1、BRITISH STANDARDBS EN 60335-2-48: 2003+A11:2012Incorporating corrigendum September 2007Household and similar electrical appliances Safety Part 2-48: Particular requirements for commercial electric grillers and toastersICS 97.040.50g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g
2、40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58National forewordThis British Standard is the UK implementation of EN 60335-2-48:2003+A11:2012, incorporating corrigendum September 2007. It is derived from IEC 60335-2-
3、48:2002, incorporating amendment 1:2008. It supersedes BS EN 60335-2-48:2003+A1:2008 which will be withdrawn on 21 December 2014.The start and finish of text introduced or altered by amendment is indicated in the text by tags. Tags indicating changes to IEC text carry the number of the IEC amendment
4、. For example, text altered by IEC amendment 1 is indicated by !“.Where a common modification has been introduced by amendment, the tags carry the number of the amendment. For example, the common modifications introduced by CENELEC amendment A11:2012 are indicated by hi.The UK participation in its p
5、reparation was entrusted by Technical Committee CPL/61, Safety of household and similar electrical appliances, to Subcommittee CPL/61/5, Commercial catering equipment.A list of organizations represented on this subcommittee can be obtained on request to its secretary.This publication does not purpor
6、t to include all the necessary provisions of a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunity from legal obligations.BS EN 60335-2-48:2003+A11:2012This British Standard waspublished under the authorityof the Standards Policy andS
7、trategy Committeeon 16 June 2003 The British Standards Institution 2012. Published by BSI Standards Limited 2012.Amendments/corrigenda issued since publicationAmd. No. Date Comments 17480Corrigendum No. 131 January 2008 English title replaced on front cover and EN title page. Last paragraph replaced
8、 in EN foreword. Addition to Annex ZB deleted30 September 2008 Implementation of IEC amendment 1:2008 with CENELEC endorsement A1:200831 May 2012 Implementation of CENELEC amendment A11:2012ISBN 978 0 580 75897 3EUROPEAN STANDARD EN 60335-2-48:2003+A11 NORME EUROPENNE EUROPISCHE NORM April 20CENELEC
9、 European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2003 CENELEC - All rights of exploitation in any form and by any means reserved worldwi
10、de for CENELEC members. Ref. No. EN 60335-2-48:2003 E ICS 97.040.50 English version Safety Part 2-48: Particular requirements for commercial electric grillers and toasters (IEC 60335-2-48:2002) Appareils lectrodomestiques et analogues Scurit Partie 2-48: Rgles particulires pour les grils et grille-p
11、ain lectriques usage collectif (CEI 60335-2-48:2002) Sicherheit elektrischer Gerte fr den Hausgebrauch und hnliche Zwecke Teil 2-48: Besondere Anforderungen fr elektrische Strahlungsgrillgerte und Toaster fr den gewerblichen Gebrauch (IEC 60335-2-48:2002) This European Standard was approved by CENEL
12、EC on 2003-02-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standard
13、s may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notifie
14、d to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Luxembourg, Malta, Netherlands, Norway, Portugal,
15、Slovakia, Spain, Sweden, Switzerland and United Kingdom. Incorporating corrigendum September 2007Household and similar electrical appliances 12 Foreword The text of document 61E/409/FDIS, future fourth edition of IEC 60335-2-48, prepared by SC 61E of the IEC Technical Committee 61, was submitted to
16、the IEC-CENELEC parallel vote and was approved by CENELEC as EN 60335-2-48 on 2003-02-01. This European Standard replaces EN 60335-2-48:2000. The following dates are applicable: - latest date by which the EN has to be implemented at national level by publication of an identical national standard or
17、by endorsement (dop) 2003-11-01 - date on which national standards conflicting with the EN have to be withdrawn (dow) 2006-02-01 This part 2 has to be used in conjunction with EN 60335-1, Household and similar electrical appliances Safety Part 1: General requirements. It was established on the basis
18、 of the 2002 edition of that standard. Amendments and revisions of Part 1 have also to be taken into account and the dates when such changes become applicable will be stated in the relevant amendment or revision of Part 1. This part 2 supplements or modifies the corresponding clauses of EN 60335-1,
19、so as to convert it into the European Standard: Safety requirements for commercial electric grillers and toasters. When a particular subclause of Part 1 is not mentioned in this part 2, that subclause applies as far as is reasonable. When this standard states “addition“, “modification“ or “replaceme
20、nt“, the relevant text of Part 1 is to be adapted accordingly. NOTE 1 The following numbering system is used: - subclauses, tables and figures that are numbered starting from 101 are additional to those in Part 1; - unless notes are in a new subclause or involve notes in Part 1, they are numbered st
21、arting from 101, including those in a replaced clause or subclause; - additional annexes are lettered AA, BB, etc.; - subclauses, notes and annexes that are additional to those in the IEC standard are prefixed with the letter Z. NOTE 2 The following print types are used: - requirements: in roman typ
22、e; - test specifications: in italic type; - notes: in small roman type. Words in bold in the text are defined in Clause 3. When a definition concerns an adjective, the adjective and the associated noun are also in bold. There are no special national conditions causing a deviation from this European
23、Standard, other than those listed in Annex ZA to EN 60335-1. _ There are no national deviations from this European Standard, other than those listed in Annex ZB to EN 60335-1. BS EN 60335-2-48:2003+A11:2012 EN 60335-2-48:2003+A11:2012 (E)Page2Foreword to amendment A1 The text of document 61E/597/FDI
24、S, future amendment 1 to IEC 60335-2-48:2002, prepared by SC 61E, Safety of electrical commercial catering equipment, of IEC Technical Committee 61, Safety of household and similar electrical appliances, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as amendment A1 to EN
25、 60335-2-48:2003 on 2008-03-01. The following dates are applicable: - latest date by which the amendment has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2008-12-01 - date on which national standards conflicting with the amendment have
26、to be withdrawn (dow) 2011-03-01 This amendment supplements or modifies the corresponding clauses of EN 60335-2-48:2003. There are no special national conditions causing a deviation from this amendment. There are no national deviations from this amendment. _ Endorsement notice The text of amendment
27、1:2008 to the International Standard IEC 60335-2-48:2002 was approved by CENELEC as an amendment to the European Standard without any modification. Introduction _ Endorsement notice The text of the International Standard IEC 60335-2-48:2002 was approved by CENELEC as a European Standard without any
28、modification. _ In the Bibliography, add the following note to the standard mentioned: ISO 13732-1 NOTE Harmonized as EN ISO 13732-1:2006 (not modified). _ BS EN 60335-2-48:2003+A11:2012 EN 60335-2-48:2003+A11:2012 (E)Page3The principle objectives of Low Voltage Directive, 2006/95/EC, are covered in
29、 this standard. The essential safety requirements of the Machinery Directive 2006/42/EC have also been taken into account for appliances covered by this part. hiThis document (EN 60335-2-48:2003/A11:2012) has been prepared by CLC/TC 61, “Safety of household and similar electrical appliances“. The fo
30、llowing dates are fixed: latest date by which the amendment has to be implementedat national level by publication of an identical national standard or by endorsement (dop) 2012-12-21 latest date by which the national standards conflicting with the amendment have to be withdrawn (dow) 2014-12-21 This
31、 amendment supplements or modifies the corresponding clauses of EN 60335-1:2012, EN 60335-2-48:2003 and EN 60335-2-48:2003/A1:2008. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible f
32、or identifying any or all such patent rights. This document has been prepared under a mandate given to CENELEC by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For the relationship with EU Directive(s) see informative Annex Z
33、Z, which is an integral part of this document. Foreword to amendment A11 BS EN 60335-2-48:2003+A11:2012 EN 60335-2-48:2003+A11:2012 (E)Page4CONTENTS INTRODUCTION.6 1 Scope.7 2 Normative references . 3 Definitions 7 4 General requirement.8 5 General conditions for the tests 8 6 Classification9 7 Mark
34、ing and instructions.9 8 Protection against access to live parts10 9 Starting of motor-operated appliances 10 10 Power input and current .11 11 Heating 11 12 Void .12 13 Leakage current and electric strength at operating temperature12 14 Transient overvoltages .12 15 Moisture resistance 12 16 Leakag
