1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationLamp controlgearPart 2-7: Particular requirements for battery supplied electronic controlgear for emergency lighting (self-contained)BS EN 61347-2-7:2012National forewordThis Bri
2、tish Standard is the UK implementation of EN 61347-2-7:2012. It isidentical to IEC 61347-2-7:2011. It supersedes BS EN 61347-2-7:2006 whichis withdrawn.The UK participation in its preparation was entrusted by Technical CommitteeCPL/34, Lamps and Related Equipment, to Subcommittee CPL/34/3, Auxiliari
3、esfor lamps.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions of acontract. Users are responsible for its correct application. The British Standards Institution 2012Published by B
4、SI Standards Limited 2012ISBN 978 0 580 64151 0ICS 29.140.99Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of the StandardsPolicy and Strategy Committee on 31 March 2012.Amendments issued since publicationAmd. N
5、o. Date Text affectedBRITISH STANDARDBS EN 61347-2-7:2012EUROPEAN STANDARD EN 61347-2-7 NORME EUROPENNE EUROPISCHE NORM March 2012 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Manageme
6、nt Centre: Avenue Marnix 17, B - 1000 Brussels 2012 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 61347-2-7:2012 E ICS 29.140.99 Supersedes EN 61347-2-7:2006English version Lamp controlgear - Part 2-7: Particular requirements fo
7、r battery supplied electronic controlgear for emergency lighting (self-contained) (IEC 61347-2-7:2011) Appareillages de lampes - Partie 2-7: Rgles particulires relatives aux appareillages lectroniques aliments par batterie pour lclairage de secours (autonome) (CEI 61347-2-7:2011) Gerte fr Lampen - T
8、eil 2-7: Besondere Anforderungen an batterieversorgte elektronische Betriebsgerte fr die Notbeleuchtung (mit Einzelbatterie) (IEC 61347-2-7:2011) This European Standard was approved by CENELEC on 2012-01-11. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulat
9、e the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European
10、Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members
11、 are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia,
12、Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 61347-2-7:2012EN 61347-2-7:2012 - 2 - Foreword The text of document 34C/995/FDIS, future edition 3 of IEC 61347-2-7, prepared by SC 34C, “Auxiliaries for lamps“, of IEC/TC 34, “Lamps and related equipment“ was submitted to th
13、e IEC-CENELEC parallel vote and approved by CENELEC as EN 61347-2-7:2012. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2012-10-11 latest date by which the national sta
14、ndards conflicting with the document have to be withdrawn (dow) 2015-01-11 This document supersedes EN 61347-2-7:2006. EN 61347-2-7:2012 includes the following significant technical changes with respect to EN 61347-2-7:2006: modification of EN 61347-2-7 to become a standard exclusively for d.c. batt
15、ery supplied electronic controlgear for emergency lighting (self-contained). EN 61347-2-3:2011, Annex J, is intended to cover centrally supplied emergency controlgear; update of Clause 22 Recharging devices; modification of Clause 20 battery voltage characterisation to support EBLF measurement. This
16、 to simplify and increase reproducibility of testing; rationalisation of requirements between EN 61347-2-7 and EN 60598-2-22, requirements of EN 60598-2-22 being transferred to EN 61347-2-7. This standard shall be used in conjunction with EN 61347-1:2008 + A1:2011 + A2:200X1. This part 2 supplements
17、 or modifies the corresponding clauses in EN 61347-1. NOTE In this standard, the following print types are used: requirements: in roman type. test specifications: in italic type. notes: in small roman type. Attention is drawn to the possibility that some of the elements of this document may be the s
18、ubject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 61347-2-7:2011 was approved by CENELEC as a European Standard without any modification. 1To be published. BS EN 61347
19、-2-7:2012- 3 - EN 61347-2-7:2012 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated refer
20、ences, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN
21、/HD Year IEC 60081 - Double-capped fluorescent lamps - Performance specifications EN 60081 - IEC 60598-2-22 - Luminaires - Part 2-22: Particular requirements - Luminaires for emergency lighting EN 60598-2-22 - IEC 60901 - Single-capped fluorescent lamps - Performance specifications EN 60901 - IEC 60
