1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationBS EN 61558-2-5:2010Safety of transformers,reactors, power supply unitsand combinations thereofPart 2-5: Particular requirements and testsfor transformer for shavers, power suppl
2、yunits for shavers and shaver supply unitsBS EN 61558-2-5:2010 BRITISH STANDARDNational forewordThis British Standard is the UK implementation of EN 61558-2-5:2010. It is identical to IEC 61558-2-5:2010. It supersedes BS EN 61558-2-5:1998, which will be withdrawn on 1 July 2013.The UK participation
3、in its preparation was entrusted to TechnicalCommittee PEL/96, Small transformers.A list of organizations represented on this committee can beobtained on request to its secretary.This publication does not purport to include all the necessaryprovisions of a contract. Users are responsible for its cor
4、rectapplication. BSI 2010 ISBN 978 0 580 64544 0 ICS 29.180 Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 30 September 2010. Amendments issued since publicationD
5、ate T e x t a f f e c t e dEUROPEAN STANDARD EN 61558-2-5 NORME EUROPENNE EUROPISCHE NORM July 2010 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Management Centre: Avenue Marnix 17, B
6、- 1000 Brussels 2010 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 61558-2-5:2010 E ICS 29.180 Supersedes EN 61558-2-5:1998 + A11:2004English version Safety of transformers, reactors, power supply units and combinations thereof
7、- Part 2-5: Particular requirements and tests for transformer for shavers, power supply units for shavers and shaver supply units (IEC 61558-2-5:2010) Scurit des transformateurs, bobines dinductance, blocs dalimentation et des combinaisons de ces lments - Partie 2-5: Rgles particulires et essais pou
8、r les transformateurs pour rasoirs, blocs dalimentation incorporant un transformateur pour rasoirs et blocs dalimentation pour rasoirs (CEI 61558-2-5:2010) Sicherheit von Transformatoren, Drosseln, Netzgerten und entsprechende Kombinationen - Teil 2-5: Besondere Anforderungen und Prfungen an Transfo
9、rmatoren fr Rasierer, Netzgerte fr Rasierer und Rasiersteckdosen-Einheiten (IEC 61558-2-5:2010) This European Standard was approved by CENELEC on 2010-07-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard
10、 the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French,
11、 German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bul
12、garia, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 615
13、58-2-5:2010EN 61558-2-5:2010 - 2 - Foreword The text of document 96/353/FDIS, future edition 2 of IEC 61558-2-5, prepared by IEC TC 96, Transformers, reactors, power supply units and similar products for low voltage up to 1 100 V, was submitted to the IEC-CENELEC parallel vote and was approved by CE
14、NELEC as EN 61558-2-5 on 2010-07-01. This European Standard supersedes EN 61558-2-5:1998 + A1:2004. The main changes consist of updating this part in accordance with EN 61558-1:2005 and adding power supply units to the scope. This part has the status of a group safety publication in accordance with
15、IEC Guide 104:1997, The preparation of safety publications and the use of basic safety publications and group safety publications. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and CENELEC shall not be held responsible for i
16、dentifying any or all such patent rights. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2011-04-01 latest date by which the national standards conflicting with the EN have t
17、o be withdrawn (dow) 2013-07-01 This part is intended to be used in conjunction with the latest edition of EN 61558-1 and its amendments. It is based on the second edition (2005) of that standard. This part supplements or modifies the corresponding clauses in EN 61558-1, so as to convert that public
18、ation into the EN standard: Particular requirements and test for transformer for shavers, power supply units for shavers and shaver supply units. A list of all parts of the EN 61558 series, under the general title: Safety of transformers, reactors, power supply units and combinations thereof, can be
19、 found on the CENELEC website. Future standards in this series will carry the new general title as cited above. Titles of existing standards in this series will be updated at the time of the next edition. Where a particular subclause of Part 1 is not mentioned in this part, that subclause applies as
