1、BSI Standards PublicationBS EN 61029-2-5:2011Safety of transportable motor-operated electric tools Part 2-5: Particular requirements for bandsawsBS EN 61029-2-5:2011+A11:2015BS EN 61029-2-5:2011+A11:2015 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 61029-2-5:
2、2011+A11:2015. It is derived from IEC61029-2-5:1993. It supersedes BS EN 61029-2-5:2011 which will bewithdrawn on 1 December 2016.The CENELEC common modifications have been implemented at thetext. The start and finish of each common modification is indicated inthe text by tags .Where a common modifi
3、cation has been introduced by amendment, the tags carry the number of the amendment. For example, the commonmodifications introduced by CENELEC amendment A11 are indicated by .The UK participation in its preparation was entrusted to TechnicalCommittee CPL/116, Safety of motor-operated electric tools
4、.A list of organizations represented on this committee can be obtainedon request to its secretary.This publication does not purport to include all the necessary provisionsof a contract. Users are responsible for its correct application. The British Standards Institution 2015.Published by BSI Standar
5、ds Limited 2015ISBN 978 0 580 86849 8ICS 25.080.60; 25.140.20Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of the StandardsPolicy and Strategy Committee on 29 February 2012.Amendments/corrigenda issued since pu
6、blicationDate Text affected31 January 2015 Implementation of CENELEC amendment A11:2015EUROPEAN STANDARD EN 61029-2-5 NORME EUROPENNE EUROPISCHE NORM November 2011 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr E
7、lektrotechnische Normung Management Centre: Avenue Marnix 17, B - 1000 Brussels 2011 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 61029-2-5:2011 E ICS 25.080.60; 25.140.20 Supersedes EN 61029-2-5:2002English version Safety of t
8、ransportable motor-operated electric tools - Part 2-5: Particular requirements for band saws (IEC 61029-2-5:1993, modified + A1:2001, modified) Scurit des machines-outils lectriques semi-fixes - Partie 2-5: Rgles particulires pour les scies ruban (CEI 61029-2-5:1993, modifie + A1:2001, modifie) Sich
9、erheit transportabler motorbetriebener Elektrowerkzeuge - Teil 2-5: Besondere Anforderungen fr Bandsgen (IEC 61029-2-5:1993, modifiziert + A1:2001, modifiziert) This European Standard was approved by CENELEC on 2011-10-10. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations
10、 which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member.
11、 This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions.
12、CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Roma
13、nia, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. EN 61029-2-5:2011+A11January 2015 2 Foreword This document (EN 61029-2-5:2011) consists of the text of IEC 61029-2-5:1993 and its amendment 1:2001, prepared by IEC/TC 116 “Safety of motor-operated electric tools“, together w
14、ith the common modifications prepared by the CLC/TC 116, “Safety of motor-operated electric tools“ The following dates are fixed: latest date by which the existence of the EN has to be announced at national level (doa) 2012-04-10 latest date by which the EN has to be implemented at national level by
15、 publication of an identical national standard or by endorsement (dop) 2012-10-10 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2014-10-10 This document supersedes EN 61029-2-5:2002. The main changes with respect to EN 61029-2-5:2002 are in 7.13 (impr
16、oved wording) and in Clause 18 (Stability and mechanical hazards). Additionally, dust measurement is now handled in the new Annex ZD instead of 13.1. These changes aim to adapt EN 61029-2-5 to EN 61029-1:2009 and to MD (2006/42/EC). In this document the common modifications to the International Stan
17、dard are indicated by .This European Standard is divided into two parts: Part 1 General requirements that are common to most transportable electric motor operated tools (for the purpose of this standard referred to simply as tools) which could come within the scope of this standard; Part 2 Requireme
18、nts for particular types of tool which either supplement or modify the requirements given in Part 1 to account for the particular hazards and characteristics of these specific tools. This European Standard has been prepared under a mandate given to CEN/CENELEC by the European Commission and the Euro
19、pean Free Trade Association and covers essential requirements of EC Directive 2006/42/EC. See Annex ZZ. Compliance with the relevant clauses of Part 1 together with this Part 2 provides one means of conforming with the specified essential health and safety requirements of the Directives. This Europe
20、an Standard follows the overall requirements of EN ISO 12100. For noise and vibration, this European Standard covers the requirements for their measurement, the provision of information arising from these measurements and the provision of information about the personal protective equipment required.
