1、BSI Standards PublicationFibre optic interconnecting devices and passive components Performance standardPart 088-2: Non-connectorized single-mode fibre optic LAN WDM devices with channel spacing of 800 GHz for category C Controlled environmentsBS EN 61753-088-2:2013National forewordThis British Stan
2、dard is the UK implementation of EN 61753-088-2:2013. Itis identical to IEC 61753-088-2:2013. It supersedes DD IEC/PAS 61753-088-2:2010 which is withdrawn.The UK participation in its preparation was entrusted by TechnicalCommittee GEL/86, Fibre optics, to Subcommittee GEL/86/2, Fibre opticinterconne
3、cting devices and passive components.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions ofa contract. Users are responsible for its correct application. The British Standards Insti
4、tution 2013Published by BSI Standards Limited 2013ISBN 978 0 580 71067 4ICS 33.180.20Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 July 2013.Amendments issued
5、 since publicationAmd. No. Date Text affectedBRITISH STANDARDBS EN 61753-088-2:2013EUROPEAN STANDARD EN 61753-088-2 NORME EUROPENNE EUROPISCHE NORM June 2013 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektro
6、technische Normung Management Centre: Avenue Marnix 17, B - 1000 Brussels 2013 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 61753-088-2:2013 E ICS 33.180.20 English version Fibre optic interconnecting devices and passive compon
7、ents -Performance standard - Part 088-2: Non-connectorized single-mode fibre optic LAN WDM devices with channel spacing of 800 GHz for category C - Controlled environments (IEC 61753-088-2:2013) Dispositifs dinterconnexion et composants passifs fibres optiques - Norme de performance - Partie 088-2:
8、Dispositifs LAN WDM fibres optiques unimodales, non connectoriss, avec un espacement entre canaux de 800 GHz, pour catgorie C - Environnements contrls (CEI 61753-088-2:2013) Lichtwellenleiter - Verbindungselemente und passive Bauteile - Betriebsverhalten - Teil 088-2: Nicht mit Steckverbindern verse
9、hene Einmoden LWL-LAN-WDM-Gerte mit Kanalweiten von 800 GHz fr Kategorie C - Kontrollierte Umgebung (IEC 61753-088-2:2013) This European Standard was approved by CENELEC on 2013-04-22. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for gi
10、ving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in thre
11、e official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national elect
12、rotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Rom
13、ania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. BS EN 61753-088-2:2013EN 61753-088-2:2013 - 2 - Foreword The text of document 86B/3549/FDIS, future edition 1 of IEC 61753-088-2, prepared by SC 86B “Fibre optic interconnecting devices and passive components” of IE
14、C/TC 86 “Fibre optics“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61753-088-2:2013. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2014
15、-01-22 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2016-04-22 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifyin
16、g any or all such patent rights. Endorsement notice The text of the International Standard IEC 61753-088-2:2013 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 61
17、300-3-2 NOTE Harmonised as EN 61300-3-2. IEC 61753-021-2 NOTE Harmonised as EN 61753-021-2. BS EN 61753-088-2:2013- 3 - EN 61753-088-2:2013 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in p
18、art, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE When an international publication has been
19、modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 60793-2-50 - Optical fibres - Part 2-50: Product specifications - Sectional specification for class B single-mode fibres EN 60793-2-50 - IEC 61300 Series Fibre optic interconnectin
20、g devices and passive components - Basic test and measurement procedures EN 61300 Series IEC 61300-2-1 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-1: Tests - Vibration (sinusoidal) EN 61300-2-1 - IEC 61300-2-4 - Fibre optic interconne
