1、g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58BRITISH STANDARDBS EN 60371-3-9:1996Incorporating amendment no. 1Specification forInsulating materia
2、ls based on mica Part 3: Specifications for individual materials Sheet 9: Moulding micaniteThe European Standard EN 60371-3-9:1995, incorporating amendment A1:2007, has the status of a British StandardICS 29.040.20BS EN 60371-3-9:1996This British Standard was published under the authority of the Sta
3、ndards Board and comes into effect on 15 April 1996 BSI 2007 ISBN 978 0 580 59337 6National forewordThis British Standard is the UK implementation of EN 60371-3-9:1995, incorporating amendment A1:2007. It is identical with IEC 371-3-9:1995, incorporating corrigendum August 1995 and amendment 1:2007.
4、 The start and finish of text introduced or altered by amendment is indicated in the text by tags !“. Tags indicating changes to IEC text carry the number of the IEC amendment. For example, text altered by IEC amendment 1 is indicated by !“.The UK participation in its preparation was entrusted to Te
5、chnical Committee GEL/15, Insulating materials.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.Compliance with
6、a British Standard cannot confer immunity from legal obligations.Amendments issued since publicationAmd. No. Date Comments17203 31 July 2007 See national forewordEUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 60371-3-9 September 1995 +A1 May 2007ICS 29.040.20 Descriptors: Electrical insulating ma
7、terials, solid electrical insulating materials, electrical insulating paper, micaceous products, designation, specifications, composition, compositional tolerances, dimensions, dielectric strength, packingEnglish versionInsulating materials based on micaPart 3: Specifications for individual material
8、sSheet 9: Moulding micanite(IEC 371-3-9:1995 + corrigendum 1995)Matriaux isolants base de mica Partie 3: Spcifications pour matriaux particuliers Feuille 9: Micanite moulable(CEI 371-3-9:1995 + corrigendum 1995)Glimmererzeugnisse fr elektrotechnische Zwecke Teil 3: Bestimmungen fr einzelne Materiali
9、en Blatt 9: Formmikanit(IEC 371-3-9:1995 + Corrigendum 1995)This European Standard was approved by CENELEC on 1995-07-04. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard w
10、ithout any alteration.Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member.This European Standard exists in three official versions (English, French, German). A version in any other langu
11、age made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions.CENELEC members are the national electrotechnical committees of Austria, Belgium, Denmark, Finland, France, Germany, Greece,
12、 Iceland, Ireland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Switzerland and United Kingdom.CENELECEuropean Committee for Electrotechnical StandardizationComit Europen de Normalisation ElectrotechniqueEuropisches Komitee fr Elektrotechnische NormungCentral Secretariat: rue de
13、Stassart 35, B-1050 Brussels 1995 Copyright reserved to CENELEC membersRef. No. EN 60371-3-9:1995 EEN 60371-3-9:19952 BSI 2007ForewordThe text of document 15C/476/DIS, future edition 1 of IEC 371-3-9, prepared by SC 15C, Specifications, of IEC TC 15, Insulating materials, was submitted to the IEC-CE
14、NELEC parallel vote and was approved by CENELEC with its corrigendum August 1995 as EN 60371-3-9 on 1995-07-04.The following dates were fixed: Annexes designated “normative” are part of the body of the standard. In this standard, Annex ZA is normative. Annex ZA has been added by CENELEC.Foreword to
15、amendment A1The text of document 15/362/FDIS, future amendment 1 to IEC 60371-3-9:1995, prepared by IEC TC 15, Solid electrical insulating materials, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as amendment A1 to EN 60371-3-9:1995 on 2007-05-01.The following dates were
16、 fixed: Endorsement noticeThe text of amendment 1:2007 to the International Standard IEC 60371-3-9:1995 was approved by CENELEC as an amendment to the European Standard without any modification. latest date by which the EN has to be implemented at national level by publication of an identical nation
17、al standard or by endorsement (dop) 1996-08-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 1996-08-01 latest date by which the amendment has to be implemented at national level by publication of an identical national standard or by endorsement (dop)
18、 2008-02-01 latest date by which the national standards conflicting with the amendment have to be withdrawn (dow) 2010-05-01EN 60371-3-9:1995 BSI 2007 3Introduction!This part of IEC 60371 forms part of a series which deals with insulating materials built up from mica splittings or mica paper, with o