21、 Specific requirements for the reduction of the risk arising from noise and vibration through the design of the tool are not given as this reflects the current state of the art. Warning: Other requirements arising from other EC Directives can be applicable to the products falling within the scope of
22、 this standard. BS EN 61029-2-5:2011+A11:2015EN 61029-2-5:2011+A11:2015 2 EN 61029-2-5:2011/A11:2015 2 Foreword This document (EN 61029-2-5:2011/A11:2015) has been prepared by CLC/TC 116 “Safety of motor-operated electric tools“. The following dates are fixed: latest date by which this document has
23、to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2015-12-01 latest date by which the national standards conflicting with this document have to be withdrawn (dow) 2016-12-01 This amendment was developed to bring EN 61029-2-5:2011 in line wit
24、h the European Machinery Directive 2006/42/EC. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a
25、 mandate given to CENELEC by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). 3 This Part 2-5 is to be used in conjunction with EN 61029-1:2009. This Part 2-5 supplements or modifies the corresponding clauses of EN 61029-1, so a
26、s to convert it into the European Standard: “Safety requirements for transportable band saws“. Where a particular subclause of Part 1 is not mentioned in this Part 2-5, that subclause applies as far as is reasonable. Where this Part 2-5 states “addition“, “modification“ or “replacement“, the relevan
27、t text of Part 1 is to be adapted accordingly. Subclauses, tables and figures which are additional to those in Part 1 are numbered starting from 101. Subclauses, tables and figures which are additional to those in IEC 61029-2-5 are prefixed “Z“. NOTE In this standard the following print types are us
28、ed: - Requirements proper; - Test specifications; - Explanatory matter. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. BS EN 61029-2-
29、5:2011+A11:2015EN 61029-2-5:2011+A11:2015 3 EN 61029-2-5:2011/A11:2015 2 Foreword This document (EN 61029-2-5:2011/A11:2015) has been prepared by CLC/TC 116 “Safety of motor-operated electric tools“. The following dates are fixed: latest date by which this document has to be implemented at national
30、level by publication of an identical national standard or by endorsement (dop) 2015-12-01 latest date by which the national standards conflicting with this document have to be withdrawn (dow) 2016-12-01 This amendment was developed to bring EN 61029-2-5:2011 in line with the European Machinery Direc
31、tive 2006/42/EC. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate given to CENELEC by t
32、he European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). Foreword amendment A11 19 Annex ZD (informative) Dust measurement Replacement of the text of Part 1: If the manufacturer gives information on the dust collection efficiency, the ef
33、fectiveness of the dust collection devices shall be measured under the following test conditions. Tests under working conditions, including appropriate rest periods, are carried out in the test cabin (see Figure ZD.1 of Part 1) specified in EN 1093-3 and measurements of dust emission are made in acc
34、ordance with that standard. The orientation in the cabin shall be such that the passage of dust towards the measuring tunnel is not impeded. The tests under working conditions, orientation within the cabin (see Figure ZD.101) and material to be worked shall be in accordance with Table ZD.101. Table
35、ZD.101 Conditions for dust measurements Material Beech 20 mm 400 mm width as required, planed both sides Feed speed At a brisk pace without overloading the tool Depth of cut 20 mm - upper guide set 40 mm above the table Width of cut-off 5 mm minimum at 90 as set by the parallel fence Tool bit New sa
36、w band suitable for this material and working process Orientation Across the width of the cabin with air flow from left to right of the operator Test cycle Two cuts per minute for 10 min, followed by a 2 min rest period (total 12 min) Test period Five complete cycles (total 1 h) BS EN 61029-2-5:2011
