1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationElectric and optical fibre cables Test methods for non-metallic materialsPart 604: Physical tests Measurement of absence of corrosive components in filling compoundsBS EN 60811-6
2、04:2012National forewordThis British Standard is the UK implementation of EN 60811-604:2012. It isidentical to IEC 60811-604:2012.In the UK, the relationship between the supersessions of BS EN 60811 seriescan be summarized as follows.Superseded standards are withdrawnThe UK participation in its prep
3、aration was entrusted by Technical CommitteeGEL/20, Electric cables, to Subcommittee GEL/20/17, Electric Cables - Lowvoltage.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions of a
4、contract. Users are responsible for its correct application. The British Standards Institution 2012Published by BSI Standards Limited 2012ISBN 978 0 580 65341 4ICS 29.035.01; 29.060.20Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published
5、under the authority of the StandardsPolicy and Strategy Committee on 31 July 2012.Amendments issued since publicationAmd. No. Date Text affectedBRITISH STANDARDBS EN 60811-604:2012BS EN 60811-100 together with Supersedes - -201, -202, -203, -501 BS EN 60811-1-1:1995 -301, -302, -411, -601, -602, -60
6、3, -604 BS EN 60811-5-1:2000 -401, -412 BS EN 60811-1-2:1995 -402, -502, -503, -606 BS EN 60811-1-3:1995 -403, -404, -507 BS EN 60811-2-1:1998 -405, -409 BS EN 60811-3-2:1995 -406, -511, -605, -607 BS EN 60811-4-1:2004 -407, -408, -410, -510, -512, -513 BS EN 60811-4-2:2004 -504, -505, -506 BS EN 60
7、811-1-4:1995 -508, -509 BS EN 60811-3-1:1995EUROPEAN STANDARD EN 60811-604 NORME EUROPENNE EUROPISCHE NORM June 2012 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Management Centre: Ave
8、nue Marnix 17, B - 1000 Brussels 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 60811-604:2012 E ICS 29.035.01; 29.060.20 Supersedes EN 60811-5-1:1999 (partially) + A1:2004 (partially)English version Electric and optical fib
9、re cables - Test methods for non-metallic materials - Part 604: Physical tests - Measurement of absence of corrosive components in filling compounds (IEC 60811-604:2012) Cbles lectriques et fibres optiques - Mthodes dessai pour les matriaux non-mtalliques - Partie 604: Essais physiques - Mesure de l
10、absence de composants corrosifs dans les matires de remplissage (CEI 60811-604:2012) Kabel, isolierte Leitungen und Glasfaserkabel - Prfverfahren fr nichtmetallene Werkstoffe - Teil 604: Physikalische Prfungen - Messung des Nichtvorhandenseins von korrosiven Bestandteilen in Fllmassen (IEC 60811-604
11、:2012) This European Standard was approved by CENELEC on 2012-04-17. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliogra
12、phical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the respons
13、ibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland
14、, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. EN 60811-604:2012 - 2 - Foreword The text of document 20/1313/FDIS, fu
15、ture edition 1 of IEC 60811-604, prepared by IEC/TC 20 “Electric cables“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 60811-604:2012. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identica
16、l national standard or by endorsement (dop) 2013-01-17 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2015-04-17 This document supersedes Clause 8 of EN 60811-5-1:1999 + A1:2004 (partially). Full details of the replacements are shown in Annex A o
17、f EN 60811-100:2012. There are no technical changes with respect to EN 60811-5-1:1999 + A1:2004, but see the Foreword to EN 60811-100:2012. This standard is to be read in conjunction with EN 60811-100. Attention is drawn to the possibility that some of the elements of this document may be the subjec
18、t of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. This standard covers the Principle Elements of the Safety Objectives for Electrical Equipment Designed for Use within Certain Voltage Limits (LVD - 2006/95/EC) Endorsement notice The t
19、ext of the International Standard IEC 60811-604:2012 was approved by CENELEC as a European Standard without any modification. BS EN 60811-604:2012- 3 - EN 60811-604:2012 Annex ZA (normative) Normative references to international publications with their corresponding European publications The followi
20、ng documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE When an inter
21、national publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 60811-100 2012 Electric and optical fibre cables - Test methods for non-metallic materials - Part 100: General EN 60811-100 2012 BS EN 60811-604:2012
22、2 60811-604 IEC:2012 CONTENTS INTRODUCTION . 5 1 Scope . 6 2 Normative references . 6 3 Terms and definitions . 6 4 Test method . 6 4.1 General . 6 4.2 Apparatus 6 4.3 Test procedure 6 4.4 Expression of results . 7 5 Test report 7 Bibliography 8 BS EN 60811-604:201260811-604 IEC:2012 5 INTRODUCTION
23、The IEC 60811 series specifies the test methods to be used for testing non-metallic materials of all types of cables. These test methods are intended to be referenced in standards for cable construction and for cable materials. NOTE 1 Non-metallic materials are typically used for insulating, sheathi
24、ng, bedding, filling or taping within cables. NOTE 2 These test methods are accepted as basic and fundamental and have been developed and used over many years principally for the materials in all energy cables. They have also been widely accepted and used for other cables, in particular optical fibr
25、e cables, communication and control cables and cables for ships and offshore applications. BS EN 60811-604:2012 6 60811-604 IEC:2012 ELECTRIC AND OPTICAL FIBRE CABLES TEST METHODS FOR NON-METALLIC MATERIALS Part 604: Physical tests Measurement of absence of corrosive components in filling compounds
26、1 Scope This Part 604 of IEC 60811 indicates the effect of the filling compound when in contact with the metallic parts of the cable. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated
