1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 61307:2011Industrial microwave heatinginstallations Test methodsfor the determination of poweroutputBS EN 61307:2011 BRITISH STANDARDNational forewordThis British Standard
2、is the UK implementation of EN 61307:2011. It isidentical to IEC 61307:2011. It supersedes BS EN 61307:2006 which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee PEL/27, Electroheating.A list of organizations represented on this committee can be obtained on
3、request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. BSI 2011 ISBN 978 0 580 70047 7 ICS 25.180.10 Compliance with a British Standard cannot confer immunity from legal obligations.This Bri
4、tish Standard was published under the authority of the Standards Policy and Strategy Committee on 31 August 2011.Amendments issued since publicationDate T e x t a f f e c t e dBS EN 61307:2011EUROPEAN STANDARD EN 61307 NORME EUROPENNE EUROPISCHE NORM July 2011 CENELEC European Committee for Electrot
5、echnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Management Centre: Avenue Marnix 17, B - 1000 Brussels 2011 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN
6、61307:2011 E ICS 25.180.10 Supersedes EN 61307:2006English version Industrial microwave heating installations - Test methods for the determination of power output (IEC 61307:2011) Installations industrielles de chauffage hyperfrquence - Mthodes dessai pour la dtermination de la puissance de sortie (
7、CEI 61307:2011) Industrielle Mikrowellen-Erwrmungsanlagen - Messverfahren fr die Bestimmung der Ausgangsleistung (IEC 61307:2011) This European Standard was approved by CENELEC on 2011-06-22. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions
8、 for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three o
9、fficial versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical c
10、ommittees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland
11、 and the United Kingdom. BS EN 61307:2011EN 61307:2011 - 2 - Foreword The text of document 27/761/CDV, future edition 3 of IEC 61307, prepared by IEC TC 27, Industrial electroheating, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 61307 on 2011-06-22. This European
12、Standard supersedes EN 61307:2006. EN 61307:2011 includes the following significant technical changes with respect to EN 61307:2006: a) it covers how to measure not only the microwave power output of all typical equipment designs, but also the system efficiency, including the standby and hibernation
13、 modes; b) the handling of the former A and B types of equipment is replaced by measurements of the available microwave power output and microwave workload power, respectively. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN a
14、nd CENELEC shall not be held responsible for identifying any or all such patent rights. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2012-03-22 latest date by which the nat
15、ional standards conflicting with the EN have to be withdrawn (dow) 2014-06-22 Annex ZA has been added by CENELEC. _ Endorsement notice The text of the International Standard IEC 61307:2011 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliogra
16、phy, the following notes have to be added for the standards indicated: IEC 60335-2-25 NOTE Harmonized as EN 60335-2-25. IEC 60335-2-90 NOTE Harmonized as EN 60335-2-90. IEC 60705 NOTE Harmonized as EN 60705. IEC 61010-2-010 NOTE Harmonized as EN 61010-2-010. _ BS EN 61307:2011- 3 - EN 61307:2011 Ann
17、ex ZA (normative) Normative references to international publications with their corresponding European publications The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edit
18、ion of the referenced document (including any amendments) applies. NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 60050-221 + A1 + A2 + A3 1990 1993 1999 2007 International Electr
19、otechnical Vocabulary - Chapter 221: Magnetic materials and components - - IEC 60050-726 1982 International Electrotechnical Vocabulary - Chapter 726: Transmission lines and waveguides - - IEC 60050-841 2004 International Electrotechnical Vocabulary - Part 841: Industrial electroheat - - IEC 60519-6
20、 - Safety in electroheat installations - Part 6: Specifications for safety in industrial microwave heating equipment EN 60519-6 - 2 61307 IEC:2011 CONTENTS 1 FOREWORD 3 1 Scope . 5 2 Normative references . 5 3 Terms and definitions . 5 4 Methods of microwave power measurements 8 General . 8 4.1Avail
21、able microwave power output . 8 4.2Microwave workload power 8 4.3Effective microwave power and efficiency 9 4.45 Calorimetric power measurements 9 General . 9 5.1Direct water power measurements . 9 5.2Dummy load power measurements 10 5.36 Determination of microwave workload power 10 7 Determination
22、of effective microwave power . 11 General . 11 7.1The open container water test . 11 7.2Tests using other liquids 12 7.38 Electrical efficiency 12 Available microwave power output . 12 8.1Electric input . 13 8.29 Standby power consumption . 13 Bibliography 14 61307 IEC:2011 3 INTERNATIONAL ELECTROTE
23、CHNICAL COMMISSION _ INDUSTRIAL MICROWAVE HEATING INSTALLATIONS TEST METHODS FOR THE DETERMINATION OF POWER OUTPUT FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committ
24、ees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Availabl
