1、BRITISH STANDARD Telecontrol equipment and systems - Part 6-701: Telecontrol protocols compatible with IS0 standards and ITU-T recommendations - Functional profile for providing the TASE.l application service in end systems The European Standard EN 608706701: 1998 has the status of a British Standar
2、d ICs 33.200 BS EN 60870-6-70k1998 IEC 60870-6-701:1998 NO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHl LAW STD-BSI BS EN b0870-b-701-ENGL 1778 lsS Lb24bb7 074b545 193 = direction of the Electrotechnical Sector Committee, was published under the authority of the Standards Committe
3、e and comes into effect on 15 December 1998 hd. No. BS EN 60870-6-701:1998 Date Text affected National foreword This British Standard is the English language version of EN 60870 - present to the responsible international/European committee any enquiries on the interpretation, or proposals for change
4、, and keep the UK interests informed; - monitor related international and European developments and promulgate them in the UK. A list of organizations represented on this committee can be obtained on request to its secretary. From 1 January 1997, all IEC publications have the number 60000 added to t
5、he old number. For instance, IEC 27-1 has been renumbered as IEC 60027-1. For a period of time during the change over from one numbering system to the other, publications may contain identifierc fi-om both systems. Cross-references Attention is drawn to the fact that CEN and CENELEC standards nody i
6、nclude an annex which lists normative references to international publications with their corresponding European publications. The British Struidards which implement international or European publications referred to in this document may be found in the BSI Standards Catalogue under the section enti
7、tled ?International Standards Correspondence Index?, or by using the ?Find? facility of the BSI Standards Electronic Catalogue. A British Standard does not purport to include all the necessary provisions of a contract. Users of British Standards are responsible for their correct application. Complia
8、nce with a British Standard does not of itself confer immunity from legal obligations. Summary of pages This document comprises a front cover, an inside front cover, the EN title page, pages 2 to 21 and a back cover. O BSI 1998 ISBN O 680 30896 O STD.BS1 BS EN b0870-b-701-ENGL 1998 I Lb24bb 074b54b
9、UZT EUROPEAN STANDARD EN 60870-6-70 1 NORME EUROPENNE EUROPISCHE NORM October 1998 ICs 33.200 Descriptors: Open systems interconnection, telecontrol, application service element, functional profile, end system English version Teiecontrol equipment and systems Part 6-701 : Telecontrol protocols compa
10、tible with IS0 standards and ITU-T recommendations Functional profile for providing the TASE. 1 application service in end systems (IEC 60870-6-701 :1998) Matriels et systmes de tlconduite Partie 6-701 : Protocoles de tlconduite compatibles avec les normes IS0 et les recommandations de IUIT-T kompat
11、ibel sind Profils fonctionnels pour fournir le service dapplication TASE. 1 dans des Fernwirkeinrichtungen und -Systeme Teil 6-701 : Fernwirkprotokolle, die mit ISO-Normen und ITU-T-Empfehlungen Funktionsprofil fr den TASE. 1 - Anwendungsdienst in Endsystemen systmes terminaux (CE1 60870-6-70 1 : 1
12、998) (IEC 60870-6-701 : 1998) This European Standard was approved by CENELEC on 1998-1 0-01. CENELEC members are bound to comply with the CENKENELEC Internai Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-d
13、ate lists and bibliographical references concerning such national standards may be obtained on application to the Centrai Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation unde
14、r the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Czech Republic, Denmark, Finland, France, Germany, Greece, Iceland, I
15、reland, Italy, Luxembourg, Netherlands, Norway, Portugal, Spain, Sweden, Swiaeriand and United Kingdom. CENELEC European Committee for Electrotechnicai Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: rue de Stassar
16、t 35, B - 1050 Brussels 1998 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 60870-6-701:1998 E STD-BSI BS EN b0870-b-70L-ENGL 1798 M lb2Libb7 074b547 Tbb W Page 2 EN 60870-6-701:1998 Foreword The text of document 57/357/FDIS, fut
17、ure edition 1 of IEC 60870-6-701, prepared by IEC TC 57, Power system control and associated communications, was submitted to the IEC- CENELEC parallel vote and was approved by CENELEC as EN 60870-6-701 on 1998-1 0-01. The following dates were fixed: - latest date by which the EN has to be implement
18、ed at national level by publication of an identical national standard or by endorsement (dp) 1999-07-01 - latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2001 -07-01 Annexes designated “normative“ are part of the body of the standard. Annexes designated
