EN 61169-40-2011 en Radio-frequency connectors - Part 40 Sectional specification for 2 4 series RF connectors《射频连接器 第40部分 2 4系列射频连接器分规范》.pdf

上传人:lawfemale396 文档编号:719672 上传时间:2019-01-04 格式:PDF 页数:28 大小:1.44MB
下载 相关 举报
EN 61169-40-2011 en Radio-frequency connectors - Part 40 Sectional specification for 2 4 series RF connectors《射频连接器 第40部分 2 4系列射频连接器分规范》.pdf_第1页
第1页 / 共28页
EN 61169-40-2011 en Radio-frequency connectors - Part 40 Sectional specification for 2 4 series RF connectors《射频连接器 第40部分 2 4系列射频连接器分规范》.pdf_第2页
第2页 / 共28页
EN 61169-40-2011 en Radio-frequency connectors - Part 40 Sectional specification for 2 4 series RF connectors《射频连接器 第40部分 2 4系列射频连接器分规范》.pdf_第3页
第3页 / 共28页
EN 61169-40-2011 en Radio-frequency connectors - Part 40 Sectional specification for 2 4 series RF connectors《射频连接器 第40部分 2 4系列射频连接器分规范》.pdf_第4页
第4页 / 共28页
EN 61169-40-2011 en Radio-frequency connectors - Part 40 Sectional specification for 2 4 series RF connectors《射频连接器 第40部分 2 4系列射频连接器分规范》.pdf_第5页
第5页 / 共28页
点击查看更多>>
资源描述

1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationRadio-frequency connectorsPart 40: Sectional specification for 2.4 series RF connectorsBS EN 61169-40:2011National forewordThis British Standard is the UK implementation of EN 61

2、169-40:2011. It is identical to IEC 61169-40:2010. It supersedes DD IEC/PAS 61169-40:2008, which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee EPL/46, Cables, wires and waveguides, radio frequency connectors and accessories for communication and signalling

3、.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. BSI 2011ISBN 978 0 580 62180 2 ICS 33.120.30Compliance with a

4、 British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 July 2011.Amendments issued since publicationAmd. No. Date Text affectedBRITISH STANDARDBS EN 61169-40:2011EUROPEAN STANDARD EN

5、 61169-40 NORME EUROPENNE EUROPISCHE NORM May 2011 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Management Centre: Avenue Marnix 17, B - 1000 Brussels 2011 CENELEC - All rights of expl

6、oitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 61169-40:2011 E ICS 33.120.30 English version Radio-frequency connectors - Part 40: Sectional specification for 2.4 series RF connectors (IEC 61169-40:2010) Connecteurs pour frquences radiolectriques - Partie 4

7、0: Spcification intermdiaire pour les connecteurs RF srie 2.4 (CEI 61169-40:2010) Hochfrequenz-Steckverbinder -Teil 40: Rahmenspezifikation fr HF-Steckverbinder der Serie 2.4 (IEC 61169-40:2010) This European Standard was approved by CENELEC on 2011-01-03. CENELEC members are bound to comply with th

8、e CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat o

9、r to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the offic

10、ial versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland,

11、Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 61169-40:2011EN 61169-40:2011 Foreword The text of document 46F/167/CDV, future edition 1 of IEC 61169-40, prepared by SC 46F, R.F. and microwave passive components, of IEC TC 46, Cables, wires, waveguide

12、s, R.F. connectors, R.F. and microwave passive components and accessories, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 61169-40 on 2011-01-03. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CE

13、N and CENELEC shall not be held responsible for identifying any or all such patent rights. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2011-10-03 latest date by which the

14、national standards conflicting with the EN have to be withdrawn (dow) 2014-01-03 Annex ZA has been added by CENELEC. _ Endorsement notice The text of the International Standard IEC 61169-40:2010 was approved by CENELEC as a European Standard without any modification. In the official version, for Bib

