1、Industrial-process control systems Instruments with analogue inputs and two- or multi-position outputsPart 1: Methods for evaluating performanceBS EN 61003-1:2016BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06National forewordThis British Standard is the UK implemen
2、tation of EN 61003-1:2016. It is identical to IEC 61003-1:2016. It supersedes BS EN 61003-1:2004 which will be withdrawn 04 November 2019.The UK participation in its preparation was entrusted by TechnicalCommittee GEL/65, Measurement and control, to Subcommittee GEL/65/2,Elements of systems.A list o
3、f organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions ofa contract. Users are responsible for its correct application. The British Standards Institution 2017.Published by BSI Standards Limite
4、d 2017ISBN 978 0 580 85541 2ICS 25.040.40; 35.240.50Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 January 2017.Amendments/corrigenda issued since publication
5、Date Text affectedBRITISH STANDARDBS EN 61003-1:2016EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 61003-1 November 2016 ICS 25.040.40; 35.240.50 Supersedes EN 61003-1:2004 English Version Industrial-process control systems - Instruments with analogue inputs and two- or multi-position outputs
6、- Part 1: Methods for evaluating performance (IEC 61003-1:2016) Systmes de commande de processus industriels - Instruments avec entres analogiques et sorties deux ou plusieurs positions - Partie 1: Mthodes dvaluation des performances (IEC 61003-1:2016) Systeme der industriellen Prozessleittechnik -
7、Gerte mit analogen Eingngen und Zwei- oder Mehrpunktverhalten - Teil 1: Verfahren zur Bewertung des Betriebsverhaltens (IEC 61003-1:2016) This European Standard was approved by CENELEC on 2016-07-19. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the co
8、nditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard
9、 exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the
10、 national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland
11、, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17
12、, B-1000 Brussels 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 61003-1:2016 E BS EN 61003-1:2016EN 61003-1:2016 2 European foreword The text of document 65B/1040/FDIS, future edition 3 of IEC 61003-1, prepared by SC 65B “Mea
13、surement and control devices“, of IEC/TC 65 “Industrial-process measurement, control and automation“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61003-1:2016. The following dates are fixed: latest date by which the document has to be implemented at national level by
14、publication of an identical national standard or by endorsement (dop) 2017-05-04 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2019-11-04 This document supersedes EN 61003-1:2004. Attention is drawn to the possibility that some of the elements o
15、f this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 61003-1:2016 was approved by CENELEC as a European Standard without any modification. In
16、the official version, for Bibliography, the following note has to be added for the standard indicated : IEC 61326-1:2012 NOTE Harmonized as EN 61326-1:2013 (not modified). BS EN 61003-1:2016EN 61003-1:2016 3 Annex ZA (normative) Normative references to international publications with their correspon
17、ding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any a
18、mendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu. Publication Y
19、ear Title EN/HD Year IEC 60050 series International Electrotechnical Vocabulary (IEV) - - IEC 60050-300 - International Electrotechnical Vocabulary - Electrical and electronic measurements and measuring instruments - Part 311: General terms relating to measurements - Part 312: General terms relating
20、 to electrical measurements - Part 313: Types of electrical measuring instruments - Part 314: Specific terms according to the type of instrument - - IEC 60050-351 - International Electrotechnical Vocabulary - Part 351: Control technology - - IEC 61298-1 2008 Process measurement and control devices -
21、 General methods and procedures for evaluating performance - Part 1: General considerations EN 61298-1 2008 IEC 61298-2 2008 Process measurement and control devices - General methods and procedures for evaluating performance - Part 2: Tests under reference conditions EN 61298-2 2008 IEC 61298-3 2008
22、 Process measurement and control devices - General methods and procedures for evaluating performance - Part 3: Tests for the effects of influence quantities EN 61298-3 2008 IEC 61298-4 - Process measurement and control devices - General methods and procedures for evaluating performance - Part 4: Eva
23、luation report content EN 61298-4 - BS EN 61003-1:2016 2 IEC 61003-1:2016 IEC 2016 CONTENTS FOREWORD . 4 INTRODUCTION . 6 1 Scope 7 2 Normative references. 7 3 Terms and definitions 8 4 General conditions for tests . 9 4.1 Documentary information . 9 4.1.1 General reference documents. 9 4.1.2 Collec