19、 “informative“ are given for information only. In this standard, annexes A and ZA are normative and annex B is informative. Annex ZA has been added by CENELEC. Endorsement notice The text of the International Standard IEC 60870-6-701 :1998 was approved by CENELEC as a European Standard without any m
20、odification. In the official version, for annex B, Bibliography, the following note has to be added for the standard indicated: IEC 60870-6-501 NOTE: Harmonized as EN 60870-6-501 :1990(not modified). STD-BSI BS EN b0870-b-701-ENGL 1778 lb24bb7 074b548 7T2 Page 3 EN 60870-6-701:1998 CONTENTS page INT
21、RODUCTION . 4 Ciause Scope . Nor mat ive ref ere nces Definitions . Abbreviations Profile protocol stacks . Conformance requirements . 6.1 TASE.l requirements . 6.2 Upper layers requirements . Annex A (normative) ISPICS requirements lists . A.1 General . A.2 Classification of requirements A.3 TASE.l
22、 A.4 ROSE A.5 ACSE A.6 Presentation A.? Session . Annex B (informative) Bibliography Annex ZA Normative references to international publications with their corresponding European publications 8 8 8 10 10 10 13 15 19 20 . . O BSI 1998 STD-BSI BS EN b0870-6-701-ENGL 1998 81 Lb24bb9 074b549 39 m Page 4
23、 EN 60870-6-701:1998 INTRODUCTION This standard is one of the IEC 60870-6 series defining functional profiles to be used in telecommunication networks for electrical power systems. It is largely based on existing ISO/IEC International Standards and international standardized profiles (ISP). The noti
24、on of functional profiles is fundamental in the organization of the publications of IEC 60870-6. A description of functional profiles, their classification scheme, and the manner of defining them are laid down in IEC 60870-6-1 l. The present standard TASE.l application profile is an application-clas
25、s profile providing inter control system communication to control system applications. The TASE.l protocol in the application layer is specified in IEC 60870-6-501 2, and the TASE.l application services are specified in IEC 60870-6-502. The present standard refines the TASE.l to meet interoperabilit
26、y requirements and specifies requirements on the presentation and session layers. The TASE.l operates in a connection mode so this A-profile interfaces to a transport-class profile of the T- profile variety. * The numbers in square brackets refer to the bibliography given in annex B. STD*BSI BS EN b
27、0870-b-701-ENGL 1998 II Lb24bb7 074b550 550 IB1 Page 5 EN 60870-6-701:1998 CONTROL CENTRE APPLICATIONS APPLICATION * TASE.l I I TELECONTROL EQUIPMENT AND SYSTEMS - CONTROL CENTRE APPLICATIONS APPLICATION Part 6-701 : Telecontrol protocols compatible with IS0 standards and ITU-T recommendations - Fun
28、ctional profile for providing the TASE.l application service in end systems PRESENTATION SESSION 4 1 Scope c I b PRESENTATION Session protocol 1 + SESSION 4 This part of IEC 60870 desribes the functional profile (FP) which defines the provision of the TASE.l communication services between two contro
29、l centre end systems. This functional profile is supported by the transport services implemented in accordance with transport profiles defined for the type of network that interconnect the control centre end systems. Figure 1 illustrates the applicability of the functional profile. TASE.1 profile Pr
30、esentation protocol I 3 3 I l- NETWORK + IEC 7 17799 Figure 1 - Applicability of the functional profile 2 Normative references The following normative documents contain provisions which, through reference in this text, constitute provisions of this part of IEC 60870. At the time of publication, the
31、editions indicated were valid. All normative documents are subject to revision, and parties to agreements based on this part of IEC 60870 are encouraged to investigate the possibility of applying the most recent editions of the normative documents indicated below. Members of IEC and IS0 maintain reg
32、isters of currently valid International Standards. STD-BSI BS EN b0870-b-70L-ENGL 1998 H lb24bb7 074b55L 477 6 Page 6 EN 60870-6-701:1998 IEC 60870-6-502: 1 995, Telecontrol equipment and systems - Part 6: Telecontrol protocols compatible with IS0 standards and ITU-T recommendations - Section 502: T
33、ASE. 1 protocol definitions ISO/IEC 8326: 1987, Information processing systems - Open Systems Interconnection - Basic connection oriented session service definition ISOAEC 8327: 1987, Information processing systems - Open Systems Interconnection - Basic connection oriented session protocol specifica
34、tion ISO/I EC 8327-2: 1 996, Information technologies - Open Systems Interconnection - Connection- oriented session protocol - Protocol implementation conformance statement (PICS) proforma ISO/I EC 8649: 1 996, Information technologies - Open Systems Interconnection - Service definition for the Asso
