1、BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06Electromagnetic compatibility (EMC)Part 6-5: Generic standards - Immunity for equipment used in power station and substation environment (IEC 61000-6-5:2015)BS EN 61000-6-5:2015Incorporating corrigendum December 2017Nat
2、ional forewordThis British Standard is the UK implementation of EN 6100065:2015. It is identical to IEC 6100065:2015, incorporating corrigendum December 2017. The UK participation in its preparation was entrusted to Technical Committee GEL/210, EMC Policy committee.A list of organizations represente
3、d on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2018 Published by BSI Standards Limited 2018ISBN 978 0 580 995
4、75 0ICS 33.100.20Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 December 2015.Amendments/corrigenda issued since publicationDate Text affected28 February 20
5、18 Implementation of IEC corrigendum December 2017: corrections to Table 5, Table 6, Table 9 and Table 10BRITISH STANDARDBS EN 6100065:2015EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 61000-6-5 November 2015 ICS 33.100.20 English Version Electromagnetic compatibility (EMC) - Part 6-5: Generi
6、c standards - Immunity for equipment used in power station and substation environment (IEC 61000-6-5:2015) Compatibilit lectromagntique (CEM) - Partie 6-5: Normes gnriques - Immunit pour les quipements utiliss dans les environnements de centrales lectriques et de postes (IEC 61000-6-5:2015) Elektrom
7、agnetische Vertrglichkeit (EMV) - Teil 6-5: Fachgrundnormen - Strfestigkeit von Betriebsmitteln, Gerten und Einrichtungen, die im Bereich von Kraftwerken und Schaltstationen verwendet werden (IEC 61000-6-5:2015) This European Standard was approved by CENELEC on 2015-09-25. CENELEC members are bound
8、to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-
9、CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Ce
10、ntre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, It
11、aly, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr
12、 Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 61000-6-5:2015 E BS EN 6100065:2015EN 61000-6-5:2015 2 European foreword The text of do
13、cument 77/484/FDIS, future edition 1 of IEC 61000-6-5, prepared by IEC/TC 77 “Electromagnetic compatibility“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61000-6-5:2015. The following dates are fixed: latest date by which the document has to be implemented at national
14、 level by publication of an identical national standard or by endorsement (dop) 2016-06-25 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2018-09-25 Attention is drawn to the possibility that some of the elements of this document may be the subje
15、ct of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CENELEC by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directiv
16、e(s). For the relationship with EU Directive(s) see informative Annex ZZ, which is an integral part of this document. Endorsement notice The text of the International Standard IEC 61000-6-5:2015 was approved by CENELEC as a European Standard without any modification. In the official version, for Bib
17、liography, the following notes have to be added for the standards indicated: IEC 61000-2 NOTE Harmonized in EN 61000-2 series. IEC 61000-6-4 NOTE Harmonized as EN 61000-6-4. IEC 60255-1:2009 NOTE Harmonized as EN 60255-1:2010 (not modified). IEC 60255-26:2013 NOTE Harmonized as EN 60255-26:2013 (not
18、 modified). IEC 61439-1:2011 NOTE Harmonized as EN 61439-1:2011 (not modified). IEC 62271-1:2007 NOTE Harmonized as EN 62271-1:2008 (not modified). IEC 60870-2-1:1995 NOTE Harmonized as EN 60870-2-1:1996 (not modified). IEC 61000-6-2:2005 NOTE Harmonized as EN 61000-6-2:2005 (not modified). IEC 6132
19、6-1:2012 NOTE Harmonized as EN 61326-1:2013 (not modified). IEC 61812-1:2011 NOTE Harmonized as EN 61812-1:2011 (not modified). BS EN 6100065:2015EN 61000-6-5:2015 3 IEC 61000-4-1 NOTE Harmonized as EN 61000-4-1. IEC 61000-4-12:2006 NOTE Harmonized as EN 61000-4-12:2006 (not modified). IEC 61000-4-1
20、9:2014 NOTE Harmonized as EN 61000-4-19:2014 (not modified). BS EN 6100065:2015EN 61000-6-5:2015 4 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this d
21、ocument and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indic
22、ated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 61000-4-2 - Electromagnetic compatibility (EMC) - Part 4-2: Testing and measurement
23、techniques - Electrostatic discharge immunity test EN 61000-4-2 2009 IEC 61000-4-3 - Electromagnetic compatibility (EMC) - Part 4-3: Testing and measurement techniques - Radiated, radio-frequency, electromagnetic field immunity test EN 61000-4-3 + A1 + A2 2006 2008 2010 IEC 61000-4-4 - Electromagnet
24、ic compatibility (EMC) - Part 4-4: Testing and measurement techniques - Electrical fast transient/burst immunity test EN 61000-4-4 2012 IEC 61000-4-5 - Electromagnetic compatibility (EMC) - Part 4-5: Testing and measurement techniques - Surge immunity test EN 61000-4-5 2014 IEC 61000-4-6 - Electroma
25、gnetic compatibility (EMC) - Part 4-6: Testing and measurement techniques - Immunity to conducted disturbances, induced by radio-frequency fields EN 61000-4-6 2014 IEC 61000-4-8 - Electromagnetic compatibility (EMC) - Part 4-8: Testing and measurement techniques - Power frequency magnetic field immu
