1、Radio-frequency connectorsPart 59: Sectional specification for type L32-4 and L32-5 threaded multi-pin radio-frequency connectors (IEC 61169-59:2017)BS EN 61169-59:2017BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06EUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 6
2、1169-59September 2017ICS 33.120.30English VersionRadio-frequency connectors -Part 59: Sectional specification fortype L32-4 and L32-5 threaded multi-pin radio-frequencyconnectors(IEC 61169-59:2017)Connecteurs pour frquences radiolectriques Partie 59:Spcification intermdiaire relative aux connecteurs
3、 pourfrquences radiolectriques multicoaxiaux filets L32-4 and L32-5(IEC 61169-59:2017)Hochfrequenzsteckverbinder - Teil 59: Rahmenspezifikation fr mehrpolige Hochfrequenzsteckverbinder mit Gewinde Typ L32-4 und L32-5(IEC 61169-59:2017)This European Standard was approved by CENELEC on 2017-06-26. CEN
4、ELEC members are bound to comply with the CEN/CENELECInternal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.Up-to-date lists and bibliographical references concerning such national standards may be obtained on ap
5、plication to the CEN-CENELECManagement Centre or to any CENELEC member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CE
6、NELEC Management Centre has the same status as the official versions.CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic,Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Ice
7、land, Ireland, Italy, Latvia,Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden,Switzerland, Turkey and the United Kingdom.European Committee for Electrotechnical StandardizationComit Europen de Normalisation ElectrotechniqueEu
8、ropisches Komitee fr Elektrotechnische NormungCEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.Ref. No. EN 61169-59:2017 ENational forewordThis British Standard is the UK imple
9、mentation of EN 61169-59:2017. It is identical to IEC 61169-59:2017.The UK participation in its preparation was entrusted to Technical Committee EPL/46, Cables, wires and waveguides, radio frequency connectors and accessories for communication and signalling.A list of organizations represented on th
10、is committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2017 Published by BSI Standards Limited 2017ISBN 978 0 580 91206 1ICS
11、 33.120.30Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 October 2017.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 6
12、116959:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 61169-59 September 2017 ICS 33.120.30 English Version Radio-frequency connectors -Part 59: Sectional specification for type L32-4 and L32-5 threaded multi-pin radio-frequency connectors (IEC 61169-59:2017) Connecteurs pour frquences rad
13、iolectriques Partie 59: Spcification intermdiaire relative aux connecteurs pour frquences radiolectriques multicoaxiaux filets L32-4 and L32-5 (IEC 61169-59:2017) Hochfrequenzsteckverbinder - Teil 59: Rahmenspezifikation fr mehrpolige Hochfrequenzsteckverbinder mit Gewinde Typ L32-4 und L32-5 (IEC 6
14、1169-59:2017) This European Standard was approved by CENELEC on 2017-06-26. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bi
15、bliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the
16、responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia,
17、Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committ
18、ee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELE
19、C Members. Ref. No. EN 61169-59:2017 E BS EN 6116959:2017EN 61159-59:2017 2 European foreword The text of document 46F/351/CDV, future edition 1 of IEC 61159-59, prepared by SC 46F “RF and microwave passive components“, of IEC/TC 46 “Cables, wires, waveguides, RF connectors, RF and microwave passive
20、 components and accessories“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61159-59:2017. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2
21、018-03-26 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2020-06-26 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC shall not be held responsible for identifying any or
22、 all such patent rights. Endorsement notice The text of the International Standard IEC 61159-59:2017 was approved by CENELEC as a European Standard without any modification. BS EN 6116959:2017EN 61159-59:2017 2 European foreword The text of document 46F/351/CDV, future edition 1 of IEC 61159-59, pre
23、pared by SC 46F “RF and microwave passive components“, of IEC/TC 46 “Cables, wires, waveguides, RF connectors, RF and microwave passive components and accessories“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61159-59:2017. The following dates are fixed: latest date b
24、y which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2018-03-26 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2020-06-26 Attention is drawn to the possibility that
25、some of the elements of this document may be the subject of patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 61159-59:2017 was approved by CENELEC as a European Standard without any modif
26、ication. EN 61159-59:2017 3 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references
27、, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date informatio
28、n on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 61169-1 2013 Radio-frequency connectors - Part 1: Generic specification - General requirements and measuring methods EN 61169-1 2013 IEC 61726 - Cable asse
29、mblies, cables, connectors and passive microwave components - Screening attenuation measurement by the reverberation chamber method EN 61726 - IEC 62037 series Passive RF and microwave devices, intermodulation level measurement EN 62037 series BS EN 6116959:2017This page deliberately left blankIEC 6