35、e current and electric strength.13 17 Overload protection of transformers and associated circuits .13 18 Endurance13 19 Abnormal operation 13 20 Stability and mechanical hazards .14 21 Mechanical strength .14 22 Construction.14 23 Internal wiring.15 24 Components .15 25 Supply connection and externa
36、l flexible cords 15 26 Terminals for external conductors.16 27 Provision for earthing .16 28 Screws and connections.16 29 Clearances, creepage distances and solid insulation 16 30 Resistance to heat and fire.17 31 Resistance to rusting1732 Radiation, toxicity and similar hazards1 Annexes .19 Bibliog
37、raphy Figure 101 Splash apparatus .18 BS EN 60335-2-48:2003+A11:2012 EN 60335-2-48:2003+A11:2012 (E)Page57721Annex ZE.19 Annex ZZ.21 hihiINTRODUCTION It has been assumed in the drafting of this International Standard that the execution of its provisions is entrusted to appropriately qualified and ex
38、perienced persons. This standard takes into account the requirements of IEC 60364 as far as possible so that there is compatibility with the wiring rules when the appliance is connected to the supply mains. However, national wiring rules may differ. If an appliance within the scope of this standard
39、also incorporates functions that are covered by another part 2 of IEC 60335, the relevant part 2 is applied to each function separately, as far as is reasonable. If applicable, the influence of one function on the other is taken into account. An appliance that complies with the text of this standard
40、 will not necessarily be considered to comply with the safety principles of the standard if, when examined and tested, it is found to have other features that impair the level of safety covered by these requirements. An appliance employing materials or having forms of construction differing from tho
41、se detailed in the requirements of this standard may be examined and tested according to the intent of the requirements and, if found to be substantially equivalent, may be considered to comply with the standard. This standard recognizes the internationally accepted level of protection against hazar
42、ds such as electrical, mechanical, thermal, fire and radiation of appliances when operated as in normal use taking into account the manufacturers instructions. It also covers abnormal situations that can be expected in practice and takes into account the way in which electromagnetic phenomena can af
43、fect the safe operation of appliances. When a Part 2 standard does not include additional requirements to cover hazards dealt with in Part 1, Part 1 applies. NOTE 1 This means that the technical committees responsible for the Part 2 standards have determined that it is not necessary to specify parti
44、cular requirements for the appliance in question over and above the general requirements. This standard is a product family standard dealing with the safety of appliances and takes precedence over horizontal and generic standards covering the same subject. NOTE 2 Horizontal and generic standards cov
45、ering a hazard are not applicable since they have been taken into consideration when developing the general and particular requirements for the IEC 60335 series of standards. For example, in the case of temperature requirements for surfaces on many appliances, generic standards, such as ISO 13732-1
46、for hot surfaces, are not applicable in addition to Part 1 or Part 2 standards. BS EN 60335-2-48:2003+A11:2012 EN 60335-2-48:2003+A11:2012 (E)Page6HOUSEHOLD AND SIMILAR ELECTRICAL APPLIANCES SAFETY Part 2-48: Particular requirements for commercial electric grillers and toasters 1 Scope This clause o
47、f Part 1 is replaced by the following. This International Standard deals with the safety of electrically operated commercial grillers and toasters not intended for household use, their rated voltage being not more than 250 V for single-phase appliances connected between one phase and neutral, and 48
48、0 V for other appliances. Rotary or continuous grillers and toasters and similar appliances intended for grilling by radiant heat such as rotisseries, salamanders, etc. are within the scope of this standard. NOTE 101 These appliances are used, for example in restaurants, canteens, hospitals and comm
49、ercial enterprises such as bakeries, butcheries, etc. The electrical part of appliances making use of other forms of energy is also within the scope of this standard. As far as is practicable, this standard deals with the common hazards presented by these types of appliances. NOTE 102 Attention is drawn to the fact that for appliances intended to be used in vehicles or on board ships or aircraft, additional requirements may be necessary; in many countries additional requirements are s