15、liography, the following note has to be added for the standard indicated: IEC 61169-32 NOTE Harmonized as EN 61169-32. _ BS EN 61169-40:2011EN 61169-40:2011 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following referenced

16、 documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE When an international publication has been modified by common modifi

17、cations, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HDYearIEC 60068-1 - Environmental testing - Part 1: General and guidance EN 60068-1 - IEC 61169-1 + A1 + A2 1992 1996 1997 Radio-frequency connectors - Part 1: Generic specification - General requirements and measurin

18、g methods EN 61169-1 + A1 + A2 1994 1996 1997 BS EN 61169-40:201161169-40 IEC:2010 CONTENTS 1 Scope .6 2 Normative references .6 3 Mating face and gauge information 7 3.1 Dimensions High performance connectors Grade 1. .7 3.1.1 Connector with pin-centre contact . .7 3.1.2 Connector with socket-centr

19、e contact . .8 3.2 Gauges . .9 3.2.1 Gauge pins for socket-centre contact9 3.2.2 Test procedure. 9 3.3 Dimensions Standard test connectors Grade 0 . 10 3.3.1 Connector with pin-centre contact 10 3.3.2 Connector with socket-centre contact . .11 4 Quality assessment procedure 12 4.1 General . .12 4.2

20、Rating and characteristics (see Clause 6 of IEC 61169-1) .12 4.3 Test schedule and inspection requirements 15 4.3.1 Acceptance tests . .15 4.3.2 Periodic tests . 15 4.4 Procedures. .17 4.4.1 Quality conformance inspection. .17 4.4.2 Qualification approval and its maintenance . 17 5 Instructions for

21、preparation of detail specifications . 17 5.1 General . .17 5.2 Identification of the detail specification17 5.3 Identification of the component . .17 5.4 Performance. .18 5.5 Marking, ordering information and related matters . .18 5.6 Selection of tests, test conditions and severities18 6 Blank det

22、ail specification pro-forma for 2.4 connectors .19 Bibliography . 24 Figure 1 Connector with pin-centre contact (for dimensions and notes, see Table 1) .7 Figure 2 Connector with socket-centre contact (for dimensions and notes, see Table 2). 8 Figure 3 Gauge pins for socket-centre contact (for dimen

23、sions and notes, see Table 3). 9 Figure 4 Connector with pin-centre contact (for dimensions and notes, see Table 4) . .10 Figure 5 Connector with socket-centre contact (for dimensions and notes, see Table 5). 11 BS EN 61169-40:201161169-40 IEC:2010 Table 1 Dimensions of connector with pin-centre con

24、tact .7 Table 2 Dimensions of connector with socket-centre contact .8 Table 3 Dimensions of gauge pins for socket-centre contact . 9 Table 4 Dimensions of connector with pin-centre contact . .10 Table 5 Dimensions of connector with socket-centre contact .11 Table 6 Preferred climatic categories (see

25、 IEC 60068-1)12 Table 7 Rating and characteristics. 13 Table 8 Acceptance tests . .15 Table 9 Periodic tests 15 BS EN 61169-40:2011 6 61169-40 IEC:2010 RADIO-FREQUENCY CONNECTORS Part 40: Sectional specification for 2.4 series RF connectors 1 Scope This part of IEC 61169 provides information and rul

26、es for preparation of detail specification of 2.4 series R.F connectors together with the pro-forma blank detail specification. The 2.4 series thread mated connectors with characteristic impedance 50 are used formillimeter wave applications, connecting with RF cables or microstrips. The operatingfre

27、quency limit is up to 50 GHz. These connectors can be intermated with 1,85 mm (IEC 61169-32 and IEEE 287-2007)connectors. It also prescribes mating face dimensions for high performance connectors grade 1,dimensional detail of standard test connectors grade 0, gauging information and testsselected fr

28、om IEC 61169-1 applicable to all detail specifications relating to 2.4 series RF connectors. This specification indicates recommended performance characteristics to be considered whenwriting a detail specification and it covers test schedules and inspection requirements forassessment levels M and H.

