1、BRITISH STANDARDBS EN 61754-23:2005Fibre optic connector interfaces Part 23: Type LX.5 connector familyThe European Standard EN 61754-23:2005 has the status of a British StandardICS 33.180.20g49g50g3g38g50g51g60g44g49g42g3g58g44g55g43g50g56g55g3g37g54g44g3g51g40g53g48g44g54g54g44g50g49g3g40g59g38g40
2、g51g55g3g36g54g3g51g40g53g48g44g55g55g40g39g3g37g60g3g38g50g51g60g53g44g42g43g55g3g47g36g58BS EN 61754-23:2005This British Standard was published under the authority of the Standards Policy and Strategy Committee on 14 November 2005 BSI 14 November 2005ISBN 0 580 46709 0National forewordThis British
3、 Standard is the official English language version of EN 61754-23:2005. It is identical with IEC 61754-23:2005.The UK participation in its preparation was entrusted by Technical Committee GEL/86, Fibre optics, to Subcommittee GEL/86/2, Fibre optic interconnecting devices and passive components, whic
4、h has the responsibility to: aid enquirers to understand the text; present to the responsible international/European committee any enquiries on the interpretation, or proposals for change, and keep UK interests informed; monitor related international and European developments and promulgate them in
5、the UK.A list of organizations represented on this subcommittee can be obtained on request to its secretary.Cross-referencesThe British Standards which implement international or European publications referred to in this document may be found in the BSI Catalogue under the section entitled “Internat
6、ional Standards Correspondence Index”, or by using the “Search” facility of the BSI Electronic Catalogue or of British Standards Online.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.Compliance with a British
7、 Standard does not of itself confer immunity from legal obligations.Summary of pagesThis document comprises a front cover, an inside front cover, the EN title page, pages 2 to 17 and a back cover.The BSI copyright notice displayed in this document indicates when the document was last issued.Amendmen
8、ts issued since publicationAmd. No. Date CommentsEUROPEAN STANDARD EN 61754-23 NORME EUROPENNE EUROPISCHE NORM September 2005 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secre
9、tariat: rue de Stassart 35, B - 1050 Brussels 2005 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 61754-23:2005 E ICS 33.180.20 English version Fibre optic connector interfaces Part 23: Type LX.5 connector family (IEC 61754-23:20
10、05) Interfaces de connecteurs pour fibres optiques Partie 23: Famille de connecteurs de type LX.5 (CEI 61754-23:2005) Steckgesichter von Lichtwellenleiter-Steckverbindern Teil 23: Steckverbinderfamilie der Bauart LX.5 (IEC 61754-23:2005) This European Standard was approved by CENELEC on 2005-07-01.
11、CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained
12、on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central S
13、ecretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Cyprus, Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, Netherlands,
14、Norway, Poland, Portugal, Slovakia, Slovenia, Spain, Sweden, Switzerland and United Kingdom. 2 Foreword The text of document 86B/2108/FDIS, future edition 1 of IEC 61754-23, prepared by SC 86B, Fibre optic interconnecting devices and passive components, of IEC TC 86, Fibre optics, was submitted to t
15、he IEC-CENELEC parallel vote and was approved by CENELEC as EN 61754-23 on 2005-07-01. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2006-04-01 latest date by which the nati
