1、BSI Standards PublicationFibre optic interconnecting devices and passive components Performance standardPart 058-2: Single mode fibre pigtailed style optical power limiter for category C Controlled environmentBS EN 61753-058-2:2013National forewordThis British Standard is the UK implementation of EN
2、 61753-058-2:2013. Itis identical to IEC 61753-058-2:2013.The UK participation in its preparation was entrusted by TechnicalCommittee GEL/86, Fibre optics, to Subcommittee GEL/86/2, Fibre opticinterconnecting devices and passive components.A list of organizations represented on this committee can be
3、 obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions ofa contract. Users are responsible for its correct application. The British Standards Institution 2013Published by BSI Standards Limited 2013ISBN 978 0 580 70068 2ICS 33.180.20Compliance w
4、ith a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 July 2013.Amendments issued since publicationAmd. No. Date Text affectedBRITISH STANDARDBS EN 61753-058-2:2013EUROPEAN STAND
5、ARD EN 61753-058-2 NORME EUROPENNE EUROPISCHE NORM June 2013 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Management Centre: Avenue Marnix 17, B - 1000 Brussels 2013 CENELEC - All righ
6、ts of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 61753-058-2:2013 E ICS 33.180.20 English version Fibre optic interconnecting devices and passive components - Performance standard - Part 058-2: Single mode fibre pigtailed style optical power limiter
7、 for category C - Controlled environment (IEC 61753-058-2:2013) Dispositifs dinterconnexion et composants passifs fibres optiques - Norme de performance - Partie 058-2: Limiteur de puissance optique de type fibre amorce, fibre unimodale pour catgorie C - Environnement contrl (CEI 61753-058-2:2013) L
8、ichtwellenleiter - Verbindungselemente und passive Bauteile - Betriebsverhalten - Teil 058-2: Optischer Leistungsbegrenzer mit Anschlussfaser fr Einmodenfasern der Kategorie C - Kontrollierte Umgebung (IEC 61753-058-2:2013) This European Standard was approved by CENELEC on 2013-04-22. CENELEC member
9、s are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application
10、 to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC M
11、anagement Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland,
12、 Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 61753-058-2:2013EN 61753-058-2:2013 - 2 - Foreword The text of document 86B/3552/FDIS, future edition 1 of I
13、EC 61753-058-2, prepared by SC 86B “Fibre optic interconnecting devices and passive components” of IEC/TC 86 “Fibre optics“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61753-058-2:2013. The following dates are fixed: latest date by which the document has to be implem
14、ented at national level by publication of an identical national standard or by endorsement (dop) 2014-01-22 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2016-04-22 Attention is drawn to the possibility that some of the elements of this document
15、 may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 61753-058-2:2013 was approved by CENELEC as a European Standard without any modification. BS EN 61753-05
16、8-2:2013- 3 - EN 61753-058-2:2013 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated refe
17、rences, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title E
18、N/HD Year IEC 60869-1 - Fibre optic interconnecting devices and passive components - Fibre optic passive power control devices - Part 1: Generic specification EN 60869-1 - IEC 61300 Series Fibre optic interconnecting devices and passive components - Basic test and measurement procedures EN 61300 Ser
19、ies IEC 61300-1 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 1: General and guidance EN 61300-1 - IEC 61300-2-1 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-1: Tests - Vibr
20、ation (sinusoidal) EN 61300-2-1 - IEC 61300-2-4 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-4: Tests - Fibre/cable retention EN 61300-2-4 - IEC 61300-2-9 - Fibre optic interconnecting devices and passive components - Basic test and me
21、asurement procedures - Part 2-9: Tests - Shock EN 61300-2-9 - IEC 61300-2-14 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-14: Tests - High optical power EN 61300-2-14 - IEC 61300-2-17 - Fibre optic interconnecting devices and passive c
22、omponents - Basic test and measurement procedures - Part 2-17: Tests - Cold EN 61300-2-17 - IEC 61300-2-18 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-18: Tests - Dry heat - High temperature endurance EN 61300-2-18 - IEC 61300-2-19 -
23、Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-19: Tests - Damp heat (steady state) EN 61300-2-19 - BS EN 61753-058-2:2013EN 61753-058-2:2013 - 4 - Publication Year Title EN/HD Year IEC 61300-2-22 - Fibre optic interconnecting devices and
24、passive components - Basic test and measurement procedures - Part 2-22: Tests - Change of temperature EN 61300-2-22 - IEC 61300-2-42 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-42: Tests - Static side load for connectors EN 61300-2-42
25、 - IEC 61300-3-2 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-2: Examinations and measurements - Polarization dependent loss in a single-mode fibre optic device EN 61300-3-2 - IEC 61300-3-3 - Fibre optic interconnecting devices and pas
26、sive components - Basic test and measurement procedures - Part 3-3: Examinations and measurements - Active monitoring of changes in attenuation and return loss EN 61300-3-3 - IEC 61300-3-4 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-4
27、: Examinations and measurements - Attenuation EN 61300-3-4 - IEC 61300-3-6 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-6: Examinations and measurements - Return loss EN 61300-3-6 - IEC 61300-3-7 - Fibre optic interconnecting devices a
28、nd passive components - Basic test and measurement procedures - Part 3-7: Examinations and measurements - Wavelength dependence of attenuation and return loss of single mode components EN 61300-3-7 - IEC 61300-3-32 - Fibre optic interconnecting devices and passive components - Basic test and measure
