1、BSI Standards PublicationSafety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V Part 2-16: Particular requirements and tests for switch mode power supply units and transformers for switch mode power supply unitsBS EN 61558-2-16:2009BS EN 61558-2-1
2、6:2009+A1:2013BS EN 61558-2-16:2009+A1:2013 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 61558-2-16:2009+A1:2013. It is identical to IEC 61558-2-16:2009, incorporating amendment 1:2013. It supersedes BS EN 61558-2-16:2009 which is withdrawn.The start and fini
3、sh of text introduced or altered by amendment is indicated in the text by tags. Tags indicating changes to IEC text carry the number of the IEC amendment. For example, text altered by IEC amendment 1 is indicated by .The UK participation in its preparation was entrusted to Technical Committee PEL/96
4、, Small transformers.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2014. P
5、ublished by BSI Standards Limited 2014ISBN 978 0 580 79839 9ICS 29.180Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 January 2010.Amendments/corrigenda issue
6、d since publicationDate Text affected28 February 2014 Implementation of IEC amendment 1:2013 with CENELEC endorsement A1:2013. Annex ZA amendedEUROPEAN STANDARD EN 61558-2-16 NORME EUROPENNE EUROPISCHE NORM December 2009 CENELEC European Committee for Electrotechnical Standardization Comit Europen d
7、e Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: Avenue Marnix 17, B - 1000 Brussels 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 61558-2-16:2009 E ICS 29.180 Supersede
8、s EN 61558-2-17:1997English version Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-16: Particular requirements and tests for switch mode power supply units and transformers for switch mode power supply units (IEC 61558-2-16:2009)
9、Scurit des transformateurs, bobines dinductance, blocs dalimentation et produits analogues pour des tensions dalimentation jusqu 1 100 V - Partie 2-16: Rgles particulires et essais pour les blocs dalimentation dcoupage et les transformateurs pour blocs dalimentation dcoupage (CEI 61558-2-16:2009) Si
10、cherheit von Transformatoren, Drosseln, Netzgerten und dergleichen fr Versorgungsspannungen bis 1 100 V - Teil 2-16: Besondere Anforderungen und Prfungen an Schaltnetzteilen (SMPSU) und Transformatoren in Schaltnetzteilen (IEC 61558-2-16:2009) This European Standard was approved by CENELEC on 2009-1
11、0-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obt
12、ained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Cen
13、tral Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg,
14、Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 61558-2-16:2009BS EN 61558-2-16:2009+A1:2013EN 61558-2-16:2009+A1November 2013EN 61558-2-16:2009 2 Foreword The text of document 96/330/FDIS, future edition 1 of IE
15、C 61558-2-16, prepared by IEC TC 96, Transformers, reactors, power supply units and similar products for low voltage up to 1 100 V, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 61558-2-16 on 2009-10-01. This European Standard supersedes EN 61558-2-17:1997. The fol
16、lowing dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2010-07-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2012-10-01 This standard is
17、to be used in conjunction with EN 61558-1 and its amendments. It is based on EN 61558-1:2005. This Part 2-16 supplements or modifies the corresponding clauses in EN 61558-1, so as to convert that publication into the European Standard: Particular requirements and tests for switch mode power supply u
18、nits and transformers for switch mode power supply units. When a particular subclause of Part 1 is not mentioned in this part, that subclause applies as far as is reasonable. Where this standard states “addition“, “modification“ or “replacement“, the relevant text of Part 1 is to be adapted accordin
19、gly. In this part, the following print types are used: requirements proper: in roman type; test specifications: in italic type; explanatory matter: in smaller roman type. In the text of this standard, the words in bold are defined in Clause 3. Subclauses, notes, figures and tables additional to thos
20、e in Part 1 are numbered starting from 101; supplementary annexes are entitled AA, BB, etc. Annex ZA has been added by CENELEC. _ Endorsement notice The text of the International Standard IEC 61558-2-16:2009 was approved by CENELEC as a European Standard without any modification. _ BS EN 61558-2-16:
21、2009 2 BS EN 61558-2-16:2009+A1:2013EN 61558-2-16:2009+A1:2013EN 61558-2-16:2009/A1:2013 - 2 - Foreword The text of document 96/401/FDIS, future IEC 61558-2-16:2009/A1, prepared by IEC/TC 96, “Transformers, reactors, power supply units and combinations thereof“ was submitted to the IEC-CENELEC paral
22、lel vote and approved by CENELEC as EN 61558-2-16:2009/A1:2013. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2014-06-16 latest date by which the national standards con
23、flicting with the document have to be withdrawn (dow) 2016-09-16 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. This standard covers
24、the Principle Elements of the Safety Objectives for Electrical Equipment Designed for Use within Certain Voltage Limits (LVD - 2006/95/EC). Endorsement notice The text of the International Standard IEC 61558-2-16:2009/A1:2013 was approved by CENELEC as a European Standard without any modification. I
25、n the official version, for Bibliography, the following note has to be added for the standard indicated : The bibliography of Part 1 is applicable, except as follows : Addition: IEC 61800-5-1 NOTE Harmonised as EN 61800-5-1. 3 BS EN 61558-2-16:2009+A1:2013EN 61558-2-16:2009+A1:2013EN 61558-2-16:2009
26、/A1:2013 - 2 - Foreword The text of document 96/401/FDIS, future IEC 61558-2-16:2009/A1, prepared by IEC/TC 96, “Transformers, reactors, power supply units and combinations thereof“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61558-2-16:2009/A1:2013. The following da