19、r without reinforcement, and with mica paper in its pure state for use in electrical equipment.IEC 60371 consists of three parts under the main title Insulating materials based on mica:Part 1: Definitions and general requirements Part 2: Methods of test Part 3: Specifications for individual material
20、sThis standard contains one of the sheets comprising Part 3:Sheet 9: Moulding micanite.“1 ScopeThis International Standard specifies the requirements for different types of moulding micanite. They are composed of mica splittings or mica paper, with or without reinforcement, bonded with a suitable bi
21、nder and may be supplied as sheets or rolls.Moulding micanites with B-stage resins are of a consistency ranging from rigid to soft. All types are mouldable when heated.This specification covers material having a nominal thickness from 0,10 mm to 7 mm.Materials which conform to this specification mee
22、t established levels of performance. However, the selection of a material for a specific application should be based on the actual requirements necessary for adequate performance in that application and not based on this specification alone.!Safety warning It is the responsibility of the user of the
23、 methods contained or referred to in this document to ensure that they are used in a safe manner.“2 Normative references!The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest
24、 edition of the referenced document (including any amendments) applies. IEC 60243-1:1998, Electrical strength of insulating materials Test methods Part 1: Tests at power frequencies. IEC 60371-2:2004, Specification for insulating materials based on mica Part 2: Methods of test. IEC 60371-3-2:2005, I
25、nsulating materials based on mica Part 3: Specifications for individual materials Sheet 2: Mica paper. IEC 60554-3-2:1983, Specification for cellulosic papers for electrical purposes Part 3: Specifications for individual materials Sheet 2: Capacitor paper. IEC 60674-3-2:1992, Specification for plast
26、ic films for electrical purposes Part 3: Specifications for individual materials Sheet 2: Requirements for balanced biaxially oriented polyethylene terephthalate (PET) films used for electrical insulation. “3 DesignationMaterial shall be designated as shown in Table 1.4 Requirements: raw materials4.
27、1 Mica splittings!Mica splittings referred to in this specification shall comply with the requirements of IEC 60371-2.“4.2 Mica paperMica paper referred to in this specification shall comply with the requirements of !IEC 60371-3-2.“4.3 Glass fabricThe glass yarn shall be continuous filament glass ma
28、de from E-glass. The glass fabric shall be in the loom state and have a size content not greater than 3 %.4.4 Polyester filmPlastic film used as backing material shall be made from PET and shall comply with the requirements of !IEC 60674-3-2.“4.5 Capacitor paperThe capacitor paper shall comply with
29、the requirements of !IEC 60554-3-2.“4.6 ResinsAny shellac, alkyd, epoxy or silicone resin system may be used which enables the material to meet the requirements of this specification; other binders may be used, subject to the purchase contract.The resin content shall be subject to purchase contract
30、and the limits of Table 1.5 Requirements: composition and tolerances!When tested by the method of Clause 7 of IEC 60371-2, the composition of the products shall lie within the limits given in Table 1.“EN 60371-3-9:1995 BSI 20074Table 1 Designation, composition and tolerances6 Requirements of materia
31、ls (as received)6.1 GeneralAll materials in any one consignment shall have the same properties, within the limits of this specification, throughout the length of each roll or number of sheets.The surfaces shall be uniform and free from defects such as bubbles, pin-holes, creases and flaws.Material s
32、upplied in rolls shall be capable of being unrolled continuously without damage, and the force required to unroll the material shall be substantially uniform.Where interleaving is necessary or required by the purchaser, it shall not have any deleterious effects.6.2 Width, lengthThe width and the len
33、gth of the material shall not differ by more than the amount shown in Table 2. Table 2 Tolerances on width and length6.3 Thickness!The thickness when measured in accordance with 4.1.1 of IEC 60371-2 shall be within the appropriate limits given in Table 3.“For material of nominal thickness greater th