20、 far as is reasonable. Where this part states “addition“, “modification“ or “replacement“, the relevant text of Part 1 is to be adopted accordingly. In this part, the following print types are used: requirements proper: in roman type; test specifications: in italic type; explanatory matters: in smal
21、ler roman type. In the text of this part, the words in bold are defined in Clause 3. Subclauses, notes, figures and tables additional to those in Part 1 are numbered starting from 101; supplementary annexes are entitled AA, BB, etc. This European Standard has been prepared under a mandate given to C
22、ENELEC by the European Commission and the European Free Trade Association and covers essential requirements of EC Directive 2006/95/EC. BS EN 61558-2-5:2010- 3 - EN 61558-2-5:2010 Annex ZA has been added by CENELEC. _ Endorsement notice The text of the International Standard IEC 61558-2-5:2010 was a
23、pproved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following note has to be added for the standard indicated: IEC 61558-2-16:2009 NOTE Harmonized as EN 61558-2-16:2009 (not modified). _ BS EN 61558-2-5:2010EN 61558-2-5:2010 - 4 - Annex
24、ZA (normative) Normative references to international publications with their corresponding European publications The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition
25、 of the referenced document (including any amendments) applies. NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Annex ZA of Part 1 is applicable except as follows: Addition: Publication Year Title EN/HD Year IEC 60068-
26、2-62 1991 Environmental testing - Part 2: Test methods - Test Ef: Impact, pendulum hammer EN 60068-2-621) 2) 1995 IEC 60670 Series Boxes and enclosures for electrical accessories for household and similar fixed electrical installations EN 60670 Series IEC 61558-1 2005 Safety of power transformers, p
27、ower supplies, reactors and similar products - Part 1: General requirements and tests EN 61558-1 + corr. August 2005 2006 1) EN 60068-2-62 includes A1 to IEC 60068-2-62. 2) EN 60068-2-62 is superseded by EN 60068-2-75:1997, which is based on IEC 60068-2-75:1997. 61558-2-5 IEC:2010 CONTENTS 1 Scope.5
28、 2 Normative references6 3 Terms and definitions .6 4 General requirements .6 5 General notes on tests6 6 Ratings.7 7 Classification 7 8 Marking and other information.7 9 Protection against electric shock.8 10 Change of input voltage setting .8 11 Output voltage and output current under load 8 12 No
29、-load output voltage8 13 Short-circuit voltage9 14 Heating.9 15 Short-circuit and overload protection .9 16 Mechanical strength9 17 Protection against harmful ingress of dust, solid objects and moisture.10 18 Insulation resistance, dielectric strength, and leakage current .10 19 Construction .10 20
30、Components .12 21 Internal wiring.13 22 Supply connection and other external flexible cables or cords13 23 Terminals for external conductors .13 24 Provision for protective earthing13 25 Screws and connections .13 26 Creepage distances, clearances and distances through insulation .13 27 Resistance t
31、o heat, fire, and tracking 13 28 Resistance to rusting 14 Annexes15 Bibliography15 Table 101 Values of heights of fall10 4BS EN 61558-2-5:201061558-2-5 IEC:2010 5 SAFETY OF TRANSFORMERS, REACTORS, POWER SUPPLY UNITS AND COMBINATIONS THEREOF Part 2-5: Particular requirements and test for transformer
32、for shavers, power supply units for shavers and shaver supply units 1 Scope Replacement: This part of IEC 61558 deals with the safety of shaver transformers, power supply units incorporating a shaver transformer, and shaver supply units. Shaver transformers incorporating electronic circuits are also
33、 covered by this standard. NOTE 1 Safety includes electrical, thermal, mechanical and chemical aspects. Unless otherwise specified, from here onward, the term transformer covers shaver transformers and power supply units incorporating shaver transformers and shaver supply units. This part is applica
34、ble to stationary, single phase air-cooled (natural or forced), independent or associated dry- type transformers. The windings may be encapsulated or non-encapsulated. This standard is applicable to transformers and power supply (linear) with internal operational frequencies not exceeding 500 Hz. Th
35、is standard used in combination with Part 2-16 for switch mode power supply units (SMPS) is also applicable to power supplies with internal operational frequencies higher than 500 Hz. Where the two requirements are in conflict the most severe take precedence. The rated supply voltage does not exceed