30、1169-59 Edition 1.0 2017-05 INTERNATIONAL STANDARD Radio-frequency connectors Part 59: Sectional specification for type L32-4 and L32-5 threaded multi-pin radio-frequency connectors INTERNATIONAL ELECTROTECHNICAL COMMISSION ICS 33.120.30 ISBN 978-2-8322-4398-5 Registered trademark of the Internation
31、al Electrotechnical Commission Warning! Make sure that you obtained this publication from an authorized distributor. 2 IEC 61169-59:2017 IEC 2017 CONTENTS FOREWORD . 4 1 Scope 6 2 Normative references 6 3 Terms and definitions 6 4 Mating face and gauge information 7 4.1 Dimensions General connectors
32、 Grade 2 7 4.1.1 Connector with pin contact . 7 4.1.2 Connector with socket contact . 9 4.1.3 Mating face of RF channel . 12 4.2 Gauges . 13 4.2.1 Gauge for socket centre contact . 13 4.2.2 Gauge for type L32-5 connector with 5 pin contacts . 14 4.2.3 Gauge for L32-4 connector with 4 pin contacts 15
33、 4.2.4 Gauge for L32-5 connector with 5 socket contacts . 16 4.2.5 Gauge for L32-4 connector with 4 socket contacts . 17 5 Quality assessment procedure . 19 5.1 General . 19 5.2 Rating and characteristics . 19 5.3 Test schedule and inspection requirements. 21 5.3.1 Acceptance tests . 21 5.3.2 Period
34、ic tests . 22 5.4 Procedures for the qualification approval 24 5.4.1 Quality conformance inspection . 24 5.4.2 Qualification approval and its maintenance 24 5.4.3 Periodic tests . 24 5.4.4 Procedures for quality conformance . 24 6 Instructions for preparation of detail specifications 25 6.1 General
35、. 25 6.2 Identification of the component . 25 6.3 Performance . 25 6.4 Marking, ordering information and related matters 25 6.5 Selection of tests, test conditions and severities . 25 6.6 Blank detail specification pro-forma for Type L32-4 and L32-5 threaded multi-pin radio frequency connectors . 26
36、 7 Marking . 31 7.1 Marking of component . 31 7.2 Marking and contents of package 31 Annex A (normative) Isolation test method . 32 A.1 Preparation of test sample 32 A.2 Test procedure 32 Figure 1 L32-5 connector with 5 pin contacts . 7 Figure 2 L32-4 connector with 4 pin contacts . 8 Figure 3 L32-5
37、 connector with 5 socket contacts 9 Figure 4 L32-4 connector with 4 socket contacts 11 Figure 5 Mating face of RF channel . 12 BS EN 6116959:2017 2 IEC 61169-59:2017 IEC 2017 CONTENTS FOREWORD . 4 1 Scope 6 2 Normative references 6 3 Terms and definitions 6 4 Mating face and gauge information 7 4.1
38、Dimensions General connectors Grade 2 7 4.1.1 Connector with pin contact . 7 4.1.2 Connector with socket contact . 9 4.1.3 Mating face of RF channel . 12 4.2 Gauges . 13 4.2.1 Gauge for socket centre contact . 13 4.2.2 Gauge for type L32-5 connector with 5 pin contacts . 14 4.2.3 Gauge for L32-4 con
39、nector with 4 pin contacts 15 4.2.4 Gauge for L32-5 connector with 5 socket contacts . 16 4.2.5 Gauge for L32-4 connector with 4 socket contacts . 17 5 Quality assessment procedure . 19 5.1 General . 19 5.2 Rating and characteristics . 19 5.3 Test schedule and inspection requirements. 21 5.3.1 Accep
40、tance tests . 21 5.3.2 Periodic tests . 22 5.4 Procedures for the qualification approval 24 5.4.1 Quality conformance inspection . 24 5.4.2 Qualification approval and its maintenance 24 5.4.3 Periodic tests . 24 5.4.4 Procedures for quality conformance . 24 6 Instructions for preparation of detail s
41、pecifications 25 6.1 General . 25 6.2 Identification of the component . 25 6.3 Performance . 25 6.4 Marking, ordering information and related matters 25 6.5 Selection of tests, test conditions and severities . 25 6.6 Blank detail specification pro-forma for Type L32-4 and L32-5 threaded multi-pin ra
42、dio frequency connectors . 26 7 Marking . 31 7.1 Marking of component . 31 7.2 Marking and contents of package 31 Annex A (normative) Isolation test method . 32 A.1 Preparation of test sample 32 A.2 Test procedure 32 Figure 1 L32-5 connector with 5 pin contacts . 7 Figure 2 L32-4 connector with 4 pi
43、n contacts . 8 Figure 3 L32-5 connector with 5 socket contacts 9 Figure 4 L32-4 connector with 4 socket contacts 11 Figure 5 Mating face of RF channel . 12 IEC 61169-59:2017 IEC 2017 3 Figure 6 Gauge for socket contact of RF channel . 13 Figure 7 Gauge for L32-5 connector with 5 pin contacts . 14 Fi
44、gure 8 Gauge for L32-4 connector with 4 pin contacts . 15 Figure 9 Gauge for L32-5 connector with 5 socket contacts . 16 Figure 10 Gauge for L32-4 connector with 4 socket contacts . 18 Table 1 Dimensions of L32-5 connector with 5 pin contacts . 8 Table 2 Dimensions of L32-4 connector with 4 pin cont
45、acts . 9 Table 3 Dimensions of L32-5 connector with 5 socket contacts 10 Table 4 Dimensions of L32-4 connector with 4 socket contacts 11 Table 5 Dimensions of the mating face of RF channel 13 Table 6 Dimensions of gauge for socket contact 14 Table 7 Dimensions of gauge L32-5 connector with 5 pin con
46、tacts . 15 Table 8 Dimensions of gauge L32-4 connector with 4 pin contacts . 16 Table 9 Dimensions of gauge for L32-5 connector with 5 socket contacts . 17 Table 10 Dimensions of gauge for L32-4 connector with 4 socket contacts . 18 Table 11 Rating and characteristics . 20 Table 12 Acceptance tests
47、. 22 Table 13 Periodic tests 23 BS EN 6116959:2017 4 IEC 61169-59:2017 IEC 2017 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ RADIO-FREQUENCY CONNECTORS Part 59: Sectional specification for type L32-4 and L32-5 threaded multi-pin radio-frequency connectors FOREWORD 1) The International Electrotechnica
48、l Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this en
49、d and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organiza
