1、BRITISH STANDARD BS EN 60335-2-26:2003 +A1:2008 Household and similar electrical appliances Safety Part 2-26: Particular requirements for clocks ICS 39.040.20 BS EN 60335-2-26:2003+A1:2008 This British Standard was published under the authority of the Standards Policy and Strategy Committee on 27 Au
2、gust 2003 BSI 2008 ISBN 978 0 580 64084 1 National foreword This British Standard is the UK implementation of EN 60335-2-26:2003+A1:2008. It is identical with IEC 60335-2-26:2002, incorporating amendment 1:2008. It supersedes BS EN 60335-2-26:2003, which will be withdrawn on 1 May 2013. The start an
3、d finish of text introduced or altered by amendment is indicated in the text by tags. Tags indicating changes to IEC text carry the number of the IEC amendment. For example, text altered by IEC amendment 1 is indicated by !“. The UK participation in its preparation was entrusted by Technical Committ
4、ee CPL/61, Safety of household and similar electrical appliances, to Subcommittee CPL/61/01, Motorized appliance group. A list of organizations represented on this subcommittee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a
5、 contract. Users are responsible for its correct application. Compliance with a British Standard cannot confer immunity from legal obligations. Amendments/corrigenda issued since publication Date Comments 30 November 2008 Implementation of IEC amendment 1:2008 with CENELEC endorsement 1:2008EUROPEAN
6、 STANDARD EN 60335-2-26 +A1 NORME EUROPENNE EUROPISCHE NORM June 2008 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2003 CENEL
7、EC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 60335-2-26:2003 E ICS 13.120; 97.040.50 Supersedes EN 60335-2-26:1996English version Household and similar electrical appliances - Safety Part 2-26: Particular requirements for clocks (IE
8、C 60335-2-26:2002) Appareils lectrodomestiques et analogues - Scurit Partie 2-26: Rgles particulires pour les horloges (CEI 60335-2-26:2002) Sicherheit elektrischer Gerte fr den Hausgebrauch und hnliche Zwecke Teil 2-26: Besondere Anforderungen fr Uhren (IEC 60335-2-26:2002) This European Standard w
9、as approved by CENELEC on 2003-05-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning su
10、ch national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own
11、language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands
12、, Norway, Portugal, Slovakia, Spain, Sweden, Switzerland and United Kingdom. :2003Foreword The text of the International Standard IEC 60335-2-26:2002 (61/2203/FDIS), prepared by the IEC Technical Committee 61, Safety of household and similar electrical appliances, was submitted to the Unique Accepta
13、nce Procedure and was approved by CENELEC as EN 60335-2-26 on 2003-05-01. This European Standard replaces EN 60335-2-26:1996. The following dates are applicable: - latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (
14、dop) 2004-05-01 - date on which national standards conflicting with the EN have to be withdrawn (dow) 2006-05-01 This part 2 has to be used in conjunction with EN 60335-1, Household and similar electrical appliances Safety Part 1: General requirements. It was established on the basis of the 2002 edi
15、tion of that standard. Amendments and revisions of Part 1 have also to be taken into account and the dates when such changes become applicable will be stated in the relevant amendment or revision of Part 1. This part 2 supplements or modifies the corresponding clauses of EN 60335-1, so as to convert
16、 it into the European Standard: Safety requirements for electric clocks. When a particular subclause of Part 1 is not mentioned in this part 2, that subclause applies as far as is reasonable. When this standard states “addition“, “modification“ or “replacement“, the relevant text of Part 1 is to be
17、adapted accordingly. NOTE 1 The following numbering system is used: - subclauses, tables and figures that are numbered starting from 101 are additional to those in Part 1; - unless notes are in a new subclause or involve notes in Part 1, they are numbered starting from 101, including those in a repl
18、aced clause or subclause; - additional annexes are lettered AA, BB, etc.; - subclauses, notes and annexes that are additional to those in the IEC standard are prefixed with the letter Z. NOTE 2 The following print types are used: - requirements: in roman type; - test specifications: in italic type;
19、- notes: in small roman type. Words in bold in the text are defined in Clause 3. When a definition concerns an adjective, the adjective and the associated noun are also in bold. There are no special national conditions causing a deviation from this European Standard, other than those listed in Annex
