1、BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06LuminairesPart 2: Particular requirements Section 4: Portable general purpose luminairesBS EN 60598-2-4:2018EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 60598-2-4 March 2018 ICS 29.140.40 Supersedes EN 60598-2-4
2、:1997, EN 60598-2-7:1989 English Version Luminaires - Part 2: Particular requirements - Section 4: Portable general purpose luminaires (IEC 60598-2-4:2017 , modified) Luminaires - Partie 2: Exigences particulires - Section 4: Luminaires portatifs usage gnral (IEC 60598-2-4:2017 , modifie) Leuchten -
3、 Teil 2: Besondere Anforderungen - Hauptabschnitt 4: Ortsvernderliche Leuchten fr allgemeine Zwecke (IEC 60598-2-4:2017 , modifiziert) This European Standard was approved by CENELEC on 2017-05-26. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the condi
4、tions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard ex
5、ists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the na
6、tional electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, P
7、ortugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Rue de la S
8、cience 23, B-1040 Brussels 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 60598-2-4:2018 E National forewordThis British Standard is the UK implementation of EN 60598-2-4:2018. It is derived from IEC 60598-2-4:2017. It superse
9、des BS EN 60598-2-7:1997 and BS EN 60598-2-4:1998, which will be withdrawn on 30 March 2021.The CENELEC common modifications have been implemented at the appropriate places in the text. The start and finish of each common modification is indicated in the text by tags .The UK participation in its pre
10、paration was entrusted to Technical Committee CPL/34/4, Luminaires.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct applicat
11、ion. The British Standards Institution 2018 Published by BSI Standards Limited 2018ISBN 978 0 580 86962 4ICS 29.140.40Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committe
12、e on 31 May 2018.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 60598-2-4:2018EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 60598-2-4 March 2018 ICS 29.140.40 Supersedes EN 60598-2-4:1997, EN 60598-2-7:1989 English Version Luminaires - Part 2: Particular
13、 requirements - Section 4: Portable general purpose luminaires (IEC 60598-2-4:2017 , modified) Luminaires - Partie 2: Exigences particulires - Section 4: Luminaires portatifs usage gnral (IEC 60598-2-4:2017 , modifie) Leuchten - Teil 2: Besondere Anforderungen - Hauptabschnitt 4: Ortsvernderliche Le
14、uchten fr allgemeine Zwecke (IEC 60598-2-4:2017 , modifiziert) This European Standard was approved by CENELEC on 2017-05-26. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standar
15、d without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in
16、any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croati
17、a, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland
18、, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels 2018 CENELEC All rights of exploitation in an
19、y form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 60598-2-4:2018 E BS EN 60598-2-4:2018EN 60598-2-4:2018 (E) 2 European foreword The text of document 34D/1190/CDV, future edition 3 of IEC 60598-2-4, prepared by IEC/SC 34D “Luminaires“ of IEC/TC 34 “Lamps and related equipme
20、nt“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 60598-2-4:2018. A draft amendment, which covers common modifications to IEC 60598-2-4 (34D/1190/CDV), was prepared by CLC/TC 34Z “Luminaires and associated equipment“ and approved by CENELEC. The following dates are fix
21、ed: latest date by which this document has to be implementedat national level by publication of an identicalnational standard or by endorsement(dop) 2018-09-30 latest date by which the national standards conflicting withthis document have to be withdrawn(dow) 2021-03-30 EN 60598-2-4:2018 supersedes
22、EN 60598-2-4:1997 and EN 60598-2-7:1989. Clauses, subclauses, notes, tables, figures and annexes which are additional to those in IEC 60598-2-4:2017 are prefixed “Z”. This document is to be read in conjunction with EN 60598-1:2015. This document has been prepared under a mandate given to CENELEC by
23、the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For the relationship with EU Directive(s) see informative Annex ZZ, which is an integral part of this document. Endorsement notice The text of the International Standard IEC 60598
24、-2-4:2017 was approved by CENELEC as a European Standard with agreed common modifications. BS EN 60598-2-4:2018EN 60598-2-4:2018 (E) 4 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part,
25、are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When an International Publication has been mod
26、ified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 61032 1997 Protection of persons and equipment b
27、y enclosures - Probes for verification EN 61032 1998 IEC 60598-1 + A1 2014 2017 Luminaires - Part 1: General requirements and tests EN 60598-1 + A1 2015 (mod) 2018 BS EN 60598-2-4:2018EN 60598-2-4:2018 (E) 5 Annex ZB (informative) Special National Conditions Special national condition: National char
28、acteristic or practice that cannot be changed even over a long period, e.g. climatic conditions, electrical earthing conditions. NOTE If it affects harmonization, it forms part of the European Standard. For the countries in which the relevant special national conditions apply these provisions are no
