in italic type; notes: in small roman type. Words in bold in the text are defined in Clause 3. When a definition concerns an adjective, the adjective and the associated noun are also in bold. There are no special national conditions causing a deviation fr
21、om this European Standard, other than those listed in Annex ZA to EN 60335-1. There are no national deviations from this European Standard, other than those listed in Annex ZB to EN 60335-1. _ BS EN 60335-2-105:2005+A11:2010EN 60335-2-105:2005+A11:2010 (E)Page 2- - 3 EN 63305-2-01:50025 Foreword to
22、amendment A1 The text of document 61/3412/FDIS, future amendment 1 to IEC 60335-2-105:2004, prepared by IEC Technical Committee 61, Safety of household and similar electrical appliances, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as amendment A1 to EN 60335-2-105:2005
23、 on 2008-04-16. The following dates are applicable: - latest date by which the amendment has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2009-02-01 - date on which national standards conflicting with the amendment have to be withdrawn
24、(dow) 2013-05-01 This amendment supplements or modifies the corresponding clauses of EN 60335-2-105:2005. There are no special national conditions causing a deviation from this amendment. There are no national deviations from this amendment. _ Endorsement notice The text of amendment 1:2008 to the I
25、nternational Standard IEC 60335-2-105:2004 was approved by CENELEC as an amendment to the European Standard without any modification. Introduction An investigation by CENELEC TC 61 has shown that all risks from products within the scope of this standard are fully covered by the Low Voltage Directive
26、, 73/23/EEC. For products having mechanical moving parts, a risk assessment in accordance with the Machinery Directive, 98/37/EC, has shown that the risks are mainly of electrical origin and consequently this directive is not applicable. However, the relevant essential safety requirements of the Mac
27、hinery Directive are covered by this standard together with the principal objectives of the Low Voltage Directive. _ Endorsement notice The text of the International Standard IEC 60335-2-105:2004 was approved by CENELEC as a European Standard without any modification. _ In the Bibliography, add the
28、following notes to the standards mentioned: IEC 60335-2-35 NOTE Harmonized as EN 60335-2-35:2002 (not modified). IEC 60335-2-41 NOTE Harmonized as EN 60335-2-41:2003 (not modified). ISO 13732-1 NOTE Harmonized as EN ISO 13732-1:2006 (not modified). _ BS EN 60335-2-105:2005+A11:2010EN 60335-2-105:200
29、5+A11:2010 (E)Page 3Foreword to amendment A11 This amendment to the European Standard EN 60335-2-105:2005 was prepared by the Technical Committee CENELEC TC 61, Safety of household and similar electrical appliances. A proposal for this amendment was discussed during the Kista meeting of CENELEC TC 6
30、1 in June 2008, when it was decided to submit a draft for an amendment to the Unique Acceptance Procedure. The draft was circulated in November 2008 and was approved by CENELEC as amendment A11 to EN 60335-2-105:2005 on 2009-11-01. Attention is drawn to the possibility that some of the elements of t
31、his document may be the subject of patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent rights. The following dates were fixed: latest date by which the amendment has to be implemented at national level by publication of an identical national standard o
32、r by endorsement (dop) 2010-11-01 latest date by which the national standards conflicting with the amendment have to be withdrawn (dow) 2010-11-01 _ BS EN 60335-2-105:2005+A11:2010EN 60335-2-105:2005+A11:2010 (E)Page 460335-2-105 IEC:2004 3 CONTENTS OFREWODR.3 TNIRODTCUOIN.9 nAnex ZC (norma)evit oNr
33、mevita refernecse ot niterantoinal upbilcatiosn wiht triehcorresdnopiuE gnroepap nublicatsnoi . 51063-53-2150 EI2:C400 3 TNOCENTS FOREWORD.3 INTRODUCTION.9 1 Scope.5 2 roNmtaive referencse .5 3 eDfinitions 6 4 Gerenal requirement.6 5 Geenral conditiosn for the etsts6 6 Classification6 7 Marking and
34、nistructinos.6 8 Protection aaginst access to ilvap erts8 9 Starting fo moto-rpoerated appilnacse 8 01 Porew input and curretn .8 11 Heating 8 21 Void .9 31 Leakage current nad electrci strnegth ta operating etmeprature9 41 Trnasietn overvoltaseg .9 51 Moisture resistnace 9 61 Leakage current nad el
35、ectrci strnegth.10 71 Overlaod protection fo trnasformers nad associatde circuist .10 81 Endurnace10 91 Abnormla operation 10 02 Stbaiilty and mechanical hazards .10 12 eMchanical strength .11 22 Construction.11 32 Inetranl wiring.11 42 oCmpnoents.12 52 Supply connection and exetrnla flexible cords
