1、BSI Standards PublicationBSI Standards PublicationSafety of transportablemotor-operated electric toolsPart 2-11: Particular requirements forcombined mitre and bench saws BS EN 61029-2-11:2012BS EN 61029-2-11:2012+A11:2013Incorporating corrigendum November 2013BS EN 61029-2-11:2012+A11:2013National f
2、orewordThis British Standard is the UK implementation ofEN 61029-2-11:2012+A11:2013. It was derived from IEC 61029-2:2001. It supersedes BS EN 61029-2-11:2012, which will be withdrawn on 12 August 2016.The CENELEC common modifications have been implemented at theappropriate places in the text. The s
3、tart and finish of each commonmodification is indicated in the text by tags .The UK participation in its preparation was entrusted to TechnicalCommittee CPL/116, Safety of motor-operated electric tools.A list of organizations represented on this committee can be obtainedon request to its secretary.T
4、his publication does not purport to include all the necessary provisionsof a contract. Users are responsible for its correct application. The British Standards Institution 2013.Published by BSI Standards Limited 2013ISBN 978 0 580 84740 0ICS 25.080.60; 25.140.20Compliance with a British Standard can
5、not confer immunity fromlegal obligations.This British Standard was published under the authority of the StandardsPolicy and Strategy Committee on 31 January 2013.Amendments/corrigenda issued since publicationDate Text affectedImplementation of CENELEC amendment A11:2013:Subclause 18.Z106 amendedCor
6、rection to supersession details in national forewordBRITISH STANDARD31 October 2013 30 November 2013 EUROPEAN STANDARD EN 61029-2-11 NORME EUROPENNE EUROPISCHE NORM October 2012 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europische
7、s Komitee fr Elektrotechnische Normung Management Centre: Avenue Marnix 17, B - 1000 Brussels 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 61029-2-11:2012 E ICS 25.080.60; 25.140.20 Supersedes EN 61029-2-11:2009English ver
8、sion Safety of transportable motor-operated electric tools - Part 2-11: Particular requirements for combined mitre and bench saws (IEC 61029-2-11:2001, modified) Scurit des machines-outils lectriques semi-fixes -Partie 2-11: Rgles particulires pourles scies dtabli-scies mortaiser (CEI 61029-2-11:200
9、1, modifie) Sicherheit transportabler motorbetriebener Elektrowerkzeuge -Teil 2-11: Besondere Anforderungen fr kombinierte Tisch- und Gehrungssgen(IEC 61029-2-11:2001, modifiziert) This European Standard was approved by CENELEC on 2012-09-03. CENELEC members are bound to comply with the CEN/CENELEC
10、Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to
11、 any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the
12、 official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembo
13、urg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. EN 61029-2-11:2012+A11September 2013 4 Foreword This document (EN 61029-2-11:2012) consists of the text of IEC 61029-2-11:2001 prepared by IEC/SC 61F (transf
14、ormed into IEC TC 116 “Safety of hand-held motor-operated electric tools“), together with the common modifications prepared by CLC/TC 116 “Safety of motor-operated electric tools“. The following dates are fixed: latest date by which the document has to be implemented at national level by publication
15、 of an identical national standard or by endorsement (dop) 2013-09-03 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2015-09-03 This document supersedes EN 61029-2-11:2009. EN 61029-2-11:2012 includes the following significant technical changes w
16、ith respect to EN 61029-2-11:2009: introduction of linked action rewording of some clauses; improvement and clarification of Clause 18. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsib
17、le for identifying any or all such patent rights. This European Standard is divided into two parts: Part 1 General requirements, which are common to most transportable motor, operated tools (for the purpose of this European Standard referred to simply as tools) which could come within the scope of t
18、his European Standard. Part 2 Requirements for particular types of tool which either supplement or modify the requirements given in Part 1 to account for the particular hazards and characteristics of these specific tools. Compliance with the relevant clauses of Part 1 together with a relevant Part 2