22、921 - Ballasts for tubular fluorescent lamps - Performance requirements EN 60921 - IEC 60929 - AC and/or DC-supplied electronic control gear for tubular fluorescent lamps - Performance requirements EN 60929 - IEC 61347-1 - Lamp controlgear - Part 1: General and safety requirements EN 61347-1 - IEC 6
23、1347-2-3 - Lamp controlgear - Part 2-3: Particular requirements for a.c. and/or d.c. supplied electronic control gear for fluorescent lamps EN 61347-2-3 - IEC 61558-1 + corr. March + corr. March + A1 2005 2010 2008 2009 Safety of power transformers, power supplies, reactors and similar products - Pa
24、rt 1: General requirements and tests EN 61558-1 + corr. August + A1 2005 2006 2009 IEC 61558-2-1 2007 Safety of power transformers, power supplies, reactors and similar products - Part 2-1: Particular requirements and tests for separating transformers and power supplies incorporating separating tran
25、sformers for general applications EN 61558-2-1 2007 IEC 61558-2-6 2009 Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-6: Particular requirements and tests for safety isolating transformers and power supply units incorporating safe
26、ty isolating transformers EN 61558-2-6 2009 IEC 61558-2-16 2009 Safety of transformers, reactors, power supply units and similar products for voltages up to 1 100 V - Part 2-16: Particular requirements and tests for switch mode power supply units and transformers for switch mode power supply units E
27、N 61558-2-16 2009 BS EN 61347-2-7:2012EN 61347-2-7:2012 - 4 - Publication Year Title EN/HD Year IEC 62034 - Automatic test system for battery powered emergency escape lighting EN 62034 - BS EN 61347-2-7:2012 2 61347-2-7 IEC:2011 CONTENTS INTRODUCTION . 6 1 Scope . 7 2 Normative references . 7 3 Term
28、s and definitions . 8 4 General requirements . 9 5 General notes on tests . 10 6 Classification 10 7 Marking 10 8 Protection against accidental contact with live parts . 12 9 Terminals . 12 10 Provisions for protective earthing . 12 11 Moisture resistance and insulation 12 12 Electric strength . 12
29、13 Thermal endurance test for windings of ballasts . 12 14 Fault conditions 12 15 Starting conditions 12 16 Lamp current 13 17 Supply current 13 18 Maximum current in any lead (with cathode preheating) . 13 19 Lamp operating current waveforms . 13 20 Functional safety (EBLF) 14 21 Changeover operati
30、on 15 22 Recharging device 16 23 Protection against excessive discharge 18 24 Indicator . 19 25 Remote control, rest mode, inhibition mode 19 26 Temperature cycling test and endurance test . 20 27 Polarity reversal . 20 28 Fault conditions 21 29 Construction . 21 30 Creepage distances and clearances
31、 . 21 31 Screws, current-carrying parts and connections 21 32 Resistance to heat, fire and tracking . 21 33 Resistance to corrosion 21 34 Abnormal lamp conditions 21 35 Protection of associated components . 26 Annex A (normative) Test to establish whether a conductive part is a live part, which may
32、cause an electric shock . 28 Annex B (normative) Particular requirements for thermally protected lamp controlgear 28 Annex C (normative) Particular requirements for electronic lamp controlgear with means of protection against overheating . 28 BS EN 61347-2-7:201261347-2-7 IEC:2011 3 Annex D (normati
33、ve) Requirements for carrying out the heating test of thermally protected lamp controlgear . 28 Annex E (normative) Use of constant S other than 4 500 in twtests . 28 Annex F (normative) Draught-proof enclosure 28 Annex G (normative) Explanation of the derivation of the values of pulse voltages 29 A
34、nnex H (normative) Tests 29 Annex I (normative) Batteries for emergency lighting luminaires 29 Annex J (informative) Rest mode and inhibition mode facilities 29 Annex K (normative) Ballasts incorporating an automatic testing function for emergency lighting operation 30 Annex L (informative) Compatib
35、ility between normal mains operation electronic controlgear and battery-powered emergency operation controlgear . 33 Figure 1 Suitable circuit for the measurement of lamp current and luminous flux . 15 Figure 2 Rectifying effect test 23 Figure 3 Circuit to test whether a controlgear can withstand a