21、cting devices and passive components - Basic test and measurement procedures - Part 2-4: Tests - Fibre/cable retention EN 61300-2-4 - IEC 61300-2-9 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-9: Tests - Shock EN 61300-2-9 - IEC 61300-
22、2-17 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-17: Tests - Cold EN 61300-2-17 - IEC 61300-2-18 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-18: Tests - Dry heat - High
23、 temperature endurance EN 61300-2-18 - IEC 61300-2-19 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-19: Tests - Damp heat (steady state) EN 61300-2-19 - IEC 61300-2-22 - Fibre optic interconnecting devices and passive components - Basic
24、 test and measurement procedures - Part 2-22: Tests - Change of temperature EN 61300-2-22 - IEC 61300-2-42 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 2-42: Tests - Static side load for connectors EN 61300-2-42 - BS EN 61753-088-2:2013E
25、N 61753-088-2:2013 - 4 - Publication Year Title EN/HD Year IEC 61300-3-7 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-7: Examinations and measurements - Wavelength dependence of attenuation and return loss of single mode components EN
26、61300-3-7 - IEC 61300-3-20 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-20: Examinations and measurements - Directivity of fibre optic branching devices EN 61300-3-20 - IEC 61300-3-28 - Fibre optic interconnecting devices and passive c
27、omponents - Basic test and measurement procedures - Part 3-28: Examinations and measurements - Transient loss EN 61300-3-28 - IEC 61300-3-29 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-29: Examinations and measurements - Measurement t
28、echniques for characterising the amplitude of the spectral transfer function of DWDM components EN 61300-3-29 - IEC 61753-1 2007 Fibre optic interconnecting devices and passive components performance standard - Part 1: General and guidance for performance standards EN 61753-1 2007 IEC 62074-1 - Fibr
29、e optic interconnecting devices and passive components - Fibre optic WDM devices - Part 1: Generic specification EN 62074-1 - ITU-T Recommendation G.959.1 - Optical transport network physical layer interfaces - - IEEE P802.3ba - Carrier Sense Multiple Access with Collision Detection (CSMA/CD) Access
30、 Method and Physical Layer Specifications - - BS EN 61753-088-2:2013 2 61753-088-2 IEC:2013 CONTENTS 1 Scope . 6 2 Normative references . 6 3 Terms and definitions . 7 4 Test conditions . 8 5 Test report 8 6 Reference components . 9 7 Performance requirements . 9 7.1 Channel requirements . 9 7.2 Dim
31、ensions . 9 7.3 Test details and requirements . 9 Annex A (normative) Sample size 15 Annex B (informative) Logarithmic transfer matrix for an integrated 1 4 LAN WDM device . 16 Annex C (informative) Logarithmic transfer matrix for an individual 1 2 LAN WDM device . 18 Annex D (informative) General i
32、nformation for applications of integrated 1 4 LAN WDM devices 22 Annex E (informative) General information for internal configurations of integrated 1 4 LAN WDM devices . 23 Bibliography 25 Figure 1 Configuration of integrated 1 4 LAN WDM device 8 Figure 2 Configuration of individual 1 2 LAN WDM dev
33、ice . 8 Figure D.1 Block diagram for 100GBASE-LR4 and 100GBASE-ER4 transmit/receive paths 22 Figure E.1 Configuration example of serial-type integrated 1 4 LAN WDM device (DEMUX) 23 Figure E.2 Configuration example of serial-type integrated 1 4 LAN WDM device (MUX) . 23 Figure E.3 Configuration exam
34、ple of tree-type integrated 1 4 LAN WDM device (MUX/DEMUX) 24 Table 1 Channel requirements . 9 Table 2 Test details and requirements . 10 Table A.1 Number of samples for each test 15 Table B.1 Logarithmic transfer matrix for channel 1: Frequency range of 231,584 231,216 THz (1 294,53 1 296,59 nm) 16
35、 Table B.2 Logarithmic transfer matrix for channel 2: Frequency range of 230,784 230,416 THz (1 299,02 1 301,09 nm) 16 Table B.3 Logarithmic transfer matrix for channel 3: Frequency range of 229,984 229,616 THz (1 303,54 1 305,63 nm) 16 Table B.4 Logarithmic transfer matrix for channel 4: Frequency
