1、BRITISH STANDARDBS EN 60384-9-1:2005Fixed capacitors for use in electronic equipment ICS 31.060.20g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58Pa
2、rt 9-1: Blank detail specification: Fixed capacitors of ceramic dielectric, Class 2 Assessment level EZIncorporating corrigendum March 2010National forewordThis British Standard is the UK implementation of EN 60384-9-1:2005. It is identical with IEC 60384-9-1:2005. It supersedes BS CECC 30701:1993 a
3、nd BS QC 300701:1993 which are withdrawn.The UK participation in its preparation was entrusted to Technical Committee EPL/40X, Capacitors and resistors for electronic equipment.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not
4、 purport to include all the necessary provisions of a contract. Users are responsible for its correct application.Compliance with a British Standard cannot confer immunity from legal obligations.BS EN 60384-9-1:2005This British Standard was published under the authority of the Standards Policy and S
5、trategy Committee on 12 January 2006 BSI 2010Amendments/corrigenda issued since publicationDate Comments 31 March 2010 Supersession text amended ISBN 978 0 580 70369 0EUROPEAN STANDARD EN 60384-9-1 NORME EUROPENNE EUROPISCHE NORM June 2005 CENELEC European Committee for Electrotechnical Standardizat
6、ion Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2005 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 60384-9-1:2005 E
7、ICS 31.060.20 English version Fixed capacitors for use in electronic equipment Part 9-1: Blank detail specification: Fixed capacitors of ceramic dielectric, Class 2 Assessment level EZ (IEC 60384-9-1:2005) Condensateurs fixes utiliss dans les quipements lectroniques Partie 9-1: Spcification particul
8、ire-cadre: Condensateurs fixes dilectrique en cramique de classe 2 Niveau dassurance EZ (CEI 60384-9-1:2005) Festkondensatoren zur Verwendung in Gerten der Elektronik Teil 9-1: Vordruck fr Bauartspezifikation -Keramik-Festkondensatoren, Klasse 2 - Bewertungsstufe EZ (IEC 60384-9-1:2005) This Europea
9、n Standard was approved by CENELEC on 2005-05-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references c
10、oncerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member i
11、nto its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, L
12、atvia, Lithuania, Luxembourg, Malta, Netherlands, Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. 2 Foreword The text of document 40/1531/FDIS, future edition 2 of IEC 60384-9-1, prepared by IEC TC 40, Capacitors and resistors for electronic equipment, wa
13、s submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 60384-9-1 on 2005-05-01. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2006-03-01 latest date
14、by which the national standards conflicting with the EN have to be withdrawn (dow) 2008-05-01 Annex ZA has been added by CENELEC. _ Endorsement notice The text of the International Standard IEC 60384-9-1:2005 was approved by CENELEC as a European Standard without any modification. _ EN 60384-9-1:200
15、5BS EN 60384-9-1:2005 3 EN 60384-9-1:2005 FIXED CAPACITORS FOR USE IN ELECTRONIC EQUIPMENT Part 9-1: Blank detail specification: Fixed capacitors of ceramic dielectric, Class 2 Assessment level EZ Blank detail specification A blank detail specification is a supplementary document to the sectional sp
16、ecification and contains requirements for style and layout and minimum content of detail specifications. Detail specifications not complying with these requirements may not be considered as being in accordance with IEC specifications nor shall they be so described. In the preparation of detail speci
17、fications, the content of 1.4 of the sectional specification shall be taken into account. The numbers between brackets on the first page correspond to the following information, which shall be inserted in the position indicated: Identification of the detail specification 1 The “International Electro
18、technical Commission“ or the National Standards Organization under whose authority the detail specification is drafted. 2 The IEC or National Standards number of the detail specification, date of issue and any further information required by the national system. 3 The number and issue number of the
19、IEC or national generic specification. 4 The IEC number of the blank detail specification. Identification of the capacitor 5 A short description of the type of capacitor. 6 Information on typical construction (when applicable). When the capacitor is not designed for use in printed board applications