36、21 62 Termnials for external conducotrs.21 72 Provision for aerthing .21 82 Screws nad connections.21 92 Clearances, crepeage distances and soild insulation21 03 eRsistance ot ehat nad fire.21 13 eRsistance ot rusting31 23 Rdaiatinoot ,xicity nad simrali ahzards31 Annexes .41 Annex AA (informative)
37、xEample of a mutlifnuctilano showre cabinet41 5002:501253306 NEAnnex ZC (normative) Normative references to international publications with theircorresponding European publications . 15Annex ZC (normative) Normative references to international publications with their2 Normative references .73 Defini
38、tions 8 4 General requirement.85 General conditions for the tests8 6 Classification8 7 Marking and instructions.8 8 Protection against access to live parts.10 9 Starting of motor-operated appliances .10 10 Power input and current 10 11 Heating .10 12 Void 11 13 Leakage current and electric strength
39、at operating temperature.11 14 Transient overvoltages 1115 Moisture resistance .11 16 Leakage current and electric strength12 17 Overload protection of transformers and associated circuits 12 18 Endurance.12 19 Abnormal operation .12 20 Stability and mechanical hazards 12 21 Mechanical strength 12 2
40、2 Construction13 23 Internal wiring13 24 Components14 25 Supply connection and external flexible cords .14 26 Terminals for external conductors14 27 Provision for earthing 14 28 Screws and connections14 29 Clearances, creepage distances and solid insulation.14 30 Resistance to heat and fire14 31 Res
41、istance to rusting.15 32 Radiation, toxicity and similar hazards.15 Annexes 16 Annex AA (informative) Example of a multifunctional shower cabinet.16 corresponding European publications .18Bibliography.19 Introduction.66 1 Scope.76Annex BB (informative) Example of a separate multifunctional shower un
42、it.17BS EN 60335-2-105:2005+A11:2010EN 60335-2-105:2005+A11:2010 (E)Page 5INTRODUCTION It has been assumed in the drafting of this International Standard that the execution of its provisions is entrusted to appropriately qualified and experienced persons. This standard recognizes the internationally
43、 accepted level of protection against hazards such as electrical, mechanical, thermal, fire and radiation of appliances when operated as in normal use taking into account the manufacturers instructions. It also covers abnormal situations that can be expected in practice and takes into account the wa
44、y in which electromagnetic phenomena can affect the safe operation of appliances.This standard takes into account the requirements of IEC 60364 as far as possible so that there is compatibility with the wiring rules when the appliance is connected to the supply mains. However, national wiring rules
45、may differ. If an appliance within the scope of this standard also incorporates functions that are covered by another part 2 of IEC 60335, the relevant part 2 is applied to each function separately, as far as is reasonable. If applicable, the influence of one function on the other is taken into acco
46、unt. An appliance that complies with the text of this standard will not necessarily be considered to comply with the safety principles of the standard if, when examined and tested, it is found to have other features that impair the level of safety covered by these requirements. An appliance employin
47、g materials or having forms of construction differing from those detailed in the requirements of this standard may be examined and tested according to the intent of the requirements and, if found to be substantially equivalent, may be considered to comply with the standard. When a part 2 standard do
48、es not include additional requirements to cover hazards dealt with in Part 1, Part 1 applies. NOTE 1 This means that the technical committees responsible for the part 2 standards have determined that it is not necessary to specify particular requirements for the appliance in question over and above
49、the general requirements. This standard is a product family standard dealing with the safety of appliances and takes precedence over horizontal and generic standards covering the same subject. NOTE 2 Horizontal and generic standards covering a hazard are not applicable since they have been taken into consideration when developing the general and particular requirements for the IEC 60335 series of standards. For example, in the case of temperature requirements for surface