35、ciation Control Service Element (ACSE) ISO/IEC 8650: 1988, Information processing systems - Open Systems Interconnection - Protocol Specification for the Association Control Service Element (ACSE) ISO/I EC 8650-2: 1 995, Information technology - Open Systems Interconnection - Protocol Specification
36、for the Association Control Service Element - Protocol Implementation Conformance Statement (PICS) proforma ISO/I EC 8822: 1 994, Information technology - Open Systems .Interconnection - Presentation service definition ISO/I EC 8823:-, Information technology - Open Systems Interconnection - Connecti
37、on- oriented presentation protocol ISO/I EC 8823-2: 1 995, Information technology - Open Systems Interconnection - Connection- oriented presentation protocol - Protocol Implementation Conformance Statement (PICS) proforma ISO/IEC 9072-2: 1 989, Information processing systems - Text communication - R
38、emote operations - Part 2: Protocols specification 3 Definitions For the purpose of this part of IEC 60870, the terms defined in the standards given in clause 2 are applicable. 4 Abbreviations For the purposes of this part of IEC 60870, the abbreviations defined in the standards given in clause 2 ar
39、e applicable. 5 Profile protocol stacks As shown in figure 2, the TASE.l profile includes the TASE.l, ROSE, and ACSE elements, the Connection-Mode Presentation protocol, and the Connection-Mode Session protocol. TASE.l ROSE ICOAEC 9072 IEC 1172/98 Figure 2 - TASE.l application profile 6 Conformance
40、requirements The ISPICS requirements lists for TASE.l, ROSE, ACSE, Presentation, and Session are given in annex A. For each implementation claiming conformance to this part of IEC 60870 an appropriate set of PiCSs shall be made available stating support or non-support of each option identified in th
41、is part of IEC 60870. 6.1 TASE.l requirements There are no TASE.l requirements besides those specified in the conformance statement given in IEC 60870-6-502. 6.2 Upper layers requirements The presentation protocol shall be able to support the Default Context Name option. The session protocol used sh
42、all be version 2. STD-BSI BS EN h087-b-701-ENGL 1998 e 1b24bb7 074b553 2bT I Page 8 EN 60870-6-701:1998 Annex A (normative) ISPICS requirements lists A.l General This annex describes the TASE.l , ROSE, ACSE, Presentation, and Session requirements in terms of tables which reference the base standard
43、PICS proforma. The tables are intended to give a precise specification of requirements. In case of arbitration or dispute, this annex takes precedence over clause 6 of this standard. In the PICS proforma reference column of the tables in this annex, and in the lists of conditional expressions undern
44、eath the tables, tables within the base standard PICS proformas are referenced. The first letter identifies the specific PICS proforma: ROSE - ISO/IEC 9072-2 ACSE - ISO/IEC 8650-2 TASE. 1 - IEC 60870-6-502 o Presentation - ISO/IEC 8823-2 Session - ISO/IEC 8327-2 The characters from the second charac
45、ter to the solidus form a reference to the specific subclause in the annex of that PICS proforma which contains the table in question. The number after the solidus references the row number in the table. A.2 Classification of requirements Throughout this annex, to specify the level of support for ea
46、ch feature, the following classification is used: 0 Init-CR: Initiator Conformance Requirement 0 Resp-CR: Responder Conformance Requirement A.2.1 Base column The “Base“ column reflects the definitions and specifications in the appropriate base standard. Each entry in this column is chosen from the f
47、ollowing list: 0 mandatory; m: that feature shall be supported, .e. its syntax and procedures shall be implemented as specified in the base standard. However, it is not a requirement that the feature shall be used in all instances of communication, unless mandated by the base standard; optional; o:
48、any feature denoted by “0“ is left to the implementation as to whether that feature is implemented or not. If a parameter is optionally supported, then the syntax shall be implemented, but it is left to each implementation whether the procedures are implemented or not. Where the base entry contains
49、two classifications separated by a comma, these reference the sending and receiving capabilities, respectively. STD-BSI BS EN b0870-b-701-ENGL 1998 U lb2Ybb9 074b55i 1Tb Page 9 EN 60870-6-701:1998 A.2.2 FIS Column The “F/S“ column reflects the requirements of this functional standard. Each entry in this column is chosen from the following terminology: supported; m: any feature denoted by “m“ is mandatory or optional in the base standard. That feature shall be supported, .e. its syntax and procedures shall be implemented as specified in the base standard or i