24、t data . 10 4.2 Electrical safety 10 4.3 Installation 10 4.4 Supply conditions 10 5 General testing procedures and precautions . 10 5.1 Checking of calibration made prior to delivery 10 5.2 Set point . 10 5.3 Differential gap . 11 6 Test methods and procedures 11 6.1 Tests under reference conditions
25、 . 11 6.1.1 Switching accuracy related factors 11 6.1.2 Mean switching point 12 6.1.3 Set point 12 6.2 Tests for the effects of influence quantities 12 6.2.1 Ambient temperature 12 6.2.2 Humidity 13 6.2.3 Vibrations 13 6.2.4 Shock, drop and topple 14 6.2.5 Mounting position . 14 6.2.6 Over-range 14
26、6.2.7 Output load effects . 14 6.2.8 Supply voltage and frequency variations . 14 6.2.9 Short-term supply voltage interruptions . 14 6.2.10 Fast transient/burst immunity requirements . 15 6.2.11 Supply pressure variations . 15 6.2.12 Common mode interference 15 6.2.13 Normal mode interference (serie
27、s mode) 15 6.2.14 Earthing . 15 6.2.15 Magnetic field effects . 15 6.2.16 Electromagnetic field 16 6.2.17 Electrostatic discharge (ESD) . 16 6.2.18 Effect of open-circuited and short-circuited input . 16 6.2.19 Effect of open-circuited and short-circuited output . 16 6.2.20 Effect of process medium
28、temperature 16 6.2.21 Atmospheric pressure effects . 17 6.2.22 Start-up drift 17 6.2.23 Accelerated operational life test . 17 6.3 Other tests 17 BS EN 61003-1:2016IEC 61003-1:2016 IEC 2016 3 6.3.1 Transient response of a two-position output 17 6.3.2 Indication of the measured value 18 6.3.3 Adjusta
29、ble differential gap 18 6.3.4 Dielectric strength 18 6.3.5 Insulation resistance 19 7 Multi-position output 19 7.1 Action . 19 7.2 Test 19 7.2.1 Characteristics of the multi-position output . 19 7.2.2 Mutual influence of pairs of switching points . 19 7.2.3 Determination of switching range 19 8 Gene
30、ral observations . 19 8.1 Protective finishes . 19 8.2 Tools and equipment . 19 9 Test report and summary of tests . 20 10 Partial evaluation . 23 Bibliography . 24 Figure 1 Action of two-position output . 8 Figure 2 Action of three-position output 9 Table 1 An example of a report (1 of 4) 20 BS EN
31、61003-1:2016 4 IEC 61003-1:2016 IEC 2016 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ INDUSTRIAL-PROCESS CONTROL SYSTEMS INSTRUMENTS WITH ANALOGUE INPUTS AND TWO- OR MULTI-POSITION OUTPUTS Part 1: Methods for evaluating performance FOREWORD 1) The International Electrotechnical Commission (IEC) is a
32、worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to oth
33、er activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the
34、subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions
35、 determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National
36、Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in
37、which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publ
38、ication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is
39、 not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its tec
40、hnical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IE
41、C Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subj
42、ect of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 61003-1 has been prepared by subcommittee SC 65B: Measurement and control devices, of IEC technical committee TC 65: Industrial-process measurement, control and automatio
43、n. This third edition cancels and replaces the second edition published in 2004. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) use of the term “two-position output” instead of “two-state instr
44、ument” (see 3.2); b) use of the term “differential gap” instead of “switching differential” (see 3.4); c) use of “fast transient/burst immunity requirements” instead of “power supply transient overvoltages”, and revision of the test method (see 6.2.10); BS EN 61003-1:2016IEC 61003-1:2016 IEC 2016 5
45、d) deletion of 6.2.12 “common mode interference” and 6.2.13 “normal mode interference (series mode) ”tests of the previous edition; e) use of the term “electromagnetic field” instead of “radiated electromagnetic interference”, the test method remained the same (see 6.2.16); f) use of the term “diele
46、ctric strength” instead of “isolation test”, and revision of the reference (see 6.3.4); g) deletion of Subclauses “8.2 Design features”, “10.1 Routine maintenance and adjustment” and “10.2 Repair” of the previous edition. The text of this standard is based on the following documents: FDIS Report on
47、voting 65B/1040/FDIS 65B/1050/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all parts of the IEC 61003 series, publ
48、ished under the general title Industrial-process control systems Instruments with analogue inputs and two or multi-position outputs, can be found on the IEC website. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC we
49、bsite under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. BS EN 61003-1:2016 6 IEC 61003-1:2016 IEC 2016 INTRODUCTION The methods of evaluation specified in this part of IEC 61003 are intended for use by manufacturers to determine the performance of their products and by users, or independent testing establishments, to verify the manufacturers performance sp
