1、BRITISH STANDARD BS EN 60384-22-1:2004 Fixed capacitors for use in electronic equipment Part 22-1: Blank detail specification: Fixed surface mount multilayer capacitors of ceramic dielectric, Class 2 Assessment level EZ ICS 31.060.10 Incorporating corrigenda September 2004 and March2010National fore
2、word This British Standard is the UK implementation of EN 60384-22-1:2004. It is identical to IEC 60384-22-1:2004 incorporating corrigendum September 2004. Together with BS EN 60384-21-1:2004 it supersedes BS EN 132101:1997 which is withdrawn. Together with BS EN 60384-21:2004, BS EN 60384-21-1:2004
3、 and BS EN 60384-22:2004 it supersedes BS QC 301900:1992 and BS QC 301901:1992 which are withdrawn. The UK participation in its preparation was entrusted to Technical Committee EPL/40X, Capacitors and resistors for electronic equipment. A list of organizations represented on this committee can be ob
4、tained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. Compliance with a British Standard cannot confer immunity from legal obligations. BS EN 60384-22-1:2004 This British Standar
5、d was published under the authority of the Standards Policy and Strategy Committee on 17 January 2005 BSI 2010 Amendments/corrigenda issued since publication Date Comments 31 March 2010 Supersession text amended ISBN 978 0 580 70393 5EUROPEAN STANDARD EN603842 2 1 NORME EUROPENNE EUROPISCHE NORM Nov
6、ember 2004 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CentralSecre tariat: rued eStassart 35, B 10 50B russels 2004 CENELEC - All rights of exploitation in any form and by any means
7、reserved worldwide for CENELEC members. Ref. No. EN 60384-22-1:2004 E ICS 31.060.10 Partially supersedes EN 132101:1996English version Fixedcapacitorsforuse inelectronicequi pment Part221: Blankdetailspec ification: Fixedsur facemountmul tilayercapacitorsof ceramicdi electric,Class2 AssessmentlevelE
8、Z (IEC 60384-22-1:2004 + corrigendum 2004) Condensateurs fixes utiliss dans les quipements lectroniques Partie 22-1: Spcification particulire cadre: Condensateurs multicouches fixes pour montage en surface pour dilectriques en cramique, classe 2 Niveau dvaluation EZ (CEI 60384-22-1:2004 + corrigendu
9、m 2004) Festkondensatoren zur Verwendung in Gerten der Elektronik Teil 22-1: Vordruck fr Bauartspezifikation: Oberflchenmontierbare Vielschichtkeramik-Festkondensatoren, Klasse 2 Bewertungsstufe EZ (IEC 60384-22-1:2004 + corrigendum 2004) This European Standard was approved by CENELEC on 2004-09-01.
10、 CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained
11、 on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central
12、Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands,
13、 Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. EN 68304-22-12:400 - - 2 Foreword The text of document 40/1423/FDIS, future edition 1 of IEC 60384-22-1, prepared by IEC TC 40, Capacitors and resistors for electronic equipment, was submitted to the IEC-CE
14、NELEC parallel vote and was approved by CENELEC as EN 60384-22-1 on 2004-09-01. This European Standard, together with EN 60384-21-1:2004, supersedes EN 132101:1996. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical nati
15、onal standard or by endorsement (dop) 2005-06-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2007-09-01 Annex ZA has been added by CENELEC. _ Endorsementnotice The text of the International Standard IEC 60384-22-1:2004 + corrigendum September 2004 w
16、as approved by CENELEC as a European Standard without any modification. _ Page2 BS EN 60384-22-1:2004 EN 60384-22-1:2004 (E) CONTENTS INTRODUCTION . 4 1 General data 6 1.1 Recommended method(s) of mounting (to be inserted). 6 1.2 Dimensions. 6 1.3 Ratings and characteristics 6 1.4 Normative referenc
17、es.7 1.5 Marking. 7 1.6 Ordering information.7 1.7 Certified records of released lots 7 1.8 Additional information (not for inspection purposes) 7 1.9 Additional or increased severities or requirements to those specified in the generic and/or sectional specification 7 2 Inspection requirements. 8 2.