26、nity test EN 61000-4-8 2010 IEC 61000-4-11 - Electromagnetic compatibility (EMC) - Part 4-11: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests EN 61000-4-11 2004 BS EN 6100065:2015EN 61000-6-5:2015 5 Publication Year Title EN/HD Year IEC 61
27、000-4-16 - Electromagnetic compatibility (EMC) - Part 4-16: Testing and measurement techniques - Test for immunity to conducted, common mode disturbances in the frequency range 0 Hz to 150 kHz EN 61000-4-16 + A1 + A2 1998 2004 2011 IEC 61000-4-17 - Electromagnetic compatibility (EMC) - Part 4-17: Te
28、sting and measurement techniques - Ripple on d.c. input power port immunity test EN 61000-4-17 + A1 + A2 1999 2004 2009 IEC 61000-4-18 - Electromagnetic compatibility (EMC) - Part 4-18: Testing and measurement techniques - Damped oscillatory wave immunity test EN 61000-4-18 + corrigendum Sep. + A1 2
29、007 2007 2010 IEC 61000-4-29 - Electromagnetic compatibility (EMC) - Part 4-29: Testing and measurement techniques - Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests EN 61000-4-29 2000 IEC 61000-4-34 - Electromagnetic compatibility (EMC) - Part 4-34: T
30、esting and measurement techniques - Voltage dips, short interruptions and voltage variations immunity tests for equipment with input current more than 16 A per phase EN 61000-4-34 + A1 2007 2009 IEC 61000-6-1 - Electromagnetic compatibility (EMC) - Part 6-1: Generic standards - Immunity for resident
31、ial, commercial and light-industrial environments EN 61000-6-1 2007 BS EN 6100065:2015 2 IEC 61000-6-5:2015 IEC 2015 CONTENTS FOREWORD . 4 INTRODUCTION . 6 1 Scope and object . 7 2 Normative references 8 3 Terms, definitions and abbreviations . 9 3.1 Terms and definitions 9 3.2 Abbreviations 12 4 El
32、ectromagnetic environment . 12 5 Performance criteria 16 6 Conditions during testing . 18 7 Product documentation 19 8 Applicability . 19 9 Measurement uncertainty 20 10 Immunity requirements 20 10.1 General . 20 10.2 Immunity test requirements for equipment in power stations . 20 10.3 Immunity test
33、 requirements for equipment in substations 24 Annex A (informative) Information on electromagnetic phenomena, typical sources and causes 29 Annex B (informative) Overview of the effect of the electromagnetic phenomena on the functions of equipment and systems . 30 Annex C (informative) Guidelines fo
34、r protected zones Mitigation of radiated and conducted disturbances 34 C.1 General . 34 C.2 General approach . 34 C.3 Classification of protection zones 35 C.3.1 General . 35 C.3.2 Zone 1 Building shield 36 C.3.3 Zone 2 Room shield 36 C.3.4 Zone 3 Equipment shield 37 C.3.5 Zone 4 Additional protecti
35、on . 37 C.4 Design principles for shielding 37 C.5 Shielding effectiveness . 37 Annex D (informative) Guidance for the user of this standard . 39 Bibliography 40 Figure 1 Equipment ports . 10 Figure 2 Example of the situation of a power station 14 Figure 3 Example of the situation of an air-insulate
36、d substation (AIS) 15 Figure 4 Example of the situation of a gas-insulated substation (GIS) 16 Figure C.1 Equipment ports . 34 Figure C.2 Zones of protection of shielding and earthing systems 36 BS EN 6100065:2015IEC 61000-6-5:2015 IEC 2015 3 Table 1 Characterization of the electromagnetic phenomena
37、 . 13 Table 2 Suggested performance criteria for some representative functions 18 Table 3 Immunity requirements Power station Enclosure port . 21 Table 4 Immunity specifications Power station Signal/control ports 22 Table 5 Immunity specifications Power station Low voltage a.c. input and output powe
38、r ports . 23 Table 6 Immunity specifications Power station Low voltage d.c. input and output power ports . 24 Table 7 Immunity specifications Substation Enclosure port 25 Table 8 Immunity specifications Substation Signal/control ports . 26 Table 9 Immunity specifications Substation Low voltage a.c.
39、input and output power ports . 27 Table 10 Immunity specifications Substation Low voltage d.c. input and output power ports . 28 Table A.1 Electromagnetic phenomena Sources and causes . 29 Table D.1 Immunity tests and test levels to be considered in the future or for particular product families . 39
40、 BS EN 6100065:2015 4 IEC 61000-6-5:2015 IEC 2015 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ ELECTROMAGNETIC COMPATIBILITY (EMC) Part 6-5: Generic standards Immunity for equipment used in power station and substation environment FOREWORD 1) The International Electrotechnical Commission (IEC) is a w
41、orldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to othe
42、r activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the s
43、ubject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions
44、determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National C
45、ommittees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in w
46、hich they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publi
47、cation and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is
48、not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its tech
49、nical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indisp