34、an 1 mm, the permissible tolerance should be subject to the purchase contract. Type Mica raw materialBinderSurfacing materialNominal thickness rangemmThickness toleranceTypeContent % max.MS1MS2MS3MS4MS5MS6MS7Mica splittings, clear, muscoviteMica splittings, clear, muscoviteMica splittings, spotted,
35、muscoviteMica splittings, clear, muscoviteMica splittings, clear, muscoviteMica splittings, clear, muscoviteMica splittings, clear, muscoviteShellacShellacShellacShellacShellacAlkydSilicone15252520303030Capacitor paper on both sides0,20 to 2,000,10 to 1,000,10 to 7,000,20 to 2,000,20 to 2,000,20 to
36、2,000,20 to 2,00According to Table 2MP1MP2MP3MP4MP5Mica paper, muscoviteMica paper, muscoviteMica paper, muscoviteMica paper, muscoviteMica paper, phlogopiteEpoxyEpoxyEpoxySiliconeSilicone2540253030Glass fabric on both sidesPolyester film on both sides0,20 to 1,000,13 to 2,000,20 to 1,000,13 to 1,00
37、0,13 to 1,00According to Table 2Width LengthMaster sheetMaster rollCut piece (U 50 mm) 5 % 5 %+50 mm+50 mm+50 mm+0,30 mEN 60371-3-9:1995 BSI 2007 5Table 3 Permissible thickness ranges and tolerances7 Requirements (after curing)When required by the purchase contract, the supplier shall provide eviden
38、ce that the material meets the requirements of this clause. Curing conditions shall be according to the data given by the manufacturer (curing time, temperature and pressure).7.1 Thermal endurance!This should be carried out in accordance with Clause 21 of IEC 60371-2.“ Both the choice of end-point c
39、riterion and the required temperature index should be subject to purchase contract.NOTE This determination need not be repeated unless the manufacturer has made a significant change in the composition or method of manufacture of the material.7.2 Electrical strength!When tested by the method of Claus
40、e 16 of IEC 60371-2 with electrodes according to 4.1.1.1 (25/75 mm diameter) of IEC 60243-1, the electrical strength shall meet the requirements of Table 4.“ Table 4 Electric strength8 PackingThe materials should be packaged to ensure adequate protection during transport, handling and storage. Any n
41、ecessary packing requirements should be the subject of purchase contract.Each package containing a number of unit packs shall have the following information, clearly and indelibly marked on it:a) description of the material and the number of this specification;b) for material delivered in rolls, the
42、 width of the material and the length per roll;c) for material delivered in sheets, the dimensions of the sheet;d) the number of sheets/rolls in each package;e) the date of manufacture;f) shelf-life and storage conditions.The manufacturers reference number and batch number shall be identified on eac
43、h package or roll.TypeNominal thickness rangemmPermissible thicknessPermissible tolerancemmIndividual measurementsmmMS1 to MS70,10,3 0,30,5 0,50,8 0,81,0 0,08 0,12 0,14 0,15 0,12 0,17 0,25 0,35MP1 to MP50,10,3 0,30,5 0,50,8 0,81,0 0,07 0,08 0,10 0,10 0,10 0,12 0,15 0,15Type Electric strengthkV/mm mi
44、nimumMS1MS2MS3MS4MS5MS6MS781088888MP1MP2MP3MP4MP51010121010EN 60371-3-9:19956 BSI 2007Annex ZA (normative) Normative references to international publications with their corresponding European publicationsThe following referenced documents are indispensable for the application of this document. For d
45、ated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies.Publication Year
46、Title EN/HD YearIEC 60243-1 1998 Electrical strength of insulating materials Test methods Part 1: Tests at power frequencies EN 60243-1 1998IEC 60371-2 2004 Specification for insulating materials based on mica Part 2: Methods of test EN 60371-2 2004IEC 60371-3-2 2005 Insulating materials based on mi
47、ca Part 3: Specifications for individual materials Sheet 2: Mica paper EN 60371-3-2 + corr. November2006 2006IEC 60554-3-2 1983 Specification for cellulosic papers for electrical purposes Part 3: Specifications for individual materials Sheet 2: Capacitor paper IEC 60674-3-2 1992 Specification for pl
48、astic films for electrical purposes - Part 3: Specifications for individual materials Sheet 2: Requirements for balanced biaxially oriented polyethylene terephthalate (PET) films used for electrical insulation EN 60674-3-2 1998EN 60371-3-9:1996 BSI 2007List of referencesSee national foreword.BS EN 6
49、0371-3-9:1996 BSI389 Chiswick High RoadLondonW4 4ALBSI British Standards InstitutionBSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter.RevisionsBritish Standards are updated by amendment or revision. Users of British Standards should make sure that they possess the latest amendments or editions.It is the constant aim of BSI to improve