19、 of this European Standard provides one means of conforming to the specified essential requirements of the Directive. This European Standard follows the overall requirements of EN ISO 12100. For noise and vibration, this European Standard covers the requirements for their measurement, the provisions
20、 of information arising from these measurements and the provision of information about the Personal Protective Equipment required. Specific requirements for the reduction of the risk arising from noise and vibration through the design of the tool are not given as this reflects the current state of a
21、rt. Warning: Other requirements arising from other EU Directives can be applicable to the products falling within the scope of this European Standard. BS EN 61029-2-11:2012 EN 61029-2-11:2012 (E)BS EN 61029-2-11:2012+A11:2013EN 61029-2-11:2012+A11:2013 (E) 2 - 3 - EN 61029-2-11:2012/A11:2013Foreword
22、This document (EN 61029-2-11:2012/A11:2013) has been prepared by CLC/TC 116 “Safety of motor-operated electric tools“.The following dates are fixed: latest date by which this document has to be implementedat national level by publication of an identical national standard or by endorsement(dop) 2014-
23、08-12 latest date by which the national standards conflicting with this document have to be withdrawn(dow) 2016-08-12This amendment was developed to include a requirement about the operative condition of the saw unit after completing the test according to 18.Z106.Attention is drawn to the possibilit
24、y that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. 5 CEN has prepared standards for industrial machines, which may extend to transportable machines. Although CEN and CENELEC
25、 have where appropriate used common solutions to provide uniform levels of protection, persons using this European Standard should check the scope of both this and CEN standards to ensure that a correct standard is used. This Part 2-11 is to be used in conjunction with EN 61029-1:2009. This Part 2-1
26、1 supplements or modifies the corresponding clauses of EN 61029-1, so as to convert it into the European Standard: “Particular requirements for combined mitre and bench saws”. Where a particular subclause of Part 1 is not mentioned in this Part 2-11, that subclause applies as far as reasonable. Wher
27、e this Part 2-11 states “addition“ “modification“ or “replacement“, the relevant text of Part 1 is to be adapted accordingly. Clauses, subclauses, notes, tables and figures which are additional to those in Part 1 are numbered starting from 101. Clauses, subclauses, notes, tables and figures which ar
28、e additional to those in IEC 61029-2-11 are prefixed “Z“. NOTE In this European Standard, the following print types are used: - requirements proper: in roman type; - test specifications: in italic type; - explanatory matter: in smaller roman type. This document has been prepared under a mandate give
29、n to CENELEC by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive. For the relationship with EU Directive 2006/42/EC, see informative Annex ZZ, which is an integral part of this document. Endorsement notice The text of the Internatio
30、nal Standard IEC 61029-2-11:2001 was approved by CENELEC as a European Standard with agreed common modifications. BS EN 61029-2-11:2012 EN 61029-2-11:2012 (E)BS EN 61029-2-11:2012+A11:2013EN 61029-2-11:2012+A11:2013 (E) 3 - 3 - EN 61029-2-11:2012/A11:2013ForewordThis document (EN 61029-2-11:2012/A11
31、:2013) has been prepared by CLC/TC 116 “Safety of motor-operated electric tools“.The following dates are fixed: latest date by which this document has to be implementedat national level by publication of an identical national standard or by endorsement(dop) 2014-08-12 latest date by which the nation
32、al standards conflicting with this document have to be withdrawn(dow) 2016-08-12This amendment was developed to include a requirement about the operative condition of the saw unit after completing the test according to 18.Z106.Attention is drawn to the possibility that some of the elements of this d
33、ocument may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights.Foreword to amendment A11 2 Contents Foreword . 41 Scope . 62 Definitions 63 General requirement . 74 General notes on tests 75 Rating . 76 Classification 77 Ma
34、rking and information for use . 78 Protection against electric shock . 99 Starting . 910 Input and current 1011 Heating . 1012 Leakage current . 1013 Environmental requirements 1014 Protection against ingress of foreign bodies and moisture resistance 1015 Insulation resistance and electric strength