27、references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60811-100:2012, Electric and optical fibre cables Test methods for non-metallic materials Part 100: General 3 Terms and definitions For the purpos
28、e of this document, the terms and definitions given in IEC 60811-100 apply. 4 Test method 4.1 General This part of IEC 60811 shall be used in conjunction with IEC 60811-100. Unless otherwise specified, tests shall be carried out at room temperature. This test indicates the effect of the filling comp
29、ound in contact with the metallic parts of the cable. 4.2 Apparatus The apparatus comprises: a) A sheet of aluminium strip not less than 0,5 mm thick and of a purity of at least 99,5 %. The sheet shall be cut into pieces 50 mm long and 20 mm wide. b) A sheet of commercial cold rolled copper strip no
30、t less than 0,5 mm thick, cut into pieces 50 mm long and 20 mm wide. NOTE The three grades of copper in common use: toughpitch, high-conductivity copper, phosphorized, deoxidized copper, and oxygen-free, high-conductivity copper, give comparable results. 4.3 Test procedure Polish each strip on its t
31、wo faces to obtain a uniform finish free from defects. Wash each strip with diethyl ether and allow it to dry. Use clean forceps for all further handling of the strips. BS EN 60811-604:201260811-604 IEC:2012 7 Approximately 120 g of the filling compound shall be preheated at (80 2) C in a tall glass
32、 beaker of at least 200 ml capacity. The freshly prepared metal strips, one of aluminium and the other of copper, shall be fully immersed in the compound without touching each other or the sides of the beaker. The beaker shall then be stored for 14 days in an oven at a temperature of (80 2) C. When
33、the specified period of time has elapsed, remove the beaker from the oven and allow it to cool to room temperature. Withdraw the metallic strips, wipe the surplus compound from them and wash them first with petroleum spirit and then with diethyl ether. 4.4 Expression of results Examine the surface c
34、ondition of the strips with normal or corrected vision without magnification to ensure no etching, pitting or discolouration. The metal strips shall show no corrosion. 5 Test report The test report shall be in accordance with that given in IEC 60811-100. BS EN 60811-604:2012 8 60811-604 IEC:2012 Bib
35、liography IEC 60811-5-1:1990, Common test methods for insulating and sheathing materials of electric cables Part 5: Methods specific to filling compounds Section One Drop-point Separation of oil Lower temperature brittleness Total acid number Absence of corrosive components Permittivity at 23 C DC r
36、esistivity at 23 C and 100 C (withdrawn) _ BS EN 60811-604:2012This page deliberately left blankBSI is the independent national body responsible for preparing British Standards and other standards-related publications, information and services. It presents the UK view on standards in Europe and at t
37、he international level. BSI is incorporated by Royal Charter. British Standards and other standardisation products are published by BSI Standards Limited.British Standards Institution (BSI)raising standards worldwideBSI389 Chiswick High Road London W4 4AL UKTel +44 (0)20 8996 9001Fax +44 (0)20 8996
38、 Standards and PASs are periodically updated by amendment or revision. Users of British Standards and PASs should make sure that they possess the latest amendments or editions.It is the constant aim of BSI to improve the quality of our products and services. We would be grateful if anyone finding an
39、 inaccuracy or ambiguity while using British Standards would inform the Secretary of the technical committee responsible, the identity of which can be found on the inside frontcover. Similary for PASs, please notify BSI Customer Services.Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001BSI offers BS
40、I Subscribing Members an individual updating service called PLUS which ensures that subscribers automatically receive the latest editions of British Standards and PASs.Tel: +44 (0)20 8996 7669 Fax: +44 (0)20 8996 7001Email: Buying standardsYou may buy PDF and hard copy versions of standards directly
41、 using acredit card from the BSI Shop on the website addition all orders for BSI, international and foreign standards publicationscan be addressed to BSI Customer Services.Tel: +44 (0)20 8996 9001 Fax: +44 (0)20 8996 7001Email: In response to orders for international standards, BSI will supply the
42、British Standard implementation of the relevant international standard, unless otherwise requested.Information on standardsBSI provides a wide range of information on national, Europeanand international standards through its Knowledge Centre.Tel: +44 (0)20 8996 7004 Fax: +44 (0)20 8996 7005Email: BS
43、I Subscribing Members are kept up to date with standards developments and receive substantial discounts on the purchase priceof standards. For details of these and other benefits contact Membership Administration. Tel: +44 (0)20 8996 7002 Fax: +44 (0)20 8996 7001 Email: Information regarding online
44、 access to British Standards and PASs via British Standards Online can be found at information about British Standards is available on the BSI website at www.bsi- the data, software and documentation set out in all British Standards and other BSI publications are the property of and copyrighted by
45、BSI, or some person or entity that own copyright in the information used (such as the international standardisation bodies) has formally licensed such information to BSI for commerical publication and use. Except as permitted under the Copyright, Designs and Patents Act 1988 no extract may be reprod
46、uced, stored in a retrieval system or transmitted in any form or by any means electronic, photocopying, recording or otherwise without prior written permission from BSI. This does not preclude the free use, in the course of implementing the standard, of necessary details such as symbols, and size, type or grade designations. If these details are to be used for any other purpose than implementation then the prior written permission of BSI must be obtained. Details and advice can be obtained from the Copyright & Licensing Department.Tel: +44 (0)20 8996 7070Email:
