1、Bayonet lampholders (IEC 61184:2017) BS EN 61184:2017BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 61184 September 2017 ICS 29.140.10 Supersedes EN 61184:2008 English Version Bayonet lampholders (IEC 61184:2017)
2、Douilles baonnette (IEC 61184:2017) Bajonett-Lampenfassungen (IEC 61184:2017) This European Standard was approved by CENELEC on 2017-06-26. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a n
3、ational standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German)
4、. A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, B
5、ulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Swed
6、en, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CENELEC All rights of exploit
7、ation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 61184:2017 E National forewordThis British Standard is the UK implementation of EN 61184:2017. It is identical to IEC 61184:2017. It supersedes BS EN 61184:2008+A1:2011, which is withdrawn.The UK participation in
8、its preparation was entrusted to Technical Committee CPL/34/2, Lamp caps and holders.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for it
9、s correct application. The British Standards Institution 2017 Published by BSI Standards Limited 2017ISBN 978 0 580 93420 9ICS 29.140.10Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and
10、 Strategy Committee on 30 November 2017.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 61184:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 61184 September 2017 ICS 29.140.10 Supersedes EN 61184:2008 English Version Bayonet lampholders (IEC 61184:2017
11、) Douilles baonnette (IEC 61184:2017) Bajonett-Lampenfassungen (IEC 61184:2017) This European Standard was approved by CENELEC on 2017-06-26. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a
12、 national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, Germa
13、n). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium,
14、 Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sw
15、eden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CENELEC All rights of explo
16、itation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 61184:2017 E BS EN 61184:2017EN 61184:2017 2 European foreword The text of document 34B/1898/FDIS, future edition 4 of IEC 61184, prepared by SC 34B “Lamp caps and holders” of IEC/TC 34 “Lamps and related equipm
17、ent” was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61184:2017. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2018-03-26 latest date by wh
18、ich the national standards conflicting with the document have to be withdrawn (dow) 2020-06-26 This document supersedes EN 61184:2008. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC shall not be held responsible for ident
19、ifying any or all such patent rights. This document has been prepared under a mandate given to CENELEC by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For the relationship with EU Directive(s) see informative Annex ZZ, which
20、 is an integral part of this document. Endorsement notice The text of the International Standard IEC 61184:2017 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 60
21、061-4 NOTE Harmonized as EN 60061-4. IEC 60064 NOTE Harmonized as EN 60064. IEC 60238 NOTE Harmonized as EN 60238. IEC 60664-4:2005 NOTE Harmonized as EN 60664-4:2005. IEC 60838-1:2016 NOTE Harmonized as EN 60838-1:2017. IEC 61058-1 NOTE Harmonized as EN 61058-1. IEC 61347-1:2015 NOTE Harmonized as
22、EN 61347-1:2015. BS EN 61184:2017EN 61184:2017 2 European foreword The text of document 34B/1898/FDIS, future edition 4 of IEC 61184, prepared by SC 34B “Lamp caps and holders” of IEC/TC 34 “Lamps and related equipment” was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 611
23、84:2017. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2018-03-26 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2
24、020-06-26 This document supersedes EN 61184:2008. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights. This document has been prepared under a mandate
25、 given to CENELEC by the European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). For the relationship with EU Directive(s) see informative Annex ZZ, which is an integral part of this document. Endorsement notice The text of the Internation
26、al Standard IEC 61184:2017 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 60061-4 NOTE Harmonized as EN 60061-4. IEC 60064 NOTE Harmonized as EN 60064. IEC 60238
27、 NOTE Harmonized as EN 60238. IEC 60664-4:2005 NOTE Harmonized as EN 60664-4:2005. IEC 60838-1:2016 NOTE Harmonized as EN 60838-1:2017. IEC 61058-1 NOTE Harmonized as EN 61058-1. IEC 61347-1:2015 NOTE Harmonized as EN 61347-1:2015. EN 61184:2017 3 Annex ZA (normative) Normative references to interna
28、tional publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of
29、the referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is avail
30、able here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 60061-1 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 1: Lamp caps EN 60061-1 - IEC 60061 series Lamp caps and holders together with gauges for the control of interchangeability an
31、d safety EN 60061 series IEC 60061-2 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 2: Lampholders EN 60061-2 - IEC 60061-3 - Lamp caps and holders together with gauges for the control of interchangeability and safety - Part 3: Gauges EN 60061-3
32、- IEC 60068-2-75 2014 Environmental testing - Part 2-75: Tests - Test Eh: Hammer tests EN 60068-2-75 2014 IEC 60112 2003 Method for the determination of the proof and the comparative tracking indices of solid insulating materials EN 60112 2003 + A1 2009 + A1 2009 IEC 60227 series Polyvinyl chloride
33、insulated cables of rated voltages up to and including 450/750 V - series IEC 60245 series Rubber insulated cables - Rated voltages up to and including 450/750 V - series IEC 60399 - Barrel thread for lampholders with shade holder ring EN 60399 - IEC 60417 - Graphical symbols for use on equipment. I
34、ndex, survey and compilation of the single sheets. - - IEC 60432 series Incandescent lamps - Safety specifications EN 60432 series IEC 60529 1989 Degrees of protection provided by enclosures (IP Code) EN 60529 1991 - - + corrigendum May 1993 + A1 1999 + A1 2000 + A2 2013 + A2 2013 IEC 60598-1 - Lumi
35、naires - Part 1: General requirements and tests EN 60598-1 - IEC 60664-1 2007 Insulation coordination for equipment within low-voltage systems - Part 1: Principles, requirements and tests EN 60664-1 2007 IEC 60695-2-11 2014 Fire hazard testing - Part 2-11: Glowing/hot-wire based test methods - Glow-
36、wire flammability test method for end-products (GWEPT) EN 60695-2-11 2014 IEC 60695-11-5 - Fire hazard testing - Part 11-5: Test flames - Needle-flame test method - Apparatus, confirmatory test arrangement and guidance EN 60695-11-5 - BS EN 61184:2017EN 61184:2017 4 ISO 4046-4 2016 Paper, board, pul
37、ps and related terms - Vocabulary - Part 4: Paper and board grades and converted products - - BS EN 61184:2017EN 61184:2017 4 ISO 4046-4 2016 Paper, board, pulps and related terms - Vocabulary - Part 4: Paper and board grades and converted products - - EN 61184:2017 5 Annex ZZ (informative) Relation
38、ship between this European standard and the safety objectives of Directive 2014/35/EU 2014 OJ L96 aimed to be covered This European standard has been prepared under a Commissions standardisation request relating to harmonised standards in the field of the Low Voltage Directive, M/511, to provide one
39、 voluntary means of conforming to safety objectives of Directive 2014/35/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of electrical equipment designed for use within certain v
40、oltage limits 2014 OJ L96. Once this standard is cited in the Official Journal of the European Union under that Directive, compliance with the normative clauses of this standard given in Table ZZ.1 confers, within the limits of the scope of this standard, a presumption of conformity with the corresp
41、onding safety objectives of that Directive, and associated EFTA regulations. Table ZZ.1 Correspondence between this European standard and Annex I of Directive 2014/35/EU 2014 OJ L96 Safety objectives of Directive 2014/35/EU Clause(s) / sub-clause(s) of this EN Remarks / Notes 1. General conditions a
42、) the essential characteristics, the recognition and observance of which will ensure that electrical equipment will be used safely and in applications for which it was made, shall be marked on the electrical equipment, or, if this is not possible, on an accompanying document; Clause 8 b) the electri
43、cal equipment, together with its component parts, shall be made in such a way as to ensure that it can be safely and properly assembled and connected; All clauses c) the electrical equipment shall be so designed and manufactured as to ensure that protection against the hazards set out in points 2 an
44、d 3 is assured, providing that the equipment is used in applications for which it was made and is adequately maintained. See item 2 and 3 of this table 2. Protection against hazards arising from the electrical BS EN 61184:2017EN 61184:2017 6 equipment Measures of a technical nature shall be laid dow
45、n in accordance with point 1, in order to ensure that: a) persons and domestic animals are adequately protected against the danger of physical injury or other harm which might be caused by direct or indirect contact; Clauses 4, 9, 10, 11, 12, 13, 14, 15 and 17 b) temperatures, arcs or radiation whic
46、h would cause a danger, are not produced; Clauses 13, 15, 18, 19 and 20 c) persons, domestic animals and property are adequately protected against non-electrical dangers caused by the electrical equipment which are revealed by experience; Clauses 4, 13, 16 and 21 d) the insulation is suitable for fo
47、reseeable conditions. Clauses 10, 12, 13, 16, 18, 19 and 20 3. Protection against hazards which may be caused by external influences on the electrical equipment Technical measures shall be laid down in accordance with point 1, in order to ensure that the electrical equipment: a) meets the expected m
48、echanical requirements in such a way that persons, domestic animals and property are not endangered; Clauses 8, 9, 13, 16 and 21 b) is resistant to non-mechanical influences in expected environmental conditions, in such a way that persons, domestic animals and property are not endangered; Clauses 13
49、, 15,18, 19 and 20 c) does not endanger persons, domestic animals and property in foreseeable conditions of overload. Clauses 13, 15, 19 and 20 WARNING 1: Presumption of conformity stays valid only as long as a reference to this European standard is maintained in the list published in the Official Journal of the European Union. Users of this standard should consult frequently the latest list published in the Official Journal of the European Union. BS EN 61184:2017EN 61184:2017 6 equipment Measures of a technical nature s
