1、Fibre optic interconnecting devices and passive components Performance standardPart 052-6: Single-mode fibre non-connectorized fixed attenuator Category O in outside plant environmentBS EN 61753-052-6:2016BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06National forew
2、ordThis British Standard is the UK implementation of EN 61753-052-6:2016. Itis identical to IEC 61753-052-6:2016.The UK participation in its preparation was entrusted by TechnicalCommittee GEL/86, Fibre optics, to Subcommittee GEL/86/2, Fibre opticinterconnecting devices and passive components.A lis
3、t of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions ofa contract. Users are responsible for its correct application. The British Standards Institution 2017.Published by BSI Standards Lim
4、ited 2017ISBN 978 0 580 77562 8ICS 33.180.20Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 January 2017.Amendments/corrigenda issued since publicationDate Text
5、 affectedBRITISH STANDARDBS EN 61753-052-6:2016EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 61753-052-6 December 2016 ICS 33.180.20 English Version Fibre optic interconnecting devices and passive components - Performance standard - Part 052-6: Single-mode fibre non-connectorized fixed attenu
6、ator - Category O in outside plant environment (IEC 61753-052-6:2016) Dispositifs dinterconnexion et composants passifs fibroniques - Norme de performance - Partie 052-6: Affaiblisseur optique fixe non connectoris pour fibres unimodales - Catgorie O pour des installations dans un environnement extri
7、eur (IEC 61753-052-6:2016) Lichtwellenleiter - Verbindungselemente und passive Bauteile - Betriebsverhalten - Teil 052-6: Nicht mit Steckverbindern versehene Festwert-Einmoden-Lichtwellenleiter-Dmpfungsglieder - Kategorie O in Freiluftanlagen (IEC 61753-052-6:2016) This European Standard was approve
8、d by CENELEC on 2016-09-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such nationa
9、l standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own
10、language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia,
11、France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de
12、 Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 61753-052-6:2016 E BS EN 61753-05
13、2-6:2016EN 61753-052-6:2016 2 European foreword The text of document 86B/3995/FDIS, future edition 1 of IEC 61753-052-6, prepared by SC 86B “Fibre optic interconnecting devices and passive components“ of IEC/TC 86 “Fibre optics“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC
14、as EN 61753-052-6:2016. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2017-06-23 latest date by which the national standards conflicting with the document have to be wi
15、thdrawn (dow) 2019-12-23 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC
16、 61753-052-6:2016 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 60068-1 NOTE Harmonized as EN 60068-1. IEC 60869-1 NOTE Harmonized as EN 60869-1. IEC 61300 NOTE
17、 Harmonized in EN 61300 series. IEC 61300-3-28 NOTE Harmonized as EN 61300-3-28. BS EN 61753-052-6:2016EN 61753-052-6:2016 3 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normat
18、ively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by c
19、ommon modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 60793-2-50 - Optical fibres - Part 2-50: Product specifica
20、tions - Sectional specification for class B single-mode fibres EN 60793-2-50 - IEC 60794-2-50 - Optical fibre cables - Part 2-50: Indoor cables - Family specification for simplex and duplex cables for use in terminated cable assemblies EN 60794-2-50 - IEC 61300-2-1 - Fibre optic interconnecting devi
21、ces and passive components - Basic test and measurement procedures - Part 2-1: Tests - Vibration (sinusoidal) EN 61300-2-1 - IEC 61300-2-4 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-4: Tests - Fibre/cable retention EN 61300-2-4 - IEC
22、 61300-2-5 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-5: Tests - Torsion EN 61300-2-5 - IEC 61300-2-9 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-9: Tests - Shock EN 6
23、1300-2-9 - IEC 61300-2-14 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-14: Tests - High optical power EN 61300-2-14 - IEC 61300-2-19 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures -
24、 Part 2-19: Tests - Damp heat (steady state) EN 61300-2-19 - BS EN 61753-052-6:2016EN 61753-052-6:2016 4 Publication Year Title EN/HD Year IEC 61300-2-22 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-22: Tests - Change of temperature EN
25、 61300-2-22 - IEC 61300-2-42 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-42: Tests - Static side load for strain relief EN 61300-2-42 - IEC 61300-2-44 - Fibre optic interconnecting devices and passive components - Basic test and measu
26、rement procedures - Part 2-44: Tests - Flexing of the strain relief of fibre optic devices EN 61300-2-44 - IEC 61300-2-48 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-48: Tests - Temperature-humidity cycling EN 61300-2-48 - IEC 61300-3
27、-2 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-2: Examination and measurements - Polarization dependent loss in a single-mode fibre optic device EN 61300-3-2 - IEC 61300-3-3 - Fibre optic interconnecting devices and passive components
28、 - Basic test and measurement procedures - Part 3-3: Examinations and measurements - Active monitoring of changes in attenuation and return loss EN 61300-3-3 - IEC 61300-3-7 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-7: Examinations
29、and measurements - Wavelength dependence of attenuation and return loss of single mode components EN 61300-3-7 - BS EN 61753-052-6:2016 2 IEC 61753-052-6:2016 IEC 2016 CONTENTS FOREWORD 3 1 Scope .5 2 Normative references 5 3 Test 6 4 Test report 6 5 Performance requirements .6 5.1 Sample size, sequ
30、encing and grouping6 5.2 Dimensions .6 5.3 Test details and requirements .6 Annex A (normative) Test sequencing for single-mode non-connectorized fixed attenuators, category O 11 Bibliography . 12 Table 1 Test details and requirements 7 Table A.1 Test sequence for single-mode non-connectorized fixed
31、 attenuators, category O . 11 BS EN 61753-052-6:2016IEC 61753-052-6:2016 IEC 2016 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD Part 052-6: Single-mode fibre non-connectorized fixed attenuator Category O in outside plant
32、 environment FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardi
33、zation in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation i
34、s entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the
35、International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects s
36、ince each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical conte
37、nt of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possibl
38、e in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity
39、 assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors,
40、 employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out
41、of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to
42、 the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 61753-052-6 had been prepared by subcommittee 86B: Fibre optic interconnecting devices a
43、nd passive components of IEC technical committee 86: Fibre optics. The text of this standard is based on the following documents: FDIS Report on voting 86B/3995/FDIS 86B/4010/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the ab
44、ove table. BS EN 61753-052-6:2016 4 IEC 61753-052-6:2016 IEC 2016 This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all parts in the IEC 61753 series, published under the general title Fibre optic interconnecting devices and passive components Performance
45、 standard, can be found on the IEC website. Future standards in this series will carry the new general title as cited above. Titles of existing standards in this series will be updated at the time of the next edition. The committee has decided that the contents of this publication will remain unchan
46、ged until the stability date indicated on the IEC website under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. A bilingual version of this publication may be issued at a
47、 later date. BS EN 61753-052-6:2016IEC 61753-052-6:2016 IEC 2016 5 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD Part 052-6: Single-mode fibre non-connectorized fixed attenuator Category O in outside plant environment 1 Scope This part of IEC 61753 contains the mini
48、mum initial test and measurement requirements and severities which a fibre optic attenuator satisfies in order to be categorised as meeting the requirements of single-mode fibre non-connectorized fixed attenuator devices used in outside plant environments. IEC 60869-1 contains the generic specificat
49、ion of the optical attenuator. Optical performances specified in this document relate only to non-connectorized optical attenuators. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60793-2-50, Optical
