EN 61076-4-103-1999 en Connectors for Use in d c Low-Frequency Analogue and Digital High Speed Data Applications Part 4-103 Printed Board Connectors with Assesed Quality - Detail S.pdf

相关资源

IRS 70778-2-2018 Recommendations for determining the carrying capacity and fatigue risks of existing metallic railway bridges.pdf

IRS 70712-2018 Rail defects.pdf

IRS 50596-6-2018 Conditions for coding intermodal loading units in combined transport combined transport lines and wagons.pdf

IRS 50596-5-2018 Transport of road vehicles on wagons-Technical Organisation-Conveyance of semi-trailers with P coding or N coding on recess wagons.pdf

IESNA TM-23-2017 Lighting Control Protocols.pdf

IESNA RP-2-2017 Recommended Practice for Retail Lighting.pdf

ITU-R RAPPORT M 766-2 FRENCH-1990 Feasibility of frequency sharing between the GPS and other services《全球定位系统和其他服务之间的频率共享的可行性》.pdf

ITU-R RAPPORT M 763-3 FRENCH-1990 Signal level variation due to multipath effects and blockage by ship-s superstructure in maritime mobile-satellite service lin.pdf

ITU-R RAPPORT M 739-1 FRENCH-1986 Interference due to intermodulation products in the land mobile service between 25 and 100 MHz《由于互调产物在陆地移动服务25和100 MHz之间产生的干扰》.pdf

ITU-R RAPPORT M 319-7 FRENCH-1990 Characteristics of equipment and principles governing the assignment of frequency channels between 25 and 100 MHz for land mob.pdf

猜你喜欢

ASTM F2380-2004 Standard Test Method for Performance of Conveyor Toasters《传送带式烤炉的性能的标准试验方法》.pdf

ASTM F2380-2004(2010) Standard Test Method for Performance of Conveyor Toasters《传送带式烤炉的性能的标准试验方法》.pdf

ASTM F2380-2004(2016) Standard Test Method for Performance of Conveyor Toasters《传送带式烤炉性能的标准试验方法》.pdf

ASTM F2380-2018 Standard Test Method for Performance of Conveyor Toasters《输送机烤面包机性能的标准试验方法》.pdf

ASTM F2381-2004 Standard Test Method for Evaluating Trans-Vinylene Yield in Irradiated Ultra-High-Molecular-Weight Polyethylene Fabricated Forms Intended for Surgical Implants by I.pdf

ASTM F2381-2010 Standard Test Method for Evaluating Trans-Vinylene Yield in Irradiated Ultra-High-Molecular-Weight Polyethylene Fabricated Forms Intended for Surgical Implants by I.pdf

ASTM F2382-2004(2010) Standard Test Method for Assessment of Intravascular Medical Device Materials on Partial Thromboplastin Time (PTT)《根据部分促凝血酶原激酶时间评估血管内医疗设备材料的标准试验方法》.pdf

ASTM F2382-2004e1 Standard Test Method for Assessment of Intravascular Medical Device Materials on Partial Thromboplastin Time (PTT)《根据部分促凝血酶原激酶时间评估血管内医疗设备材料的标准试验方法》.pdf

ASTM F2382-2017 Standard Test Method for Assessment of Circulating Blood-Contacting Medical Device Materials on Partial Thromboplastin Time (PTT)《评定部分凝血活酶时间(PTT)内循环血液接触医疗器械材料的标准试验方.pdf