18、1 Procedures. 8 Annex ZA (normative) Normative references to international publications with their corresponding European publications . 15 Table 1 Case size reference and dimensions 6 Table 2 Values of capacitance and of voltage related to case sizes 6 Table 3 Other characteristics 7 Table 4 Test s
19、chedule for quality conformance inspection. 8 Page3 BS EN 60384-22-1:2004 EN 60384-22-1:2004 (E)063-4822-1 CEI:0240(E) 5 INTRODUCTION Blank detail specification A blank detail specification is a supplementary document to the sectional specification and contains requirements for style, layout and min
20、imum content of detail specifications. Detail specifications not complying with these requirements may not be considered as being in accordance with IEC specifications nor shall they so be described. In the preparation of detail specifications the content of 1.4 of the sectional specification shall
21、be taken into account. The numbers between square brackets on the first page of the detail specification correspond to the following information which shall be inserted in the position indicated. Identification of the detail specification (1) The “International Electrotechnical Commission” or the Na
22、tional Standards Organization under whose authority the detail specification is drafted. (2) The IEC or National Standards number of the detail specification, date of issue and any further information required by the national system. (3) The number and issue number of the IEC or national generic spe
23、cification. (4) The IEC number of the blank detail specification. Identification of the capacitor (5) A short description of the type of capacitor. (6) Information on typical construction (when applicable). (7) Outline drawing with main dimensions which are of importance for interchangeability and/o
24、r reference to the national or international documents for outlines. Alternatively, this drawing may be given in an annex to the detail specification. (8) Application or group of applications covered and/or assessment level. (9) Reference data on the most important properties, to allow comparison be
25、tween the various capacitor types. Page4 BS EN 60384-22-1:2004 EN 60384-22-1:2004 (E) 6 063-4822-1 CEI:0240(E) (1) IEC 60384-22-1-ZZZ QC 30XXXX-ZZZ (2) ELECTRONIC COMPONENTS OF ASSESSED QUALITY IN ACCORDANCE WITH : (3) IEC 60384-22-1 QC30 XXXX (4) FIXED SURFACE MOUNT MULTILAYER CAPACITORS OF CERAMIC
26、 DIELECTRIC, CLASS 2 (5) (6) Outline drawing : (see Table 1) (angle projection) (Other shapes are permitted within the dimensions given) (7) Assessment level: EZ (8) Information on the availability of components qualified to this detail specification is given in the IECQ 001005. (9) Page5 BS EN 6038
27、4-22-1:2004 EN 60384-22-1:2004 (E)063-4822-1 CEI:0240(E) 7 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT Part 22-1: Blank detail specification: Fixed surface mount multilayer capacitors of ceramic dielectric, Class 2 Assessment level EZ 1 General data 1.1 Recommended method(s) of mounting (to be
28、inserted) (See 1.4.2 of IEC 60384-22). 1.2 Dimensions Table 1 Case size reference and dimensions Dimension (mm) Case size reference L 1 W H L 2 L 3 L 4 - When there is no case size reference, Table 1 may be omitted and the dimensions shall be given in Table 2, which then becomes Table 1. The dimensi
29、ons shall be given as maximum dimensions or as nominal dimensions with a tolerance. 1.3 Ratings and characteristics Rated capacitance range (see Table 2) Tolerance on rated capacitance Rated voltage (see Table 2) Category voltage (if applicable) (see Table 2) Climatic category Rated temperature Cate
30、gory temperature (if applicable) Tangent of loss angle Insulation resistance Temperature characteristics of capacitance % Table 2 Values of capacitance and of voltage related to case sizes Rated voltage Category voltage 1)Case size Case size Case size Case size Rated capacitance (in pF, nF and/ or F
31、) 1)If different from the rated voltage. Page6 BS EN 60384-22-1:2004 EN 60384-22-1:2004 (E) 8 063-4822-1 CEI:0240(E) 1.4 Normative references IEC 60384-1:1999, Fixed capacitors for use in electronic equipment Part 1: Generic specification. IEC 60384-22:200X, Fixed capacitors for use in electronic eq
32、uipment Part 22: Sectional specification: Fixed surface mount multilayer capacitors of ceramic dielectric, Class 2 1.5 Marking The marking of the capacitor, if applied, and the package shall be in accordance with the requirements of 1.6 of IEC 60384-22. NOTE The details of the marking of the compone
33、nt and package shall be given in full in the detail specification. 1.6 Ordering information Orders for capacitors covered by this specification shall contain, in clear or in coded form, the following minimum information: a) Rated capacitance. b) Tolerance on rated capacitance. c) Rated DC voltage. d