36、leaking burner 24 Figure 4 Circuit to test whether a ballast can withstand rectification . 26 Figure L.1 Timing diagram: changeover operation 34 Figure L.2 Supply voltage for the function test . 35 Table 1 Voltage per cell to which the battery is discharged 16 Table 2 Relation between r.m.s. working
37、 voltage and maximum peak voltage 26 Table K.1 Relevant requirements of IEC 62034 30 BS EN 61347-2-7:2012 6 61347-2-7 IEC:2011 INTRODUCTION The formatting into separately published parts provides for ease of future amendments and revisions. Additional requirements will be added as and when a need fo
38、r them is recognized. This standard, and the parts which make up IEC 61347-2, in referring to any of the clauses of IEC 61347-1, specify the extent to which such a clause is applicable and the order in which the tests are to be performed; they also include additional requirements, as necessary. All
39、parts which make up IEC 61347-2 are self-contained and, therefore, do not include reference to each other. Where the requirements of any of the clauses of IEC 61347-1 are referred to in this standard by the phrase “The requirements of Clause n of IEC 61347-1 apply“, this phrase is interpreted as mea
40、ning that all requirements of the clause in question of Part 1 apply, except any which are clearly inapplicable to the specific type of lamp controlgear covered by this particular part of IEC 61347-2. BS EN 61347-2-7:201261347-2-7 IEC:2011 7 LAMP CONTROLGEAR Part 2-7: Particular requirements for bat
41、tery supplied electronic controlgear for emergency lighting (self-contained) 1 Scope This part of IEC 61347 specifies particular safety requirements for battery supplied electronic controlgear for maintained and non-maintained emergency lighting purposes. It includes specific requirements for electr
42、onic controlgear and control units for self-contained luminaires for emergency lighting as specified by IEC 60598-2-22. It is intended for controlgear for fluorescent lamps, but it is also applicable to other lamp types e.g. incandescent, high pressure discharge lamps and LEDs. This standard covers
43、the emergency mode operation of a controlgear. For controlgear with a combination of normal and emergency lighting operation, the normal lighting operation aspects are covered by the appropriate part 2 of IEC 61347. DC supplied electronic controlgear for emergency lighting may or may not include bat
44、teries. This standard also includes operational requirements for electronic controlgear, which, in the case of d.c. supplied electronic controlgear, are regarded as performance requirements. This is because non-operational emergency lighting equipment presents a safety hazard. It does not apply to d
45、.c. supplied electronic controlgear for emergency lighting, which are intended for connection to a centralised emergency power supply system. A centralised emergency power system could be a central battery system. NOTE Annex J of IEC 61347-2-3 applies to a.c., a.c./d.c. or d.c. supplied electronic c
46、ontrolgear for connection to centralised emergency power supply systems that are also intended for emergency lighting operations from a.c./d.c. supplies. 2 Normative references For the purpose of this part of IEC 61347, the normative references given in Clause 2 of IEC 61347-1, which are mentioned i
47、n this standard, apply, together with the following normative references. IEC 60081, Double-capped fluorescent lamps Performance specifications IEC 60598-2-22, Luminaires Part 2: Particular requirements Luminaires for emergency lighting IEC 60901, Single-capped fluorescent lamps Performance specific
48、ations IEC 60921, Ballasts for tubular fluorescent lamps Performance requirements IEC 60929, AC and/or DC-supplied electronic control gear for tubular fluorescent lamps Performance requirements IEC 61347-1, Lamp controlgear Part 1: General and safety requirements BS EN 61347-2-7:2012 8 61347-2-7 IEC
49、:2011 IEC 61347-2-3, Lamp control gear Part 2-3: Particular requirements for a.c. and/or d.c. supplied electronic control gear for fluorescent lamps IEC 61558-1:2005, Safety of power transformers, power supplies, reactors and similar products Part 1: General requirements and tests Amendment 1 (2009)1IEC 61558-2-1:2007, Safety of power transformers, power supply units and similar products Part 2-1: Particular requirements and tests for separating transformers and power supplie
