1、BSI Standards PublicationRadio-frequency connectorsPart 26: Sectional specification for TNCA series RF coaxial connectorsBS EN 61169-26:2013National forewordThis British Standard is the UK implementation of EN 61169-26:2013. It isidentical to IEC 61169-26:2013.Attention is drawn to the TNCA series c
2、onnector mating limitation defined inthe Scope, where the dielectric of the TNCA extends beyond the referenceplane.Users may also wish to consider a method of distinguishing a TNCA interfacefrom that of a TNCA series connector conforming to EN 61169-17.The UK participation in its preparation was ent
3、rusted to Technical CommitteeEPL/46, Cables, wires and waveguides, radio frequency connectors and acces-sories for communication and signalling.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necess
4、ary provisions of acontract. Users are responsible for its correct application. The British Standards Institution 2013.Published by BSI Standards Limited 2013ISBN 978 0 580 74605 5ICS 31.220.10 Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was
5、published under the authority of the StandardsPolicy and Strategy Committee on 31 July 2013.Amendments issued since publicationAmd. No. Date Text affectedBRITISH STANDARDBS EN 61169-26:2013EUROPEAN STANDARD EN 61169-26 NORME EUROPENNE EUROPISCHE NORM April 2013 CENELEC European Committee for Electro
6、technical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Management Centre: Avenue Marnix 17, B - 1000 Brussels 2013 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN
7、 61169-26:2013 E ICS 31.220.10 English version Radio-frequency connectors - Part 26: Sectional specification for TNCA series RF coaxial connectors (IEC 61169-26:2013) Connecteurs pour frquences radiolectriques - Partie 26: Spcification intermdiaire pour les connecteurs coaxiaux RF srie TNCA (CEI 611
8、69-26:2013) Hochfrequenz-Steckverbinder - Teil 26: Rahmenspezifikation fr koaxiale HF-Steckverbinder der TNCA-Serie (IEC 61169-26:2013) This European Standard was approved by CENELEC on 2013-03-05. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the cond
9、itions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard e
10、xists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the n
11、ational electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,
12、Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 61169-26:2013EN 61169-26:2013 - 2 - Foreword The text of document 46F/220/FDIS, future edition 1 of IEC 61169-26, prepared by SC 46F, R.F. and microwave passive components, of IEC TC 46, Cables, w
13、ires, waveguides, R.F. connectors, R.F. and microwave passive components and accessories was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61169-26:2013. The following dates are fixed: latest date by which the document has to be implemented at national level by publication
14、 of an identical national standard or by endorsement (dop) 2013-12-05 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2016-03-05 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights.
15、CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 61169-26:2013 was approved by CENELEC as a European Standard without any modification. BS EN 61169-26:2013- 3 - EN 61169-26:2013 Annex ZA (nor
16、mative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For und
17、ated references, the latest edition of the referenced document (including any amendments) applies. NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 60068-1 - Environmental testing -
18、 Part 1: General and guidance EN 60068-1 - IEC 61169-1 + A1 + A2 1992 1996 1997 Radio-frequency connectors - Part 1: Generic specification - General requirements and measuring methods EN 61169-1 + A1 + A2 1994 1996 1997 BS EN 61169-26:2013 2 61169-26 IEC:2013 CONTENTS 1 Scope . 6 2 Normative referen
19、ce . 6 3 Mating face and gauge information . 6 Dimensions General connectors Grade 1 . 6 3.1Connector with pin-centre contact (see Figure 1) . 6 3.1.1Connector with socket-centre contact (see Figure 2) . 8 3.1.2Gauges . 9 3.2Gauge pins for socket-centre contact (see Figure 3) 9 3.2.1Test procedure 9
20、 3.2.2Dimensions Standard test connectors Grade 0 10 3.3Connector with pin-centre contact (see Figure 4) . 10 3.3.1Connector with socket-centre contact (see Figure 5) . 11 3.3.24 Quality assessment procedure 12 General . 12 4.1Rating and characteristics (see Clause 6 of IEC 61169-1:1992) 12 4.2Test