34、) Temperature characteristics of capacitance. e) Number and issue reference of the detail specification and style reference. 1.7 Certified records of released lots Required/not required. 1.8 Additional information (not for inspection purposes) 1.9 Additional or increased severities or requirements t
35、o those specified in the generic and/or sectional specification NOTE Additions or increased requirements should be specified only when essential. Table 3 Other characteristics This table is to be used for defining characteristics which are additional to or more severe than those given in the section
36、al specification. Page7 BS EN 60384-22-1:2004 EN 60384-22-1:2004 (E)063-4822-1 CEI:0240(E) 9 2 Inspection requirements 2.1 Procedures 2.1.1 For qualification approval, the procedures shall be in accordance with 3.4 of IEC 60384-22. 2.1.2 For quality conformance inspection, the test schedule (Table 4
37、) includes sampling, periodicity, severities and requirements. The formation of inspection lots is covered by 3.5.1 of IEC 60384-22. Table 4 Test schedule for quality conformance inspection Number of specimens and number of non- conformances 2) Subclause number and test 1) D or ND Conditions of test
38、 1) IL nc Performance requirements 1) Group A inspection (lot-by-lot) Subgroup A0 ND 100 % 3) 4.5.1 Capacitance Frequency: Hz Measuring voltage: V r.m.s Within specified tolerance 4.5.2 Tangent of loss angle (tan )Frequency and measuring voltage same as in 4.5.1 As in 4.5.2 4.5.3 Insulation resistan
39、ceSee detail specification for the method As in 4.5.3.3 4.5.4 Voltage proof See detail specification for the method No breakdown or flashover Page8 BS EN 60384-22-1:2004 EN 60384-22-1:2004 (E) 01 68304-22-1 CEI:0240(E) Table 4 Test schedule for Quality Conformance Inspection (continued) Number of sp
40、ecimens and number of non- conformances 2) Subclause number and test 1) D or ND Conditions of test 1) IL nc Performance requirements 1) Subgroup A1 4.4 Visual inspection ND S-4 4) 0 As in 4.4.2 Legible marking and as specified in 1.5 of this specification Subgroup A2 4.4 Dimension 5) ND S-3 4) 0 As
41、specified in Table 1 of this specification Group B inspection (lot-by-lot) Subgroup B1 D S-3 4) 0 4.5.5 Impedance (if required)Frequency: 100 kHz See detail specification 4.5.6 ESR (if required) Frequency: 100 kHz See detail specification 4.10 Solderability See detail specification for the method 4.
42、10.3 Final measurementsVisual examination As in 4.10.3 4.17 Solvent resistance of the marking (if required) 6)Solvent: Solvent temperature: Method 1 Rubbing material: cotton wool Recovery: Legible marking Subgroup B2 4.6 Temperature characteristics of capacitance 7) ND Special preconditioning as in
43、4.1 S-2 4) 0 C/C : As in 4.6.3 Page9 BS EN 60384-22-1:2004 EN 60384-22-1:2004 (E)063-4822-1 CEI:0240(E) 11 Table 4 Test schedule for Quality Conformance Inspection (continued) Number of specimens and number of non- conformances 2) Subclause number and test 1) D or ND Conditions of test 1) pn c Perfo
44、rmance requirements 1) Group C inspection (periodic) Subgroup C1 D 3 12 0 8) Test Ua, Force: 2,5 N Test Ub, Method 1, Force: 2,5 N Number of bends: 1 4.15 Robstness of termination (if required) Visual examination No visible damage Special preconditioning as in 4.1 4.9.2 Initial measurementCapacitanc
45、e 4.9 Resistance to soldering heatSee detail specification for the method Recovery: 24 h 2 h 4.9.5 Final measurementsVisual examination Capacitance As in 4.9.5 As in 4.9.5 4.16 Component solvent resistance (if required)Solvent: Solvent temperature: Method 2 Recovery: See detail specification Subgrou
46、p C2 4.8 Substrate bending test 9) Deflection: Number of bends: See detail specification 4.8.1 Initial measurement Capacitance 4.8.2 Final inspection Capacitance (with printed board in bent position) C/C 10 % D Visual examination 3 12 0 8) No visible damage Page10 BS EN 60384-22-1:2004 EN 60384-22-1
47、:2004 (E) 21 68304-22-1 CEI:0240(E) Table 4 Test schedule for Quality Conformance Inspection (continued) Number of specimens and number of non- conformances 2) Subclause number and test 1) D or ND Conditions of test 1) pnc Performance requirements 1) Subgroup C3 4.3 Mounting 10) Substrate material:
48、Visual examination Capacitance As in 4.4.2 Within specified tolerance D Tangent of loss angle Insulation resistance Voltage proof As in 4.5.2 As in 4.5.3.3 No breakdown or flashover Page11 BS EN 60384-22-1:2004 EN 60384-22-1:2004 (E)063-4822-1 CEI:0240(E) 31 Table 4 Test schedule for Quality Conformance Inspection (continued) Number of specimens and number of non- conformances 2) Subclause number and test 1) D or ND Conditions of test 1) pnc Performance requirements 1) Subgroup C3.1 4.7 Shear test 11) Visual inspection No visible damage Special preconditioning as in 4.1 4.11.2 Initi