27、tes are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2014-06-16 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2016-09-16 Attention is dr
28、awn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. This standard covers the Principle Elements of the Safety Objectives for Electrical Equipment Designe
29、d for Use within Certain Voltage Limits (LVD - 2006/95/EC). Endorsement notice The text of the International Standard IEC 61558-2-16:2009/A1:2013 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following note has to be added for
30、 the standard indicated : The bibliography of Part 1 is applicable, except as follows : Addition: IEC 61800-5-1 NOTE Harmonised as EN 61800-5-1. Foreword to amendment A1 3 EN 61558-2-16:2009 Annex ZA (normative) Normative references to international publications with their corresponding European pub
31、lications Addition to Annex ZA of EN 61558-1: Publication Year Title EN/HD Year IEC 60227 Series Polyvinyl chloride insulated cables of rated voltages up to and including 450/750 V 1) IEC 60364-4-41 (mod) 2)Low-voltage electrical installations - Part 4-41: Protection for safety - Protection against
32、electric shock HD 60364-4-41 + corr. July 2007 3)2007 IEC 60601-1 2)Medical electrical equipment - Part 1: General requirements for basic safety and essential performance EN 60601-1 2006 3)IEC 60664-4 2005 Insulation coordination for equipment within low-voltage systems - Part 4: Consideration of hi
33、gh-frequency voltage stress EN 60664-4 + corr. October 2006 2006 IEC 60950-1 (mod) 2)Information technology equipment - Safety - Part 1: General requirements EN 60950-1 + A11 2006 3)2009 IEC 61010-1 2)Safety requirements for electrical equipment for measurement, control and laboratory use - Part 1:
34、General requirements EN 61010-1 + corr. June 2001 3)2002 IEC 61204-7 2006 Low voltage power supplies, d.c. output - Part 7: Safety requirements EN 61204-7 + A11 2006 2009 IEC 61347 (mod) Series Lamp controlgear EN 61347 Series IEC 61558-1 2005 Safety of power transformers, power supplies, reactors a
35、nd similar products - Part 1: General requirements and tests EN 61558-1 + corr. August 2005 2006 IEC 61558-2-1 2)Safety of power transformers, power supplies, reactors and similar products - Part 2-1: Particular requirements and tests for separating transformers and power supplies incorporating sepa
36、rating transformers for general applications EN 61558-2-1 2007 3)IEC 61558-2-4 2)Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-4: Particular requirements and tests for isolating transformers and power supply units incorporating i
37、solating transformers EN 61558-2-4 2009 3)1)The HD 21 series, which is related to, but not directly equivalent with the IEC 60227 series, applies instead. 2)Undated reference. 3)Valid edition at date of issue. BS EN 61558-2-16:2009 4 BS EN 61558-2-16:2009+A1:2013EN 61558-2-16:2009+A1:2013- 3 - EN 61
38、558-2-16:2009/A1:2013 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only
39、 the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Add, to the existing list of referen
40、ces, the following new references: Publication Year Title EN/HD Year IEC 60317-0-7 2012 Specifications for particular types of winding wires - Part 0-7: General requirements - Fully insulated (FIW) zero-defect enamelled round copper wire with nominal conductor diameter of 0,040 mm to 1,600 mm EN 603
41、17-0-7 2012 IEC 60317-43 - Specifications for particular types of winding wires - Part 43: Aromatic polyimide tape wrapped round copper wire, class 240 EN 60317-43 - IEC 60317-56 - Specifications for particular types of winding wires - Part 56: Solderable fully insulated (FIW) zero-defect polyuretha
42、ne enamelled round copper wire with nominal conductor diameter of 0,040 mm to 1,600 mm, class 180 EN 60317-56 - IEC 60851-3 2009 Winding wires - Test methods - Part 3: Mechanical properties EN 60851-3 2009 IEC 60851-5 2008 Winding wires - Test methods - Part 5: Electrical properties EN 60851-5 2008
43、EN 61558-2-16:2009 4 Publication Year Title EN/HD Year IEC 61558-2-6 2)Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-6: Particular requirements and tests for safety isolating transformers and power supply units incorporating safe
44、ty isolating transformers EN 61558-2-6 2009 3)IEC 61558-2-13 2)Safety of transformers, reactors, power supply units and similar products for supply voltages up to 1 100 V - Part 2-13: Particular requirements and tests for auto transformers and power supply units incorporating auto transformers EN 61
45、558-2-13 2009 3)IEC 62040 Series Uninterruptible Power Systems (UPS) EN 62040 Series BS EN 61558-2-16:2009 5 BS EN 61558-2-16:2009+A1:2013EN 61558-2-16:2009+A1:2013- 3 - EN 61558-2-16:2009/A1:2013 Annex ZA (normative) Normative references to international publications with their corresponding Europe
46、an publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments)
47、applies. NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Add, to the existing list of references, the following new references: Publication Year Title EN/HD Year IEC 60317-0-7 2012 Specifications for particular types o
48、f winding wires - Part 0-7: General requirements - Fully insulated (FIW) zero-defect enamelled round copper wire with nominal conductor diameter of 0,040 mm to 1,600 mm EN 60317-0-7 2012 IEC 60317-43 - Specifications for particular types of winding wires - Part 43: Aromatic polyimide tape wrapped ro
49、und copper wire, class 240 EN 60317-43 - IEC 60317-56 - Specifications for particular types of winding wires - Part 56: Solderable fully insulated (FIW) zero-defect polyurethane enamelled round copper wire with nominal conductor diameter of 0,040 mm to 1,600 mm, class 180 EN 60317-56 - IEC 60851-3 2009 Winding wires - Test methods - Part 3: Mechanical properties EN 60851-3 2009 IEC 60851-5 2008 Winding wires - Test methods - Part 5: Electrical properties EN 60851-5 2008 2 6155