21、schedule and inspection requirements Acceptance tests . 15 4.3Acceptance tests (see Table 8) 15 4.3.1Periodic tests. 16 4.3.2Procedures 18 4.4Quality conformance inspection . 18 4.4.1Qualification approval and its maintenance 18 4.4.25 Instructions for preparation of detail specifications . 19 Gener
22、al . 19 5.1Identification of the component 19 5.2Performance 19 5.3Marking, ordering information and related matters . 19 5.4Selection of tests, test conditions and severities 19 5.5Blank detail specification pro-forma for type TNCA connector 21 5.6Bibliography 26 Figure 1 Connector with pin-centre
23、contact (for dimensions and key, see Table 1) 7 Figure 2 Connector with socket-centre contact (for dimensions and key, see Table 2) 8 Figure 3 Gauge pins for socket-centre contact (for dimensions, see Table 3) 9 Figure 4 Connector with pin-centre contact (for dimensions and key, see Table 4) 10 Figu
24、re 5 Connector with socket-centre contact (for dimensions and key, see Table 5) 11 Table 1 Dimensions of connector with pin-centre contact . 7 Table 2 Dimensions of connector with socket-centre contact 8 Table 3 Dimensions of gauge pins for socket-centre contact 9 Table 4 Dimensions of connector wit
25、h pin-centre contact . 10 Table 5 Dimensions of connector with socket-centre contact 11 Table 6 Preferred climatic categories (see IEC 60068-1) 12 Table 7 Ratings and characteristics . 13 BS EN 61169-26:201361169-26 IEC:2013 3 Table 8 Acceptance tests . 15 Table 9 Periodic tests 16 BS EN 61169-26:20
26、13 6 61169-26 IEC:2013 RADIO-FREQUENCY CONNECTORS Part 26: Sectional specification for TNCA series RF coaxial connectors 1 Scope This part of IEC 61169 which is a sectional specification (SS) provides information and rules for the preparation of detail specifications (DS) for TNCA series RF coaxial
27、connectors, with characteristic impedance of 50 , with threaded coupling and operating frequency limit up to 18 GHz, used in wireless, communication, instrument, antenna, test and measurements, radar, and other fields, connecting with RF cables or micro-strips. It also prescribes mating face dimensi
28、ons for general connectors-grade 2, dimensional details of standard test connectors-grade 0, gauging information and tests selected from IEC 61169-1, applicable to all detail specifications relating to TNCA series connectors. This specification indicates the recommended performance characteristics t
29、o be considered when writing a detail specification and it covers test schedules and inspection requirements for assessment levels M and H (see Tables 8 and 9). TNCA connectors are recommended for applications above 11 GHz. TNCA connectors are compatible with TNC connectors as described in the IEC 6
30、0169-17 and IEC 60169-26 provided that the dielectric of connector with socket-centre contact does not extend beyond reference plane. However when mated with these connectors, the performances are not ensured. NOTE Attention is drawn to the fact that TNCA interface does not utilize overlapping PTFE
31、dielectric for increased voltage breakdown resistance. 2 Normative reference The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest e
32、dition of the referenced document (including any amendments) applies. IEC 61169-1:1992, Radio-frequency connectors Part 1: Generic specification General requirements and measuring methods1Amendment 1:1996 Amendment 2:1997 IEC 60068-1, Environmental testing Part 1: General and guidance 3 Mating face
33、and gauge information Dimensions General connectors Grade 1 3.1Connector with pin-centre contact (see Figure 1) 3.1.1Metric dimensions are original dimensions. _ 1There exists a consolidated edition 1.2 (1998) that comprises IEC 61169-1:1992, its Amendment 1:1996 and its Amendment 2:1997. BS EN 6116
34、9-26:201361169-26 IEC:2013 7 All undimensioned pictorial configurations are for reference purpose only. Note 2 Reference plane Detail for pin contact abcsrd(2) p h n Full theard g e f Reference plane Sealing gasket to meet required functional and environmental performance ad k 55 66 1 4 7/16-28UNEF-
35、2B(1) m IEC 269/13 Figure 1 Connector with pin-centre contact (for dimensions and key, see Table 1) Table 1 Dimensions of connector with pin-centre contact Ref. mm inch Additional notes Min. Max. Min. Max. a 11,18 - 0,440 - b 7,98 8,08 0,314 0,318 c 6,05 6,15 0,238 0,242 d 1,32 1,37 0,052 0,054 e 5,