29、rmative, for other countries they are informative. Clause Special national condition 4.4.4 Denmark In Denmark, luminaires for outdoor use shall be classified as class II or class III. BS EN 60598-2-4:2018EN 60598-2-4:2018 (E) 6 Annex ZZ (informative) Relationship between this European standard and t
30、he safety objectives of Directive 2014/35/EU 2014 OJ L96 aimed to be covered This European standard has been prepared under a Commissions standardisation request relating to harmonised standards in the field of the Low Voltage Directive, M/511, to provide one voluntary means of conforming to safety
31、objectives of Directive 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain voltage limits 2014 OJ L96. Once this stan
32、dard is cited in the Official Journal of the European Union under that Directive, compliance with the normative clauses of this standard given in Table ZZ.1 confers, within the limits of the scope of this standard, a presumption of conformity with the corresponding safety objectives of that Directiv
33、e, and associated EFTA regulations. Table ZZ.1 Correspondence between this European standard and Annex I of Directive 2014/35/EU 2014 OJ L96 Safety objectives of Directive 2014/35/EU Clause(s) / sub-clause(s) of this EN Remarks / Notes 1. General conditionsa) the essential characteristics,the recogn
34、ition and observance of which will ensure that electrical equipment will be used safely and in applications for which it was made, shall be marked on the electrical equipment, or, if this is not possible, on an accompanying document; 4.6 b) the electrical equipment,together with its component parts,
35、 shall be made in such a way as to ensure that it can be safely and properly assembled and connected; All c) the electrical equipment shallbe so designed and manufactured as to ensure that protection against the hazards set out in points 2 and 3 is assured, providing that the equipment is used in ap
36、plications for which it was made and is adequately maintained. See item 2 and 3 of this table BS EN 60598-2-4:2018EN 60598-2-4:2018 (E) 7 2. Protection against hazardsarising from the electrical equipment Measures of a technical nature shall be laid down in accordance with point 1, in order to ensur
37、e that: a) persons and domestic animalsare adequately protected against the danger of physical injury or other harm which might be caused by direct or indirect contact; 4.7 4.8 4.9 4.10 4.11 4.12 4.15 b) temperatures, arcs or radiationwhich would cause a danger, are not produced; 4.7 4.8 4.13 4.15 E
38、MF is not covered c) persons, domestic animals andproperty are adequately protected against non-electrical dangers caused by the electrical equipment which are revealed by experience; 4.7 4.15 4.8 d) the insulation is suitable forforeseeable conditions. 4.8 4.14 4.15 3. Protection against hazardswhi
39、ch may be caused by external influences on the electrical equipment Technical measures shall be laid down in accordance with point 1, in order to ensure that the electrical equipment: a) meets the expectedmechanical requirements in such a way that persons, domestic animals and property are not endan
40、gered; 4.6 4.7 b) is resistant to non-mechanicalinfluences in expected environmental conditions, in such a way that persons, domestic animals and property are not endangered; 4.14 4.16 c) does not endanger persons,domestic animals and property in foreseeable conditions of overload. 4.7 4.13 4.16 BS
41、EN 60598-2-4:2018EN 60598-2-4:2018 (E) 8 WARNING 1: Presumption of conformity stays valid only as long as a reference to this European standard is maintained in the list published in the Official Journal of the European Union. Users of this standard should consult frequently the latest list publishe
42、d in the Official Journal of the European Union. WARNING 2: Other Union legislation may be applicable to the product(s) falling within the scope of this standard. BS EN 60598-2-4:2018This page deliberately left blank 2 IEC 60598-2-4:2017 IEC 2017 CONTENTS FOREWORD . 3 4.1 Scope 5 4.2 Normative refer
43、ences . 5 4.3 Terms and definitions 5 4.4 General test requirements . 5 4.5 Classification of luminaires 5 4.6 Marking . 6 4.7 Construction 6 4.8 Creepage distances and clearances 8 4.9 Provision for earthing . 8 4.10 Terminals. 8 4.11 External and internal wiring 8 4.12 Protection against electric
44、shock 8 4.13 Endurance tests and thermal tests . 9 4.14 Resistance to dust and moisture 9 4.15 Insulation resistance and electric strength . 9 4.16 Resistance to heat, fire and tracking 9 Bibliography 10 Figure 1 Luminaires “For indoor use only” 6 2 IEC 60598-2-4:2017 IEC 2017 CONTENTS FOREWORD . 3
45、4.1 Scope 5 4.2 Normative references . 5 4.3 Terms and definitions 5 4.4 General test requirements . 5 4.5 Classification of luminaires 5 4.6 Marking . 6 4.7 Construction 6 4.8 Creepage distances and clearances 8 4.9 Provision for earthing . 8 4.10 Terminals. 8 4.11 External and internal wiring 8 4.
46、12 Protection against electric shock 8 4.13 Endurance tests and thermal tests . 9 4.14 Resistance to dust and moisture 9 4.15 Insulation resistance and electric strength . 9 4.16 Resistance to heat, fire and tracking 9 Bibliography 10 Figure 1 Luminaires “For indoor use only” 6 BS EN 60598-2-4:2018I
47、EC 60598-2-4:2017 IEC 2017 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ LUMINAIRES Part 2-4: Particular requirements Portable general purpose luminaires FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotec
48、hnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specification
49、s, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in a