29、 NOTE Metric dimension are original dimensions. All undimensioned pictorial configurations are for reference purpose only. 2 Normative references The following referenced documents are indispensable for the application of this document.For dated references, only the edition cited applies. For undate

30、d references, the latest editionof the referenced document (including any amendments) applies. IEC 61169-1:1992, Radio-frequency connectors Part 1: Generic specification Generalrequirements and measuring methods1Amendment 1 (1996) Amendment 2 (1997) IEC 60068-1, Environmental testing Part 1: General

31、 and guidance _ 1There exists a consolidated edition 1.2 (1998) that comprises IEC 61169-1:1992, its Amendment 1:1996 andits Amendment 2:1997. BS EN 61169-40:201161169-40 IEC:2010 7 3 Mating face and gauge information 3.1 3.1.1 Dimensions High performance connectors Grade 1 Connector with pin-centre

32、 contact e 45 5 b a q c d R fj hnmlrgkpSee detail A Note 1Note 2 Gasket Detail A IEC 2543/10 Figure 1 Connector with pin-centre contact (for dimensions and notes, see Table 1) Table 1 Dimensions of connector with pin-centre contact mm Ref. Min. Max. Notes a 1,850 2,450 b 4,340 4,660 c 0,000 0,076 d

33、3,380 3,480 e 0,200 0,400 f 0,050 g 56 64 h 1,029 1,054 j 1,270 1,524 k 0,200 0,300 l 7,010 7,110 m 4,725 4,750 n 2,387 5 2,412 5 p 0,506 0,523 q 0,510 0,770 r M70,75-6H NOTE 1 Mechanical and electrical reference plane. NOTE 2 Gasket possible on grade 1 connectors. BS EN 61169-40:2011 8 61169-40 IEC

34、:2010 3.1.2 Connector with socket-centre contact j 45 5 b a l c d R gmepkfSee detail A Note 1 Note 2Detail A n h 45 5Note3IEC 2544/10 Figure 2 Connector with socket-centre contact (for dimensions and notes, see Table 2) Table 2 Dimensions of connector with socket-centre contact mm Notes Ref. Min. Ma

35、x. a 4,800 5,060 b 1,370 1,630 c 2,650 d 0,000 0,076 e 4,770 4,795 f 2,387 5 2,412 5 g 0,130 h 0,100 0,127 j 0,100 0,200 k 1,029 1,054 l 6,000 m 5,790 5,890 n 3,000 3,100 p M70,75-6g NOTE 1 Mechanical and electrical reference plane. NOTE 2 Design for root cut to be allowed. NOTE 3 Design for slottin

36、g is optional, and should meet electrical andmechanical requirements, when mating with 0,506 mm 0,523 mm gauge pin. BS EN 61169-40:201161169-40 IEC:2010 9 3.2 3.2.1 Gauges Gauge pins for socket-centre contact 50 2 ab0,2 maxR 0,4 maxIEC 2545/10 Figure 3 Gauge pins for socket-centre contact (for dimen

37、sions and notes, see Table 3) Table 3 Dimensions of gauge pins for socket-centre contact Gauge A Maximum material for sizing purposes Gauge B Minimum material for measurement of retention force Mass of gauge: 26 g 1 g mm mm Ref. Min. Max. Min. Max. a 0,516 0,518 5 0,503 5 0,506 0 b 1,50 2,00 1,50 2,

38、00 Material: steel, polished, surface roughness: Ra=0,4 m maximum. 3.2.2 Test procedure The gauge A shall be inserted into the socket-centre contact one time with a minimum depthof 0,68 mm. This is a sizing operation and should only be carried out when the socket-centrecontact is removed from the co