36、 250 V a.c., and the rated supply frequency does not exceed 500 Hz. The rated output is not less than 20 VA and does not exceed 50 VA . The no-load output voltage does not exceed 275 V a.c and the rated output voltage does not exceed 250 V a.c. This part is not applicable to external circuits and th
37、eir components intended to be connected to the input and output terminals or socket-outlets of the transformers. Transformers covered by this part are used in applications where double or reinforced insulation between circuits is required by the installation rules for bathrooms and similar locations
38、, or by the appliance specifications. NOTE 2 Transformers covered by this part may be flush or surface mounted or incorporated in luminaires, mirrors, and other equipment containing one or more socket-outlet(s). NOTE 3 Attention is drawn to the following: - for transformers intended to be used in ve
39、hicles, on board ships, and aircraft, additional requirements (from other applicable standards, national rules, etc.) may be necessary; BS EN 61558-2-5:2010 6 61558-2-5 IEC:2010 - measures to protect the enclosure and the components inside the enclosure against external influences such as fungus, ve
40、rmin, termites, solar-radiation, and icing should also be considered; - the different conditions for transportation, storage, and operation of the transformers should also be considered; - additional requirements in accordance with other appropriate standards and national rules may be applicable to
41、transformers intended for use in special environments. NOTE 4 Future technological development of transformers may necessitate a need to increase the upper limit of the frequencies, until then this part may be used as a guidance document. 2 Normative references This clause of Part 1 is applicable ex
42、cept as follows: Addition: IEC 60068-2-62:1:1991, Environmental testing Part 2: Test methods Test Ef: Impact, pendulum hammer1IEC 60670 (all parts), Boxes and enclosures for electrical accessories for household and similar fixed electrical installations IEC 61558-1 :2005, Safety of power transformer
43、s, power supplies, reactors and similar products Part 1: General requirements and tests 3 Terms and definitions This clause of Part 1 is applicable except as follows: Addition: 3.1.101 shaver transformer isolating transformer for fixed installation and with a limited output, designed to supply elect
44、ric shavers, toothbrushes, and similar appliances rated 50 VA or less used in a bathroom. It supplies only one shaver, or the like, at a time 3.1.102 shaver supply unit accessory embodying a shaver transformer or a power supply unit incorporating a shaver transformer, and one or more socket outlets
45、allowing the use of only one plug at a time 4 General requirements This clause of Part 1 is applicable. 5 General notes on tests This clause of Part 1 is applicable. _ 1This publication was withdrawn and replaced by IEC 60068-2-75 (1997), but for the purposes of this standard, the IEC 60068-2-62 is
46、cited. BS EN 61558-2-5:201061558-2-5 IEC:2010 7 6 Ratings Replacement: 6.101 The rated output voltage shall not exceed 250 V a.c. 6.102 The rated output shall not be less than 20 VA and shall not exceed 50 VA. 6.103 The rated supply frequency and internal operating frequency shall not exceed 500 Hz.
47、 6.104 The rated supply voltage shall not exceed 250 V a.c. Compliance with the requirements 6.101 to 6.104 is checked by inspection of the marking. 7 Classification This clause of Part 1 is applicable except as follows: 7.2 Replacement: According to short-circuit protection or protection against ab
48、normal conditions: inherently short-circuit proof transformer; non-inherently short-circuit proof transformer. 8 Marking and other information This clause of Part 1 is applicable except as follows: 8.1 h) Replacement of the first sentence by the following: relevant graphical symbols shown in 8.11 in
49、dicating the kind of transformer; 8.1 n) Modification: indication of the protection code IP for transformers, if higher than IP00; indication of the protection code IP for shaver supply units, if higher than IP21. 8.7 Addition: For shaver supply units provided with a single-pole switch, the switched pole shall be connected to the line. BS EN 61558-2-5:2010 8 61558-2-5 IEC:2010 8.11 Addition: Symbol or graphical symbol Explanation or title IdentificationShaver supply units and transformer