20、, this shall be clearly stated in the detail specification in this position. 7 Outline drawing with main dimensions, which are of importance for interchangeability and/or reference to the national or international documents for outlines. Alternatively, this drawing may be given in an appendix to the
21、 detail specification. 8 Application or group of applications covered and/or assessment level. The assessment level(s) to be used in a detail specification shall be selected from the sectional specification, 3.5.4. This implies that one blank detail specification may be used in combination with seve
22、ral assessment levels provided the grouping of the tests does not change. 9 Reference data on the most important properties, to allow comparison between the various capacitor types. BS EN 60384-9-1:2005EN 60384-9-1:2005 4 1 IEC 60384-9-1-XXX 2 QC 300701-XXX IEC 60384-9-1 4 QC 300701 ELECTRONIC COMPO
23、NENTS OF ASSESSED QUALITY IN ACCORDANCE WITH: 3 FIXED CAPACITORS OF 5 CERAMIC DIELECTRIC, CLASS 2 6 Outline drawing: (see Table 1) ( angle projection) 7 (Other shapes are permitted within the dimensions given) Assessment level(s): EZ 8 Information on the availability of components qualified to this
24、detail specification is given in the IEC QC 001005. 9 1 General data 1.1 Recommended method(s) of mounting (to be inserted) (See IEC 60384-9, 1.4.2). 1.2 Dimensions Table 1 Case size reference and dimensions Dimensions (in mm) Case size reference L H d . . . . . . . When there is no case size refere
25、nce, Table 1 may be omitted and the dimensions shall be given in Table 2, which then becomes Table 1. The dimensions shall be given as maximum dimensions or as nominal dimensions with a tolerance. BS EN 60384-9-1:2005 5 EN 60384-9-1:2005 1.3 Ratings and characteristics Rated capacitance range (see T
26、able 2) Tolerance on rated capacitance Rated voltage Climatic category Rated temperature Tangent of loss angle Insulation resistance Temperature characteristic of capacitance Table 2 Values of capacitance and of voltage related to case sizes Rated voltage Case size Case size Case size Case size Rate
27、d capacitance (in pF and/or nF) Tolerance % Table 3 Temperature characteristic of capacitance Permissible capacitance variation Temperature range With no voltage applied With URapplied - C/ + C + % / % + % / % 1.4 Normative references The following referenced documents are indispensable for the appl
28、ication of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60384-9:200X, Fixed capacitors for use in electronic equipment. Part 9: Sectional specification: Fixed capacit
29、ors of ceramic dielectric, Class 2 IEC 60410:1973, Sampling plans and procedures for inspection by attributes 1.5 Marking The marking of the capacitor and the packing shall be in accordance with the requirements of IEC 60384-9, 1.6. The details of the marking of the component and packing shall be gi
30、ven in full in the detail specification. 1.6 Ordering information Orders for capacitors covered by this specification shall contain, in clear or in coded form, the following minimum information: a) rated capacitance; b) tolerance on rated capacitance; c) rated d.c. voltage; d) temperature characteri
31、stic of capacitance; e) number and issue reference of the detail specification and style reference. BS EN 60384-9-1:2005EN 60384-9-1:2005 6 1.7 Certified records of released lots Required/not required. 1.8 Additional information (not for inspection purposes) 1.9 Additional or increased severities or
32、 requirements to those specified in the generic and/or sectional specification NOTE Additions or increased requirements should be specified only when essential. Table 4 Other characteristics This table is to be used for defining characteristics which are additional to or more severe than those given
33、 in the sectional specification. 2 Inspection requirements 2.1 Procedures 2.1.1 For qualification approval, the procedures shall be in accordance with the sectional specification, IEC 60384-9, 3.4. 2.1.2 For quality conformance inspection the test schedule (Table 5) includes sampling, periodicity, s
34、everities and requirements. The formation of inspection lots is covered by 3.5.1 of the sectional specification IEC 60384-9. Table 5 Test schedule for qualification conformance inspection Number of specimens (n) and number of non-conforming items (c) bSubclause number and test aD or ND Conditions of