16、onal standards conflicting with the EN have to be withdrawn (dow) 2008-07-01 _ Endorsement notice The text of the International Standard IEC 61754-23:2005 was approved by CENELEC as a European Standard without any modification. _ EN 61754-23:2005 3 CONTENTS 1 Scope.4 2 Description .43 Interfaces .4F
17、igure 1 Plug connector interface reference planes 5 Figure 1a Detail A of Figure 1 PC polish plug connector interface Expanded view drawing not-to-scale5 Figure 1b Detail A of Figure 1 APC polish plug connector interface Expanded view drawings not-to-scale 6 Figure 2 Plug connector interface .9 Figu
18、re 3 APC plug connector interface Expanded view from front.10 Figure 4 Duplex plug interface10 Figure 5 Simplex adaptor interface .13 Figure 6 Duplex adaptor port interface15 Figure 7 Pin gauge for adaptor .17 Table 1 Dimensions of the PC polished end face 5 Table 2 Dimensions of the APC polished en
19、d face 7 Table 3 Dimensions of the plug connector interface 11 Table 4 Plug connector interface Ferrule grade12 Table 5 Dimensions of the adaptor interface.16 EN 61754-23:2005 4 FIBRE OPTIC CONNECTOR INTERFACES Part 23: Type LX.5 connector family 1 Scope This part of IEC 61754 defines the standard i
20、nterface dimensions for the type LX.5 family of connectors. 2 Description The parent connector for the type LX.5 connector family is a single position plug connector set of plug/adaptor configuration which is characterized by a 1,25 mm nominal diameter ferrule. The connector includes a single coupli
21、ng latch and a ferrule spring loaded in the direction of the optical axis. The plug has a single male key, which may be used to orient and limit the relative position between the connector and the component to which it is mated. The optical alignment mechanism of the connectors is of a resilient sle
22、eve style. 3 Interfaces The subsequent pages define the standard interfaces for the type LX.5 connector family. This document contains the following standard interfaces. Interface 23-1: Simplex plug connector interface PC Interface 23-2: Simplex adaptor connector interface Interface 23-3: Duplex plu
23、g connector interface PC Interface 23-4: Duplex adaptor connector interface Iinterface 23-5: Simplex plug connector interface APC 8 Interface 23-6: duplex plug connector interface APC 8 The following plugs and adaptors are intermateable. Adaptors Interfaces Plugs (polishing condition) 61754-23-2 617
24、54-23-4 Interface 23-1 Mate Mate Interface 23-3 Not mate Mate Interface 23-5 Mate Mate Interface 23-6 Not mate Mate Adaptors interfaces Plugs (polishing condition) 61754-23-1 61754-23-3 61754-23-5 61754-23-6 Interface 23-1 Mate Mate Not mate Not mate Interface 23-3 Mate Mate Not mate Not mate Interf
25、ace 23-5 Not mate Not mate Mate Mate Interface 23-6 Not mate Not mate Mate Mate EN 61754-23:2005 5 Optical reference plane Detail A Optical datum target AA Mechanical reference plane IEC 639/05 NOTE Shown without shutter to make features more visible (see Figure 2b for shutter details) Figure 1 Plug
26、 connector interface reference planes The plug of interface 23-1 and interface 23-3 has a ferrule with a spherically polished endface, and realizes physical contact (PC). Table 1 Dimensions of the PC polished end face Dimensions mm Reference Minimum Maximum Notes A - - Diameter, see Table 4 AE 0,6 0