20、 ZA to EN 60335-1. There are no national deviations from this European Standard, other than those listed in Annex ZB to EN 60335-1. _ Page 2 BS EN 60335-2-26:2003+A1:2008Foreword to amendment A1The text of document 61/3543/FDIS, future amendment 1 to IEC 60335-2-26:2002, prepared by IEC Technical Co
21、mmittee 61, Safety of household and similar electrical appliances, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as amendment A1 to EN 60335-2-26:2003 on 2008-05-01. The following dates are applicable: - latest date by which the amendment has to be implemented at nationa
22、l level by publication of an identical national standard or by endorsement (dop) 2009-02-01 - date on which national standards conflicting with the amendment have to be withdrawn (dow) 2013-05-01 This amendment supplements or modifies the corresponding clauses of EN 60335-2-26:2003. There are no spe
23、cial national conditions causing a deviation from this amendment. There are no national deviations from this amendment. _ Endorsement notice The text of amendment 1:2008 to the International Standard IEC 60335-2-26:2002 was approved by CENELEC as an amendment to the European Standard without any mod
24、ification. Page 3 BS EN 60335-2-26:2003+A1:2008In the Bibliography, add the following note to the standard mentioned: ISO 13732-1 NOTE Harmonized as EN ISO 13732-1:2006 (not modified). _ Introduction An investigation by CENELEC TC 61 has shown that all risks from products within the scope of this st
25、andard are fully covered by the Low Voltage Directive, 73/23/EEC. For products having mechanical moving parts, a risk assessment in accordance with the Machinery Directive, 98/37/EC, has shown that the risks are mainly of electrical origin and consequently this directive is not applicable. However,
26、the relevant essential safety requirements of the Machinery Directive are covered by this standard together with the principal objectives of the Low Voltage Directive. _ Endorsement notice The text of the International Standard IEC 60335-2-26:2002 was approved by CENELEC as a European Standard witho
27、ut any modification. _ Page 4 BS EN 60335-2-26:2003+A1:2008CONTENTS INTRODUCTION 6 1 Scope 7 2 Normative references. 7 3 Definitions . 7 4 General requirement 8 5 General conditions for the tests . 8 6 Classification . 8 7 Marking and instructions 8 8 Protection against access to live parts. 8 9 Sta
28、rting of motor-operated appliances . 8 10 Power input and current. 8 11 Heating 8 12 Void . 8 13 Leakage current and electric strength at operating temperature. 8 14 Transient overvoltages. 9 15 Moisture resistance 9 16 Leakage current and electric strength 9 17 Overload protection of transformers a
29、nd associated circuits. 9 18 Endurance . 9 19 Abnormal operation 9 20 Stability and mechanical hazards. 9 21 Mechanical strength. 9 22 Construction .10 23 Internal wiring.10 24 Components .10 25 Supply connection and external flexible cords.10 26 Terminals for external conductors.10 27 Provision for
30、 earthing10 28 Screws and connections .10 29 Clearances, creepage distances and solid insulation 11 30 Resistance to heat and fire .11 31 Resistance to rusting 11 32 Radiation, toxicity and similar hazards11 Annexes12 Bibliography12 Page 5 BS EN 60335-2-26:2003+A1:200860335-2-26 IEC:2002(E) 5 INTROD
31、UCTION It has been assumed in the drafting of this International Standard that the execution of its provisions is entrusted to appropriately qualified and experienced persons. This standard recognizes the internationally accepted level of protection against hazards such as electrical, mechanical, th
32、ermal, fire and radiation of appliances when operated as in normal use taking into account the manufacturers instructions. It also covers abnormal situations that can be expected in practice and takes into account the way in which electromagnetic phenomena can affect the safe operation of appliances
33、. This standard takes into account the requirements of IEC 60364 as far as possible so that there is compatibility with the wiring rules when the appliance is connected to the supply mains. However, national wiring rules may differ. If an appliance within the scope of this standard also incorporates
34、 functions that are covered by another Part 2 of IEC 60335, the relevant Part 2 is applied to each function separately, as far as is reasonable. If applicable, the influence of one function on the other is taken into account. An appliance that complies with the text of this standard will not necessa
