1、BSI Standards PublicationLampholders for tubularfluorescent lamps andstarterholdersBS EN 60400:2008+A1:2011BS EN 60400:2008+A2:2014BS EN 60400:2008+A2:2014 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 60400:2008+A2:2014. It is identical to IEC 60400:2008, inc
2、orporating amendments 1:2011 and 2:2014. It supersedes BS EN 60400:2008+A1:2011, which is withdrawn.The start and finish of text introduced or altered by amendment is indicated in the text by tags. Tags indicating changes to IEC text carry the number of the IEC amendment. For example, text altered b
3、y IEC amendment 1 is indicated by .The UK participation in its preparation was entrusted by Technical Committee CPL/34, Lamps and Related Equipment, to Subcommittee CPL/34/2, Lamp caps and holders.A list of organizations represented on this subcommittee can be obtained on request to its secretary.Th
4、is publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2014. Published by BSI Standards Limited 2014ISBN 978 0 580 83346 5ICS 29.140.10Compliance with a British Standard cannot confer
5、 immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 1 March 2009.Amendments/corrigenda issued since publicationDate Text affected31 August 2011 Implementation of IEC amendment 1:2011 with CENELEC endorsement A1:20
6、11.31 October 2014 Implementation of IEC amendment 2:2014 with CENELEC endorsement A2:2014.EUROPEAN STANDARD EN 60400:2008+A1 NORME EUROPENNE EUROPISCHE NORM May 2011 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee f
7、r Elektrotechnische Normung Central Secretariat: rue de Stassart 35, B - 1050 Brussels 2008 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 60400:2008 E ICS 29.140.10 Supersedes EN 60400:2000 + A1:2002 + A2:2004English version Lam
8、pholders for tubular fluorescent lamps and starterholders (IEC 60400:2008) Douilles pour lampes tubulaires fluorescence et douilles pour starters (CEI 60400:2008) Lampenfassungen fr rhrenfrmige Leuchtstofflampen und Starterfassungen (IEC 60400:2008) This European Standard was approved by CENELEC on
9、2008-08-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may
10、be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to t
11、he Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxemb
12、ourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. EN 60400:2008+A2September 2014Foreword The text of document 34B/1383/FDIS, future edition 7 of IEC 60400, prepared by SC 34B, Lamp caps and holders, of IEC TC 34, L
13、amps and related equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 60400 on 2008-08-01. This European Standard supersedes EN 60400:2000 + A1:2002 + A1:2002/corrigendum July 2003 + A2:2004. In EN 60400:2008, information on lampholders intended to be used in a
14、pplications where they are accessible in normal use (class II luminaires as well as class I luminaries) has been introduced, as well as requirements for contact-making to pins for single-capped fluorescent lamps, introduction of new fits in the text and Annex A, and requirements for shade holder rin
15、gs have been adopted. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2009-05-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow)
16、 2011-08-01 In this standard, the following print types are used: requirements proper: in roman type; test specifications: in italic type; notes: in smaller roman type. Annex ZA has been added by CENELEC. _ Endorsement notice The text of the International Standard IEC 60400:2008 was approved by CENE
17、LEC as a European Standard without any modification. In the official version, for Bibliography, the following note has to be added for the standard indicated: IEC 60061-4 NOTE Harmonized as EN 60061-4:1992 (modified). _ Foreword to amendment A1 The text of document 34B/1591/FDIS, future amendment 1
18、to IEC 60400:2008, prepared by SC 34B, Lamp caps and holders, of IEC TC 34, Lamps and related equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as amendment A1 to EN 60400:2008 on 2011-05-25. Attention is drawn to the possibility that some of the elements of this
19、document may be the subject of patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent rights. The following dates were fixed: latest date by which the amendment has to be implemented at national level by publication of an identical national standard or by
20、 endorsement (dop) 2012-02-25 latest date by which the national standards conflicting with the amendment have to be withdrawn (dow) 2014-05-25 _ Endorsement notice The text of amendment 1:2011 to the International Standard IEC 60400:2008 was approved by CENELEC as an amendment to the European Standa
21、rd without any modification. _ BS EN 60400:2008+A1:2011EN 60400:2008+A1:2011 (E) - 2 - 2 BS EN 60400:2008+A2:2014EN 60400:2008+A2:2014 (E) EN 60400:2008/A2:2014 - 2 - Foreword The text of document 34B/1730/FDIS, future IEC 60400:2008/A2, prepared by SC 34B, Lamp caps and holders, of IEC TC 34, Lamps
22、 and related equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 60400:2008/A2:2014. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and CENELEC shall not be held responsible for identif
23、ying any or all such patent rights. This standard covers the Principle Elements of the Safety Objectives for Electrical Equipment Designed for Use within Certain Voltage Limits (LVD - 2006/95/EC). The following dates were fixed: latest date by which the amendment has to be implemented at national le
24、vel by publication of an identical national standard or by endorsement (dop) 2015-05-04 latest date by which the national standards conflicting with the amendment have to be withdrawn (dow) 2017-08-04 Endorsement notice The text of the International Standard IEC 60400:2008/A2:2014 was approved by CE
25、NELEC as a European Standard without any modification. 3 BS EN 60400:2008+A2:2014EN 60400:2008+A2:2014 (E)EN 60400:2008/A2:2014 - 2 - Foreword The text of document 34B/1730/FDIS, future IEC 60400:2008/A2, prepared by SC 34B, Lamp caps and holders, of IEC TC 34, Lamps and related equipment, was submi
26、tted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 60400:2008/A2:2014. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent right
27、s. This standard covers the Principle Elements of the Safety Objectives for Electrical Equipment Designed for Use within Certain Voltage Limits (LVD - 2006/95/EC). The following dates were fixed: latest date by which the amendment has to be implemented at national level by publication of an identica
28、l national standard or by endorsement (dop) 2015-05-04 latest date by which the national standards conflicting with the amendment have to be withdrawn (dow) 2017-08-04 Endorsement notice The text of the International Standard IEC 60400:2008/A2:2014 was approved by CENELEC as a European Standard with
29、out any modification. Foreword to amendment A2Annex ZA (normative) Normative eferences to international publications with their corresponding European publications The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited
30、applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 60061-1 (mod) - 1
31、)Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps EN 60061-1 1993 2)IEC 60061-2 (mod) - 1)Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders EN 60061-2 1993 2)IEC 60061-3 (mo
32、d) - 1)Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges EN 60061-3 1993 2)IEC 60068-2-20 1979 Environmental testing - Part 2-20: Tests - Test T: Soldering HD 323.2.20 S3 3) 1988 IEC 60068-2-75 1997 Environmental testing - Part 2-75: Tests -
33、 Test Eh: Hammer tests EN 60068-2-75 1997 IEC 60081 - 1)Double-capped fluorescent lamps - Performance specifications EN 60081 1998 2)IEC 60112 2003 Method for the determination of the proof and the comparative tracking indices of solid insulating materials EN 60112 2003 IEC 60155 - 1)Glow-starters f
34、or fluorescent lamps EN 60155 1995 2)IEC 60238 - 1)Edison screw lampholders EN 60238 + corr. January 2004 2)2005 IEC 60352-1 1997 Solderless connections - Part 1: Wrapped connections - General requirements, test methods and practical guidance EN 60352-1 1997 IEC 60399 - 1)Barrel thread for lampholde
35、rs with shade holder ring EN 60399 2004 2)IEC 60529 A1 1989 1999 Degrees of protection provided by enclosures (IP Code) EN 60529 + corr. May A1 1991 1993 2000 1)Undated reference. 2)Valid edition at date of issue. 3) HD 323.2.20 S3 includes A2:1987 to IEC 60068-2-20:1979. It is superseded by EN 6006