35、 test a IL n c Performance requirements aGroup A inspection (lot-by-lot) Subgroup A0 ND 100 % c4.3.1 Capacitance Frequency: kHz Measuring Voltage: V Within specified tolerance 4.3.2 Tangent of loss angle Frequency and measuring voltage same as in 4.3.1 As in 4.3.2.3 4.3.3 Insulation resistance (Test
36、 A) Method: As in 4.3.3.2 4.3.4 Voltage proof (Test A) Method: No breakdown or flashoverSubgroup A1 ND S-4 0 4.2 Visual examination dAs in 4.2 Legible marking and as specified in 1.5 of this specification Subgroup A2 ND S-3 0 4.2 Dimensions (gauging) edAs specified in Table 1 of this specification B
37、S EN 60384-9-1:2005 7 EN 60384-9-1:2005 Table 5 (continued) Subclause number and test aD or ND Conditions of test a Number of specimens (n) and number of non-conforming items (c) bPerformance requirements aIL n c Group B inspection (lot-by-lot) Subgroup B1 D 4.7 Solderability Method: . Good tinning
38、as evidenced by free flowing of the solder with wetting of the terminations or solder shall flow within . s, as applicable 4.16 Solvent resistance of the marking (if applicable) Solvent: . Solvent temperature: . Method 1 Rubbing material: cotton woolRecovery: S-3 d)0 Legible marking Subgroup B2 g)ND
39、 4.4 Temperature characteristic of capacitance Special preconditioning as in 4.1 Capacitance S-2 d)0 C/C as in 4.4.3 BS EN 60384-9-1:2005EN 60384-9-1:2005 8 Table 5 (continued) Subclause number and test aD or ND Conditions of test a Number of specimens (n) and number of non-conforming items (c) bPer
40、formance requirements ap n c Group C inspection (periodic) Subgroup C1A D Part of sample of subgroup C1 4.2 Dimensions (detail) As specified in Table 1 of this specification 4.5 Robustness of terminationsVisual examination No visible damage 4.6.2 Initial measurement Capacitance 4.6 Resistance to sol
41、dering heat Special preconditioning as in 4.1 Method: 4.6.4 Final measurements Visual examination Capacitance No visible damage Legible marking C/C as in 4.6.4 4.15 Component solvent resistance (if applicable) Solvent: . Solvent temperature: . Method 2 Recovery: 24 h 2 h 6 9 0 f)Subgroup C1B D Other
42、 part of sample of subgroup C1 4.8 Rapid change of temperature Special preconditioning as in 4.1 4.8.2 Initial measurement Capacitance TA= Lower category temperature TB= Upper category temperature Five cycles Duration t1= 30 min Recovery: 24 h 2 h Visual examination 6 18 0 f)No visible damage BS EN
43、60384-9-1:2005 9 EN 60384-9-1:2005 Table 5 (continued) Subclause number and test aD or ND Conditions of test a Number of specimens (n) and number of non-conforming items (c) bPerformance requirements ap n c 4.9 Vibration Method of mounting: see 1.1 of this specification Frequency range: . Hz to . Hz
44、 Amplitude 0,75 mm or acceleration 100 m/s2(whichever is the less severe) Total duration: 6 h 4.9.2 Intermediate inspection Visual examination No visible damage 4.10 Bump (or shock, see 4.11) Method of mounting: see 1.1 of this specification Acceleration: m/s2Duration of pulse: ms 4.11 Shock (or bum
45、p, see 4.10) Method of mounting: see 1.1 of this specification Acceleration: m/s2Duration of pulse: ms 4.10.3 Final measurementsor 4.11.3 Visual examination No visible damage Legible marking Capacitance C/C as in 4.11.3 Subgroup C1 D 6 27 0 f)Combined sample of specimens of subgroups C1A and C1B 4.1
46、2 Climatic sequence Special preconditioning as in 4.1 4.12.1.1 Initial measurement Capacitance 4.12.2 Dry heat Temperature: upper category temperature Duration: 16 h 4.12.3 Damp heat, cyclic, Test Db, first cycle 4.12.4 Cold Temperature: lower category temperature Duration: 2 h Visual examination No
47、 visible damage 4.12.5 Low air pressure(if required by the detail specification) Air pressure: 8 kPa 4.12.5.3 Intermediate inspection Visual examination No breakdown or flashover 4.12.6 Damp heat, cyclic, Test Db, remaining cycles Recovery: 24 h 2 h BS EN 60384-9-1:2005EN 60384-9-1:2005 10 Table 5 (
48、continued) Subclause number and test aD or ND Conditions of test a Number of specimens (n) and number of non-conforming items (c) bPerformance requirements ap n c 4.12.6.3 Final measurements Visual examination No visible damage Legible marking Capacitance C/C as in 4.12.6.3 Tangent of loss angle As
49、in 4.12.6.3 Insulation resistance As in 4.12.6.3 Subgroup C2 D 6 15 0 f)4.13 Damp heat, steady state Special preconditioning as in 4.1 4.13.2 Initial measurements Capacitance Recovery: 24 h 2 h 4.13.5 Final measurements Visual examination No visible damage Legible marking Capacitance C/C as in 4.13.5 Tangent of loss angle As in 4.13.5 Insulation resistance As in 4.13.5 Subgroup C3 D 3 21 4.14 Endurance