35、rily be considered to comply with the safety principles of the standard if, when examined and tested, it is found to have other features that impair the level of safety covered by these requirements. An appliance employing materials or having forms of construction differing from those detailed in th
36、e requirements of this standard may be examined and tested according to the intent of the requirements and, if found to be substantially equivalent, may be considered to comply with the standard. When a Part 2 standard does not include additional requirements to cover hazards dealt with in Part 1, P
37、art 1 applies. NOTE 1 This means that the technical committees responsible for the Part 2 standards have determined that it is not necessary to specify particular requirements for the appliance in question over and above the general requirements. This standard is a product family standard dealing wi
38、th the safety of appliances and takes precedence over horizontal and generic standards covering the same subject. NOTE 2 Horizontal and generic standards covering a hazard are not applicable since they have been taken into consideration when developing the general and particular requirements for the
39、 IEC 60335 series of standards. For example, in the case of temperature requirements for surfaces on many appliances, generic standards, such as ISO 13732-1 for hot surfaces, are not applicable in addition to Part 1 or art 2 standards. Page 6 BS EN 60335-2-26:2003+A1:2008 PHOUSEHOLD AND SIMILAR ELEC
40、TRICAL APPLIANCES SAFETY Part 2-26: Particular requirements for clocks 1 Scope This clause of Part 1 is replaced by the following. This International Standard deals with the safety of electric clocks having a rated voltage not more than 250 V. NOTE 101 Examples of appliances that are within the scop
41、e of this standard are a l a r m c l o c k s ; spring-driven clocks with an electrically operated winding mechanism; clocks incorporating driving means other than motors. As far as is practicable, this standard deals with the common hazards presented by appliances that are encountered by all persons
42、 in and around the home. However, in general, it does not take into account NOTE 102 Attention is drawn to the fact that for appliances intended to be used in vehicles or on board ships or aircraft, additional requirements may be necessary; in many countries additional requirements are specified by
43、the national health authorities, the national authorities responsible for the protection of labour and similar authorities. NOTE 103 This standard does not apply to battery-operated clocks; appliances intended exclusively for industrial purposes; appliances intended to be used in locations where spe
44、cial conditions prevail, such as the presence of a corrosive or explosive atmosphere (dust, vapour or gas); clocks having other functions, whether or not in combination with time indication, such as master control clocks and timers for cooking ranges, washing machines and similar appliances; clocks
45、for “clocking-in“ purposes; clocks incorporating electronic circuits only (IEC 60065). 2 Normative references This clause of Part 1 is applicable. 3 Definitions This clause of Part 1 is applicable except as follows. persons (including children) whose physical, sensory or mental capabilities; or lack
46、 of experience and knowledge prevents them from using the appliance safely without supervision or instruction; children playing with the appliance. ! “ Page 7 BS EN 60335-2-26:2003+A1:200860335-2-26 IEC:2002(E) 7 3.1.9 Replacement: normal operation operation of the clock under the following conditio
47、ns Spring-driven clocks having an electrically operated winding mechanism are operated as in normal use. Other clocks are operated with the rotor locked. 4 General requirement This clause of Part 1 is applicable. 5 General conditions for the tests This clause of Part 1 is applicable. 6 Classificatio
48、n This clause of Part 1 is applicable. 7 Marking and instructions This clause of Part 1 is applicable. 8 Protection against access to live parts This clause of Part 1 is applicable. 9 Starting of motor-operated appliances This clause of Part 1 is not applicable. 10 Power input and current This claus
49、e of Part 1 is applicable. 11 Heating This clause of Part 1 is applicable. 12 Void 13 Leakage current and electric strength at operating temperature This clause of Part 1 is applicable. Page 8 BS EN 60335-2-26:2003+A1:2008 8 60335-2-26 IEC:2002(E) 14 Transient overvoltages This clause of Part 1 is applicable. 15 Moisture resistance This clause of Part