37、+A11:2015EN 61029-2-5:2011+A11:2015 4 This annex of Part 1 is not applicable. 21 Annex ZZ (informative) Coverage of Essential Requirements of Directive 2006/42/EC This European Standard has been prepared under a mandate given to CENELEC by the European Commission and the European Free Trade Associat
38、ion and within its scope the standard covers all relevant essential requirements as given in EC Directive 2006/42/EC (Machinery Directive). Compliance with this standard provides one means of conformity with the specified essential requirements of the Directive concerned. WARNING: Other requirements
39、 and other EC Directives may be applicable to the products falling within the scope of this standard. BS EN 61029-2-5:2011+A11:2015EN 61029-2-5:2011+A11:2015 5 4 Contents 1 Scope . 52 Definitions 53 General requirement . 54 General notes on tests 55 Rating . 56 Classification 57 Marking and informat
40、ion for use 68 Protection against electric shock . 79 Starting . 710 Input and current 711 Heating . 712 Leakage current 713 Environmental requirements . 714 Protection against ingress of foreign bodies and moisture resistance . 815 Insulation resistance and electric strength . 816 Endurance 817 Abn
41、ormal operation. 818 Stability and mechanical hazards 819 Mechanical strength 1120 Construction . 1121 Internal wiring . 1222 Components . 1223 Supply connection and external flexible cables and cords 1224 Terminals for external conductor . 1225 Provision for earthling . 1326 Screws and connections
42、. 1327 Creepage distances, clearances and distances through insulation . 1328 Resistance to heat, fire and tracking . 1329 Resistance to rusting 1330 Radiation 13Annex A (normative) Normative references . 18Annex ZD (informative) Dust measurement 19 BS EN 61029-2-5:2011+A11:2015EN 61029-2-5:2011+A11
43、:2015 6 7777777101010101013131414141415151515151520 5 1 Scope This clause of Part 1 is applicable except as follows: 1.1 Addition: This European Standard applies to transportable band saws having a saw band not more than 2 700 mm in length and band wheels having a diameter of not more than 350 mm. 1
44、.2 Addition: Band saws other than transportable band saws are covered by EN 1807. 2 Definitions This clause of Part 1 is applicable except as follows: 2.21 Replacement: 2.21 normal load load to obtain rated input 2.Z101 band saw tool designed to cut wood or other materials by means of a revolving en
45、dless saw band which is carried on two or more band wheels. It has a fixed or inclinable table to support and position the work piece that is fed by hand against the saw band 3 General requirement This clause of Part 1 is applicable. 4 General notes on tests This clause of Part 1 is applicable. 5 Ra
46、ting This clause of Part 1 is applicable. 6 Classification This clause of Part 1 is applicable. Text deleted 5 1 Scope This clause of Part 1 is applicable except as follows: 1.1 Addition: This European Standard applies to transportable band saws having a saw band not more than 2 700 mm in length and
47、 band wheels having a diameter of not more than 350 mm. 1.2 Addition: Band saws other than transportable band saws are covered by EN 1807. 2 Definitions This clause of Part 1 is applicable except as follows: 2.21 Replacement: 2.21 normal load load to obtain rated input 2.Z101 band saw tool designed
48、to cut wood or other materials by means of a revolving endless saw band which is carried on two or more band wheels. It has a fixed or inclinable table to support and position the work piece that is fed by hand against the saw band 3 General requirement This clause of Part 1 is applicable. 4 General
49、 notes on tests This clause of Part 1 is applicable. 5 Rating This clause of Part 1 is applicable. 6 Classification This clause of Part 1 is applicable. Text deleted BS EN 61029-2-5:2011+A11:2015EN 61029-2-5:2011+A11:2015 7 tool designed to cut wood and analogous materials, plastics and nonferrous metals except magnesium, by means of a revolving en