36、28 - 0,208 - f 5,38 - 0,212 - g 5,28 - 0,208 - h 0,08 - 0,003 - k 1,98 - 0,078 - m - 1,98 - 0,078 (1) n 1,60 - 0,063 - p 3,96 - 0,156 - r - 0,64 - 0,025 s - 8,18 - 0,322 ad 3,66 3,98 0,144 0,157 (1) This dimension shows the position with nut biased fully forward. (2) Three holes 0,69 mm (0,027 inch)
37、 minimum diameter equally spaced for safety wiring when required. Location of holes on coupling nut is optional and consistent with electrical/mechanical performance. BS EN 61169-26:2013 8 61169-26 IEC:2013 Connector with socket-centre contact (see Figure 2) 3.1.2ap Reference plane bcdemj k s f g h
38、r I t v(2)u (1)Detail for socket contact Chamfer or radius 7/16-28UNEF-2AIEC 270/13 Figure 2 Connector with socket-centre contact (for dimensions and key, see Table 2) Table 2 Dimensions of connector with socket-centre contact Ref. mm inch Additional notes Min. Max. Min. Max. a 9,60 9,68 0,378 0,381
39、 b 8,79 9,04 0,346 0,356 c 8,31 8,46 0,327 0,333 d 8,10 8,15 0,319 0,321 e 4,62 4,72 0,182 0,186 f 1,73 2,24 0,068 0,088 g 8,31 8,51 0,327 0,335 h 4,75 - 0,187 - j 5,03 5,28 0,198 0,208 k - 0,15 - 0,006 l 4,95 - 0,195 - m 2,13 2,21 0,084 0,087 p 5,03 5,28 0,198 0,208 r 10,52 - 0,414 - s 0,38 0,76 0,
40、015 0,030 t 4,57 4,98 0,180 0,196 u - 2,34 - 0,092 (1) v (2) (1) Diameter u is the ID of dielectric based on the assumption that the dielectric used has a dielectric constant of 2,02. (2) Design for slotting is optional. It is chosen to meet electrical and mechanical requirements, when mated with a
41、1,32 mm (0,052 in) 1,37 mm (0,054 in) diameter pin. BS EN 61169-26:201361169-26 IEC:2013 9 Gauges 3.2Gauge pins for socket-centre contact (see Figure 3) 3.2.1a0,2 max.R0,4 max. 50 10 b IEC 271/13 Figure 3 Gauge pins for socket-centre contact (for dimensions, see Table 3) Table 3 Dimensions of gauge
42、pins for socket-centre contact Gauge A Maximum material for sizing purpose Gauge B Minimum material for measurement of retention force Mass of gauge 60 g 2 g mm in mm in Min. Max. Min. Max. Min. Max. Min. Max. a 1,450 1,455 0,057 1 0,057 3 1,315 1,320 0,051 8 0,052 0 b 3,18 3,50 0,125 2 0,137 8 3,18
43、 3,50 0,125 2 0,137 8 Material: steel, polished. Surface roughness: Ra 0,4 m on the cylindrical surface of length b and R0,4. Test procedure 3.2.2The gauge A shall be inserted into the socket-centre contact one time with a minimum depth of 3,18 mm. This is a sizing operation and should only be carri
44、ed out when the socket-centre contact is removed from the connector. After this, the gauge B shall be inserted into the socket-centre contact. The contact shall retain the mass of the gauge in a vertical downward position. The test shall be carried out on connector when the socket-centre contact is
45、not removed. BS EN 61169-26:2013 10 61169-26 IEC:2013 Dimensions Standard test connectors Grade 0 3.3Connector with pin-centre contact (see Figure 4) 3.3.1REF Plane Detail for pin contact abcsrdp h n Full theard g e Reference plane ad k 55 66 7/16-28UNEF-2B(1) m 1 4 Reference plane 0,80,8 0,8 C f 0,
46、013 mm 0,0005 in C 0,013 mm 0,0005 in 0,05 mm 0,002 in C 0,08 mm 0,003 in C IEC 272/13 Figure 4 Connector with pin-centre contact (for dimensions and key, see Table 4) Table 4 Dimensions of connector with pin-centre contact Ref. mm inch Additional notes Min. Max. Min. Max. a 11,18 - 0,440 - b 8,06 8
47、,08 0,317 3 0,318 1 c 6,07 6,12 0,239 0,241 d 1,34 1,37 0,053 0,054 e 5,28 - 0,208 - f 5,38 - 0,212 - g 5,28 - 0,208 - h 0,08 1,02 0,003 0,040 k 1,98 - 0,078 - m - 1,98 - 0,078 (1) n 1,60 - 0,063 - p 3,96 - 0,156 - r - 0,64 - 0,025 s - 8,18 - 0,322 ad 3,66 3,98 0,144 0,157 (1) This dimension shows t
48、he position with nut biased fully forward. BS EN 61169-26:201361169-26 IEC:2013 11 Connector with socket-centre contact (see Figure 5) 3.3.2k(NOTE 1)pj7/16-28UNEF-2Agrcabedu(NOTE 2)sf hEv(NOTE 3 )lm0.1 0.23mm 45tCHAMFER OR RADIUSREF PLANE0.0005 in0.013 mm0.013 mm0.0005 inE0.10 mm0.004 inE0.10 mm0.00
49、4 inEDetail for socket contact0,013 mm0,0005 in0,013 mm0,0005 in0,10 mm 0,004 in E ap Reference plane bcdemj k (1) s f g hr I v (3)u (2) Detail for socket contact Chamfer or radius 7/16-28UNEF-2A0,10 mm 0,004 in E 0,1 0,23 mm 45 IEC 273/13 Figure 5 Connector with socket-centre contact (for dimensions and key, see Table 5) Table 5 Dimensions o