29、ment procedures - Part 3-32: Examinations and measurements - Polarisation mode dispersion measurement for passive optical components EN 61300-3-32 - BS EN 61753-058-2:2013 2 61753-058-2 IEC:2013 CONTENTS INTRODUCTION . 5 1 Scope . 6 2 Normative references . 6 3 Tests 7 4 Test reports 7 5 Performance
30、 requirements . 7 5.1 Sample size, sequencing and grouping 7 5.2 Dimensions . 7 5.3 Test details and requirements . 8 Annex A (normative) Sample size and product sourcing requirements . 14 Annex B (normative) Plimitdefinition 15 Annex C (normative) Response time definition . 16 Annex D (normative) M
31、aximum allowed power input for optical limiters, single-mode . 17 Annex E (informative) Example of dimensions for optical limiters . 18 Annex F (normative) Testing of optical limiters . 19 Figure B.1 Measurements of Poutas a function of Pin15 Figure C.1 Definition of response time . 16 Figure E.1 Op
32、tical limiter, in-line configuration, regularly without connectors 18 Figure F.1 PlimitTest set-up schematics 19 Figure F.2 Response time testing set-up 20 Table 1 Performance requirements for optical power limitersn (1 of 6) . 8 Table A.1 Sample size and product sourcing requirements 14 Table D.1 M
33、aximum allowed power input for optical limiters, single-mode 17 BS EN 61753-058-2:201361753-058-2 IEC:2013 5 INTRODUCTION 1) The International Electrotechnical Commission (IEC) draws attention to the fact that it is claimed that compliance with this document may involve the use of a patent concernin
34、g power limiters, registered as follows: Country Patent number Israel 147554 European Union EP 1467239 A2 USA USP110/398859 Japan 4587695 Canada 24649043 IEC takes no position concerning the evidence, validity and scope of this patent right. The holder of this patent right has assured the IEC that h
35、e/she is willing to negotiate licences under reasonable and non-discriminatory terms and conditions with applicants throughout the world. In this respect, the statement of the holder of this patent right is registered with IEC. Information may be obtained from: KiloLambda technologies, Ltd. 22a Raou
36、l Wallenberg street, Tel-Aviv 69719, Israel Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights other than those identified above. IEC shall not be held responsible for identifying any or all such patent rights. ISO (www.iso.org/patent
37、s) and IEC (http:/patents.iec.ch) maintain on-line data bases of patents relevant to their standards. Users are encouraged to consult the data bases for the most up to date information concerning patents. 2) The optical power limiter is a passive device that regulates the optical power in fibres, pr
38、oducing a controlled, constant output power Plimit, as a result of varying input power higher than Plimit, and has no influence at powers below Plimit. Under normal operation, when the input power is low, the optical power limiter has no effect on the system. However, when the input power is high, t
39、he optical output power is limited to a predetermined level (Plimit).The optical limiter is wavelength independent over its entire specified spectral range. IEC 60869-1 contains the generic information of the optical power limiter. The optical power limiter is used at the input of power-sensitive eq
40、uipment and at the output of high power devices, such as amplifiers, or wherever power regulation is required. The optical power limiter can serve as an eye safety device. The optical power limiter has a maximal allowed optical power Pin max. Above this power the optical limiter can melt down and op
41、en a through path for light. Numerical values for Pin max are given in Annex D. BS EN 61753-058-2:2013 6 61753-058-2 IEC:2013 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS PERFORMANCE STANDARD Part 058-2: Single mode fibre pigtailed style optical power limiter for category C Controlled
42、environment 1 Scope This part of IEC 61753 contains the minimum initial test and measurement requirements and severities which an optical power limiter needs to satisfy in order to be categorized as meeting the requirements of single mode fibre pigtailed style optical power limiter used in controlle
43、d environments. Optical performance specified in this standard relates to in-line type configuration power limiters only. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references,
44、only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60869-1, Fibre optic interconnecting devices and passive components Fibre optic passive power control devices Part 1: Generic specification IEC 61300 (all par
45、ts), Fibre optic interconnecting devices and passive components Basic test and measurement procedures IEC 61300-1, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 1: General and guidance IEC 61300-2-1, Fibre optic interconnecting devices and pass
46、ive components Basic test and measurement procedures Part 2-1: Tests Vibration (sinusoidal) IEC 61300-2-4, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-4: Tests Fibre/cable retention IEC 61300-2-9, Fibre optic interconnecting devices and pas
47、sive components Basic test and measurement procedures Part 2-9: Tests Shock IEC 61300-2-14, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-14: Tests High optical power IEC 61300-2-17, Fibre optic interconnecting devices and passive components
48、Basic test and measurement procedures Part 2-17: Tests Cold IEC 61300-2-18, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-18: Tests Dry heat High temperature endurance IEC 61300-2-19, Fibre optic interconnecting devices and passive components
49、 Basic test and measurement procedures Part 2-19: Tests Damp heat (steady state) BS EN 61753-058-2:201361753-058-2 IEC:2013 7 IEC 61300-2-22, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-22: Tests Change of temperature IEC 61300-2-42, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-42: Tests Static side load for connectors I