27、,85 Pedestal diameter AF 7 25 RadiusAG 32,5 37,5 DegreesAG AFAEA See Note 3 of Table 3 IEC 640/05 Figure 1a Detail A of Figure 1 PC polish plug connector interface Expanded view drawing not-to-scale EN 61754-23:2005 6 The plug of interface 23-5 and interface 23-6 has a ferrule with a spherically pol
28、ished angled endface which may take any of the APC forms shown in detail A of Figure 1 and realizes a physical contact. AGAH AAISee Note 3of Table 3 A AJ AI See Note 3 of Table 3 IEC 641/05 IEC 642/05 Figure 1b)1 APC polish, stepped Figure 1b)2 APC polish conical EOEBrEPAngled PC reference plane Ver
29、texIEC 643/05 Figure 1b)3 APC ferrule endface geometry AN IEC 644/05 Figure 1b)4 Top view Figure 1b Detail A of Figure 1 APC polish plug connector interface Expanded view drawings not-to-scale EN 61754-23:2005 7 Table 2 Dimensions of the APC polished end face Dimensions mm Reference Minimum Maximum
30、Notes A - - Diameter, see table 4 AG 32,5 37,5 Degrees AH 0,6 0,85 Pedestal diameter AI 5 12 RadiusEB 8 Degrees, basic dimension EO 0 0.07 See Note 2 of Table 3 EP 5 12 Radius AJ 0,6 0,7 Pedestal diameter AN 8 Degrees, basic dimension EN 61754-23:2005 8 Mechanical reference plane BB BC BD BEBFBTBGBH
31、BI BJ BK BLBM BNBP BQ BS BR BZ B A A B0,0250,1 BB0,05 0,025 A BBWBVBUIEC 645/05 Figure 2a Plug connector interface section A-A EN 61754-23:2005 9 CACC CB CFBQ CG BI CD CEB 0,025 IEC 646/05 Figure 2b Plug connector interface shutter Figure 2 Plug connector interface EN 61754-23:2005 10 Plane A AM Gui
32、de key Plane B Ferrule IEC 647/05 Figure 3 APC plug connector interface Expanded view DD IEC 648/05Figure 4 Duplex plug interface EN 61754-23:2005 11 Table 3 Dimensions of the plug connector interface Dimensions mm References Minimum Maximum Notes A Diameter, see Table 4 AA (free) 12,95 13,3 Note 1
33、AE 0,6 0,85 Pedestal diameter AF 7 25 Radius, Note 4 AG 32,5 37,5 DegreesAH 0,6 0,85 Pedestal diameter AI 5,0 12,0 Radius, Note 4 AJ 0,6 0,7 Diameter AM 90 Basic dimension, degree, Note 5 AN 8 Basic dimension, degrees BB 11,97 12,08 BC 9,1 10,1 BD 7,2 8,46 BE 1,4 3,4 BF 1,47 1,6 BG 1,17 2,17 BH 8,0
34、8,34 BI 7,42 7,68 BJ 7,0 7,32 BK 4,8 5,14 BL 3,38 3,64 BM 1,95 2,20 BN 1,02 1,08 BP 4,97 5,03 BQ 3,90 4,014 BR 0,9 1,8 BS 3,65 3,76 BT 0 5,5 DegreesBU 2,54 2,70 Diameter BV 3,2 4,40 BW 0,0 0,34 RadiusBZ 2,286 Basic dimension CA 4,38 4,7 Corner CB 1,94 2,3 Corner CC 3.10 3,64 CD 3,37 3,45 CE 2,48 2,5
35、9 CF 11,0 12,39 CG 4, 4,53 RadiusDD 5,99 Basic dimension EN 61754-23:2005 12 Table 3 (continued) NOTE 1 Dimension AA is given for a finished plug endface after all polishing. The maximum is limited by the shutter. The ferrule is movable by a certain axial compressing force, with direct contacting en
36、dface, and therefore dimension AA is variable. Ferrule compression force must be 3,5 N to 6,0 N when the optical datum target, dimension AA is moved to the range 12,90 mm to 12,50 mm; NOTE 2 Dome eccentricity of the spherically polished endface must be less than 70 m. NOTE 3 A chamfer or radius is a
37、llowed to a maximum depth of 0,5 mm from the ferrule endface; NOTE 4 These dimensional requirements apply to the finished ferrule, after all polishing procedures have been completed. NOTE 5 Dimension AM is defined as an angle between two planes: One plane, plane A, passes through the axis of the fer
38、rule and the axis of symmetry of the key of the angled endface connector plug. The other plane, plane B, passes through the axis of the ferrule and the plane normal to the angled PC reference plane. Table 4 Plug connector interface Ferrule grade A (diameter) mm Grade Minimum Maximum Notes 1 1,2485 1