39、nnector. After this, the gauge B shall be inserted into socket-centre contact. The contact shall retainthe mass of the gauge in a vertical downward position. BS EN 61169-40:2011 10 61169-40 IEC:2010 3.3 3.3.1 Dimensions Standard test connectors Grade 0 Connector with pin-centre contact e 45 5 b a q

40、c d R fj nmlrgkpSee detail A 0,4 Detail A h0,40,013 A B B AA B C C 0,013 0,025 0,025Note IEC 2546/10 Figure 4 Connector with pin-centre contact (for dimensions and notes, see Table 4) Table 4 Dimensions of connector with pin-centre contact Ref. mm Notes Min. Max. a 1,850 2,450 b 4,370 4,630 c 0,000

41、0,020 d 3,380 3,480 e 0,250 0,360 f 0,050 g 56 64 h 1,038 3 1,046 3 j 1,335 1,445 k 0,200 0,300 l 7,010 7,110 m 4,725 4,750 n 2,395 2,405 p 0,506 0,516 q 0,510 0,770 r M70,75-6H NOTE Mechanical and electrical reference plane. BS EN 61169-40:201161169-40 IEC:2010 11 3.3.2 Connector with socket-centre

42、 contact h 45 5 b a l c d mkfNote 1 Detail A 0,40,013 A B B A 0,013 0,025 n See detail A Note 2 R g Note3epj 45 5 A 0,025 ABIEC 2547/10 Figure 5 Connector with socket-centre contact (for dimensions and notes, see Table 5) Table 5 Dimensions of connector with socket-centre contact mm Ref. Min. Max. N

43、otes a 4,800 5,060 b 1,370 1,630 c 2,650 d 0,000 0,020 e 4,770 4,795 f 2,395 2,405 g 0,130 h 0,100 0,130 j 0,100 0,200 k 1,038 3 1,046 3 l 6,000 m 5,790 5,890 n 3,000 3,100 p M70,75-6g NOTE 1 Mechanical and electrical reference plane. NOTE 2 Design for root cut to be allowed. NOTE 3 Design for slott

44、ing is optional, and should meet electrical andmechanical requirements, when mating with 0,506 mm 0,516 mm gauge pin. BS EN 61169-40:2011 12 61169-40 IEC:2010 4 Quality assessment procedure 4.1 4.2 General The following subclauses provide recommended rating, performance and test conditions to becons

45、idered when writing a detail specification. They also provide an appropriate schedule oftests with minimum levels of conformance inspection sampling, together with the pro-formablank detail specification (BDS) and instructions for the preparation of a detail specification. Rating and characteristics

46、 (see Clause 6 of IEC 61169-1) The values indicated below (Table7) are recommended for 2.4 series RF connectors and aregiven for the writer of the detail specification. They are applicable for the condition when theconnectors are fully mated. Certain tests are listed without any recommended values b

47、eing given. These tests will usuallynot be required. When these tests are required, appropriate values shall be entered in thedetail specification at the discretion of the specification writer. Preferred climatic categories are given in Table 6. Table 6 Preferred climatic categories (see IEC 60068-1

48、) Category designation Letter* Temperature range Damp heat steady state 40/85/21 A 40 C to +85 C 21 days 55/155/56 B 55 C to +155 C 56 days * To be included in the IEC type designation. BS EN 61169-40:201161169-40 IEC:2010 13 Table 7 Rating and characteristics Rating and characteristics Test method IEC 61169-1 Subclause Values Remarks deviationsfrom standard test method Electrical Nominal impedance 50 Frequency range Grade1 connectors - flexible cable, straight styles - semi-rigid cable, straight styles - right-angle styles hDC 50 GHz Or upper fr

展开阅读全文
相关资源
猜你喜欢
相关搜索

当前位置:首页 > 标准规范 > 国际标准 > 其他

copyright@ 2008-2019 麦多课文库(www.mydoc123.com)网站版权所有
备案/许可证编号:苏ICP备17064731号-1