36、8-2-20:2008, which is based on IEC 60068-2-20:2008. BS EN 60400:2008+A1:2011EN 60400:2008+A1:2011 (E)- 3 - 4 BS EN 60400:2008+A2:2014EN 60400:2008+A2:2014 (E)Publication Title EN/HD Year IEC 60598-1 (mod) - 1)Luminaires - Part 1: General requirements and tests EN 60598-1 200X 4)IEC 60664-1 2007 Insu
37、lation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests EN 60664-1 2007 IEC 60695-2-11 2000 Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-wire flammability test method for end-products EN 60695-2-11 2001 IEC 60695-11-5 2
38、004 Fire hazard testing - Part 11-5: Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance EN 60695-11-5 2005 IEC 61199 - 1)Single-capped fluorescent lamps - Safety specifications EN 61199 1999 2)ISO 4046-4 2002 Paper, board, pulps and related terms - Vocabul
39、ary - Part 4: Paper and board grades and converted products - - 4)To be ratified. BS EN 60400:2008+A1:2011EN 60400:2008+A1:2011 (E) - 4 - 5 BS EN 60400:2008+A2:2014EN 60400:2008+A2:2014 (E)This page deliberately left blankCONTENTS 1 General 7 1.1 Scope7 1.2 Normative references 7 2 Terms and definit
40、ions .8 3 General requirement. 11 4 General conditions for tests 11 5 Electrical rating.13 6 Classification 13 7 Marking 14 8 Protection against electric shock.16 9 Terminals .17 10 Construction .19 11 Resistance to dust and moisture .24 12 Insulation resistance and electric strength.25 13 Endurance
41、 26 14 Mechanical strength27 15 Screws, current-carrying parts and connections 28 16 Creepage distances and clearances 31 17 Resistance to heat, fire and tracking .32 18 Resistance to excessive residual stresses (season cracking) and to rusting 37 Annex A (normative) Examples of lampholders covered
42、by this standard 83 Annex B (normative) Season cracking/corrosion test 84 Annex C (informative) Protection against electric shock Explanatory details for the installation of lampholders according to 8.2 .86 Bibliography87 Figure 1 Mounting jig for the testing of lampholders 38 Figure 2 Mounting shee
43、t.39 Figure 3 Fixture for the testing of lampholder flexibility 40 Figure 4 Test caps G5, GX5 and G13 . 41 Figure 5 Impact test apparatus .42 Figure 5a Mounting support43 Figure 6 Test cap for the test of Clause 13 for lampholders 2GX13.44 Figure 7 Ball-pressure apparatus45 Figure 8 Bracket for fixi
44、ng lampholders for the impact test 45 Figure 9 Test caps and test assembly for testing of resistance to heat of lampholders G13 with T marking (see 17.1) 46 Dimensions in millimetres46 Figure 9a Test cap and test assembly for testing of resistance to heat of lampholders G5 and GX5 with T marking (se
45、e 17.1) 47 Figure 10 Dimensions of starterholder 48 BS EN 60400:2008+A1:2011EN 60400:2008+A1:2011 (E)- 5 -Figure 10a Dimensions of holder intended for accepting only starters according to Annex B of IEC 60155.49 BS EN 60400:2008+A2:2014IEC 60400:2008+A2:2014 7 999101313151516181921262728293033343985
46、8688894041424344454647474848495051Figure 11 “Go“ plug gauges for starterholders.50 Figure 12 Plug gauge for starterholders for testing contact making and retention 51 Figure 13 Special plug gauge for starterholders for testing contact making52 Figure 14 Test cap for the test of Clause 13 for lamphol
47、ders G5 .52 Figure 15 Test cap for the test of Clause 13 for lampholders G13 .53 Figure 16 Test cap for the test of Clause 13 for lampholders 2G13 .54 Figure 17 Test cap for the test of Clause 13 for lampholders G20 .54 Figure 18 Test cap for the test of Clause 13 for lampholders Fa654 Figure 19 Tes
48、t cap for the test of Clause 13 for lampholders G10q, GU10q and GZ10q.55 Figure 20 Test cap for the test of Clause 13 for lampholders Fa855 Figure 21 Test starter for the test of Clause 13 .56 Figure 22 Test cap for the test of Clause 13 for lampholders R17d .57 Figure 23 Test cap for the test of Cl
49、ause 13 for lampholders 2G11 .58 Figure 24 Test cap for the test of Clause 13 for lampholders G23 and GX23.59 Figure 25 Test cap for the test of Clause 13 for lampholders GR8.60 Figure 26 Test cap for the test of Clause 13 for lampholders GR10q.60 Figure 27 Test cap for the test of Clause 13 for lampholders GX10q and GY10q.61 Figure 28 Test cap for the test of Clause 13 for lampholders G24, GX24 and GY24 62 Figure 29 Test cap for the test of C