35、1116 Endurance . 1117 Abnormal operation . 1118 Stability and mechanical hazards 1119 Mechanical strength 2020 Construction. 2121 Internal wiring . 2222 Components 2223 Supply connection and external flexible cables and cords 2224 Terminals for external conductors . 2225 Provision for earthing 2226
36、Screws and connections 2227 Creepage distances, clearances and distance through insulation 2328 Resistance to heat, fire and tracking . 2329 Resistance to rusting . 2330 Radiation . 23Annex A (normative) Normative references . 44Annex ZD (informative) Dust measurement . 45Annex ZZ (informative) Cove
37、rage of Essential Requirements of Directive 2006/42/EC 46BS EN 61029-2-11:2012 EN 61029-2-11:2012 (E) 2 Contents Foreword . 41 Scope . 62 D finitions 63 requirement . 74 General notes on tests 75 Rating . 76 Cl ssification 7 Marking and information for use 78 Protection against electric shock . 99 S
38、tarting . 910 Input and current 1011 H tin . 1012 Leakage current . 1013 Environmental requirements 1014 Protection against ingress of foreign bodies and moisture resistance 1015 Insulation resistance and electric strength 1116 Endu ance . 1117 Abnormal operation . 18 Stability and m chanical hazard
39、s 1119 Mechanical strength 2020 Construct o . 2121 Internal wiring . 2222 Compone ts 2223 Supply connection and external flexible cables and cords 24 Terminals for ex er al conductors . 2225 Provision for earthing 2226 Scr ws and conn ctions 2227 Creep ge distances, clearances and distance through i
40、nsulation 28 heat, fire and tracking . 2329 es s ance to rusting . 2330 Radiati n . 23A (normative) Norma ive refe nces 44Annex D infor ative) Dust measurement . 45Annex ZZ (informative) Coverage of Essential Requirements of Directive 2006/42/EC 46BS EN 61029-2-11:2012 EN 61029-2-11:2012 (E)BS EN 61
41、029-2-11:2012+A11:2013EN 61029-2-11:2012+A11:2013 (E) 4 3 Figures Figure Z101 Combined mitre and bench saw (Type “A”) . 24Figure Z102 Combined mitre and bench saw (Type “B”) . 25Figure Z103 Orientation of tool and operator 26Figure Z104 Saw blade areas Combined mitre and bench saw in mitre saw posit
42、ion (Type “B”) . 27Figure Z105 Self-closing guard Opening angle . 28Figure Z106 Open guard construction 29Figure Z107 Guarding of saw blade relative to mitre saw table position (Type “A” machine) 29Figure Z108 Dimensions of test probe . 30Figure Z109 Riving knife mounted guard . 30Figure Z110 Top gu
43、ard side walls 31Figure Z111 Saw blade guard Stability test 32Figure Z112 Guarding below the bench table (Type “B” machine) . 34Figure Z113 Width of the slot in the table . 34Figure Z114 Dimensions of the bench saw table . 35Figure Z115 Riving knife adjustment 36Figure Z116 Riving knife testing Stre
44、ngth of riving knife mounting . 37Figure Z117 Riving knife testing Resiliency of riving knife 38Figure Z118 Two position rip fence 39Figure Z119 Distance between fence and saw blade in mitre saw mode 40Figure Z120 Flange characteristics 41Figure Z121 Examples of push stick and push block handle . 42
45、Figure Z122 Saw with workpiece support in mitre saw mode 43Tables Table Z101 Noise test conditions for combined mitre and bench saws . 10Table ZD.101 Conditions for dust measurement 45BS EN 61029-2-11:2012 EN 61029-2-11:2012 (E)BS EN 61029-2-11:2012+A11:2013EN 61029-2-11:2012+A11:2013 (E) 5 6 1 Scop
46、e This clause of Part 1 is applicable except as follows: 1.1 Addition: This European Standard applies to transportable combined mitre and bench saws with a saw blade diameter not exceeding 315 mm and intended for cutting wood and analogous materials, plastics and non-ferrous metals except magnesium.
47、 1.2 Addition: This European Standard does not apply to transportable mitre and bench saws intended to be used to cut ferrous metals, magnesium or food. This standard does not apply to single function bench saws; single function mitre saws; combined mitre and bench saws other than transportable. NOT
48、E Z101 Transportable single function bench saws are covered by EN 61029-2-1. NOTE Z102 Transportable single function mitre saws are covered by EN 61029-2-9. NOTE Z103 EN 1870-3 gives requirements for combined mitre and bench saws for cutting wood other than transportable. 2 Definitions This clause of Part 1 is applicable except as follows: 2.21 Replacement: 2.21 normal load load to obtain rated input Addition: 2.101 combined mitre and bench saw saw intended to be used: a) as a down-cutting cross cut saw; b) as a circular bench saw Note 1 to entry The saw may be of type “A