39、,2495 2 1,2483 1,2495 3 1,2467 1,2495 NOTE The ferrule material is zirconia ceramic. Alternative materials may be used for the ferrule, that have directly compatible material properties with zirconia, but the endface performance requirements must be met under all conditions. EN 61754-23:2005 13 IEC
40、649/05 B B A A D C BH BM BN EA BZEFBS 0,050,025 0,10 C C C BQBRBP M M M Figure 5 Simplex adaptor interface EN 61754-23:2005 14 Optical reference plane Mechanical reference plane AA EDBT BG BF1BF2 BCBB BK BJ ECEJ BUEE BI BVX A Adapter door container C D M C D M 0,05 0,025 IEC 650/05 X Figure 5a Secti
41、on A-A BEBLEKIEC 651/05 Figure 5b Section B-B EG E EHIEC 652/05 Figure 5c Section X-X EN 61754-23:2005 15 BP BP B A DDBNBNB 0,05 MA0,05 MA B IEC 653/05 NOTE A duplex adaptor shall comply with all of the dimensions of this drawing and of Figure 5. Figure 6 Duplex adaptor port interface EN 61754-23:20
42、05 16 Table 5 Dimensions of the adaptor interface Dimensions mm Notes Reference Minimum Maximum A - - Diameter, Notes 1, 2 AA 12,63 12,8 Note 3 BB 12,13 12,80 2 places BC 10,5 12,80 BE 3,41 3,51 BF1 1,6 1,8 BF2 1,62 1,75 BG 0,90 1,16 BH 8,3 8,43 BI 7,68 7,93 Note 3 BJ 7,23 7,37 BK 5,41 5,72 BL 3,65
43、3,7 BM 1,8 1,94 BN 1,08 1,16 BP 5,08 5,11 BQ 4,064 4,34 BR 2,03 2,54 BS 3,86 4 BT 5,5 10,0 DegreesBU 2,34 2,47 Diameter BV 3,0 3,2 BZ 2,286 Basic dimension DD 5,99 Basic dimensiE 0,43 0,59 EA 0,08 0,30 EC 0,71 0,97 ED 12,4 12,80 Note 4 EE 3,36 5,14 EF 1,0 1,45 2 placesEG 2,48 3,48 EH 1,47 2,47 EK 0,
44、96 1,02 Diameter EJ 1,42 1,55 Diameter NOTE 1 The connector alignment feature is a resilient (split) alignment sleeve, and the sleeve may be either fixed or floating. For a fixed sleeve the positional tolerance of dimension BU applies to both BU and A dimensions. For a floating sleeve, a gauge pin i
45、nserted in the sleeve must be capable of moving freely into a position such that it is coincident with datum AA. Dimension A defines the inner diameter of the alignment feature. NOTE 2 The connector alignment feature is a resilient (split) alignment sleeve. The feature must accept a pin gauge to the
46、 centre of the adaptor with a force of 1,0 N to 2,5 N under the condition that another pin gauge is inserted into the feature from the other side until both pin gauges butt against each other. The pin gauge must be 1,2490 mm. The centre of the adaptor is defined by the left side position of dimensio
47、n AA. See Figure 7 for specifications of the pin gauge retention force of the adaptor sleeve. NOTE 3 Area used by adaptor door when plug is fully inserted. NOTE 4 The wall defined by dimension ED is not required. EN 61754-23:2005 17 0,0005 Chanfer or radius CN CK E IEC 654/05 Reference Dimension mm
48、Notes Minimum Maximum CK 1,2488 1,2492 Diameter, Notes 1, 2 CN 4,2 15 NOTE 1 A chamfer or radius is allowed to a maximum depth of 0,5 mm from the gauge endface. NOTE 2 Surface roughness should be 0,2 m Ra. Figure 7 Pin gauge for adaptor _ EN 61754-23:2005BS EN 61754-23:2005BSI389 Chiswick High RoadL
49、ondonW4 4ALBSI British Standards InstitutionBSI is the independent national body responsible for preparing British Standards. It presents the UK view on standards in Europe and at the international level. It is incorporated by Royal Charter.RevisionsBritish Standards are updated by amendment or revision. Users of British Standards should make sure that they poss