25、e Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organi
26、zations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical ma
27、tters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC Natio
28、nal Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, I
29、EC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itse
30、lf does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that t
31、hey have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature
32、 whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced p
33、ublications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International
34、 Standard IEC 61307 has been prepared by IEC technical committee 27: Industrial electroheating. This third edition cancels and replaces the second edition published in 2006. It constitutes a technical revision . This edition includes the following significant technical changes with respect to the pr
35、evious edition:- a) it covers how to measure not only the microwave power output of all typical equipment designs, but also the system efficiency, including the standby and hibernation modes; b) the handling of the former A and B types of equipment is replaced by measurements of the available microw
36、ave power output and microwave workload power, respectively. 4 61307 IEC:2011 The text of this standard is based on the following documents: CDV Report on voting 27/761/CDV 27/782/RVC Full information on the voting for the approval of this standard can be found in the report on voting indicated in t
37、he above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the s
38、pecific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. 61307 IEC:2011 5 INDUSTRIAL MICROWAVE HEATING INSTALLATIONS TEST METHODS FOR THE DETERMINATION OF POWER OUTPUT 1 Scope This International Standard specifies test methods for
39、the determination of the available microwave output power and the efficiency of frequency conversion from the electrical input in industrial microwave heating installations. This standard also specifies test methods for assessing the microwave power deposition in the microwave workload the microwave
40、 workload power, in microwave-only installations. This standard is applicable to industrial microwave heating equipment and installations in the frequency range from 300 MHz to 300 GHz. This standard relates to industrial microwave heating equipment operating under normal load. This standard does no
41、t apply to appliances for household and similar use (covered by IEC 60335-2-25), commercial use (covered by IEC 60335-2-90) or laboratory use (covered by IEC 61010-2-010). 2 Normative references The following referenced documents are indispensable for the application of this document. For dated refe
42、rences, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60050-221:1990, International Electrotechnical Vocabulary Chapter 221: Magnetic materials and components Amendment 1(1993) Amendment 2 (1999) Amendmen
43、t 3 (2007) IEC 60050-841:2004, International Electrotechnical Vocabulary Part 841: Industrial electroheat IEC 60050-726:1982, International Electrotechnical Vocabulary Chapter 726: Transmission lines and waveguides IEC 60519-6, Safety in electroheat installations Part 6: Specifications for safety in
44、 industrial microwave heating equipment 3 Terms and definitions For the purposes of this document, the terms and definitions of IEC 60519-6 and IEC 60050-841 as well as the following apply. 3.1calorimetric power meter calorimeter power meter power meter which uses temperature rise in a medium as a m
45、eans of measuring absorbed power 6 61307 IEC:2011 NOTE The medium, typically water, is either the power-absorbing agent or has heat transferred to it from a power-absorbing element. IEC 60050-726:1982, 726-21-10 3.2circulator passive device having three or more ports in which the power entering any
46、port is transmitted to the next port according to a given order of sequence NOTE The typical forms are junction circulators IEC 60050-221:1990, 221-05-14 of the T junction IEC 60050-726:1982, 726-17-12 or Y junction IEC 60050-726:1982, 726-17-13. IEC 60050-221:1990, 221-05-11, modified 3.3cross coup
47、ling (between generators) appearance of undesired microwave energy in a microwave generator or the transmission line output port of a microwave generator assembly caused by one or several other microwave generators or microwave generator assemblies 3.4electrical efficiency of microwave heating equip
48、ment quotient between the available microwave power output and the electric input to the mains frequency power supply or microwave generator assembly, at power settings for normal operation 3.5insertion loss loss resulting from the insertion of a network into a transmission system, the ratio of the
49、power delivered to that part of the system following the network, before insertion of the network, to the power delivered to that same part after insertion of the network NOTE The insertion loss is generally expressed in decibels. IEC 60050-726:1982, 726-06-07 3.6isolation (of a three-port circulator) reverse attenuation between the main output port and main input port, with all ports being impedance matched NOTE 1 The isolation should not be confused with the reverse loss