36、range of 229,184 228,816 THz (1 308,09 1 310,19 nm) 17 BS EN 61753-088-2:201361753-088-2 IEC:2013 3 Table C.1 Logarithmic transfer matrix for channel 1: Frequency range of 231,584 231,216 THz (1 294,53 1 296,59 nm) 18 Table C.2 Logarithmic transfer matrix for channel 2: Frequency range of 230,784 23
37、0,416 THz (1 299,02 1 301,09 nm) 18 Table C.3 Logarithmic transfer matrix for channel 3: Frequency range of 229,984 229,616 THz (1 303,54 1 305,63 nm) 18 Table C.4 Logarithmic transfer matrix for channel 4: Frequency range of 229,184 228,816 THz (1 308,09 1 310,19 nm) 18 Table C.5 Logarithmic transf
38、er matrix for channel 1: Frequency range of 231,584 231,216 THz (1 294,53 1 296,59 nm) 19 Table C.6 Logarithmic transfer matrix for channel 2: Frequency range of 230,784 230,416 THz (1 299,02 1 301,09 nm) 19 Table C.7 Logarithmic transfer matrix for channel 3: Frequency range of 229,984 229,616 THz
39、(1 303,54 1 305,63 nm) 19 Table C.8 Logarithmic transfer matrix for channel 4: Frequency range of 229,184 228,816 THz (1 308,09 1 310,19 nm) 19 Table C.9 Logarithmic transfer matrix for channel 1: Frequency range of 231,584 231,216 THz (1 294,53 1 296,59 nm) 19 Table C.10 Logarithmic transfer matrix
40、 for channel 2: Frequency range of 230,784 230,416 THz (1 299,02 1 301,09 nm) 20 Table C.11 Logarithmic transfer matrix for channel 3: Frequency range of 229,984 229,616 THz (1 303,54 1 305,63 nm) 20 Table C.12 Logarithmic transfer matrix for channel 4: Frequency range of 229,184 228,816 THz (1 308,
41、09 1 310,19 nm) 20 Table C.13 Logarithmic transfer matrix for channel 1: Frequency range of 231,584 231,216 THz (1 294,53 1 296,59 nm) 20 Table C.14 Logarithmic transfer matrix for channel 2: Frequency range of 230,784 230,416 THz (1 299,02 1 301,09 nm) 20 Table C.15 Logarithmic transfer matrix for
42、channel 3: Frequency range of 229,984 229,616 THz (1 303,54 1 305,63 nm) 21 Table C.16 Logarithmic transfer matrix for channel 4: Frequency range of 229,184 228,816 THz (1 308,09 1 310,19 nm) 21 BS EN 61753-088-2:2013 6 61753-088-2 IEC:2013 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS
43、PERFORMANCE STANDARD Part 088-2: Non-connectorized single-mode fibre optic LAN WDM devices with channel spacing of 800 GHz for category C Controlled environments 1 Scope This part of IEC 61753 contains the minimum initial test and measurement requirements and severities which a non-connectorized sin
44、gle-mode fibre optic Local Area Network Wavelength Division Multiplexing (LAN WDM) device with channel spacing of 800 GHz needs to satisfy in order to be categorized as meeting the requirements of Category C Controlled environments, as defined in Annex A of IEC 61753-1:2007. The applications of LAN
45、WDM devices are optical MUX and DEMUX for 100GBASE-LR4 (required operating range of 2 m to 10 km) and 100GBASE-ER4 (required operating range of 2 m to 30 km) defined in IEEE P802.3ba, as shown in Annex D. The requirements cover both an integrated 1 4 LAN WDM device and an individual 1 2 LAN WDM devi
46、ce for cascaded module construction. 2 Normative references The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the ref
47、erenced document (including any amendments) applies. IEC 60793-2-50, Optical fibres Part 2-50: Product specifications Sectional specification for class B single-mode fibres1IEC 61300 (all parts), Fibre optic interconnecting devices and passive components Basic test and measurement procedures IEC 613
48、00-2-1, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-1: Tests Vibration (sinusoidal) IEC 61300-2-4, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-4: Tests Fibre/cable retention IEC 61
49、300-2-9, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-9: Tests Shock IEC 61300-2-17, Fibre optic interconnecting devices and passive components Basic test and measurement procedures Part 2-17: Tests Cold IEC 61300-2-18, Fibre optic interconnecting devices an
