1、BSI Standards PublicationFibre optic interconnecting devices and passive components Fibre optic connector interfacesPart 6-100: Type MU connector family Simplified receptacle MU-PC connector interfacesBS EN 61754-6-100:2016National forewordThis British Standard is the UK implementation of EN 61754-6
2、-100:2016. It is identical to IEC 61754-6-100:2015. It supersedes BS EN 61754-6-1:2003which is withdrawn.The UK participation in its preparation was entrusted by TechnicalCommittee GEL/86, Fibre optics, to Subcommittee GEL/86/2, Fibre opticinterconnecting devices and passive components.A list of org
3、anizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions ofa contract. Users are responsible for its correct application. The British Standards Institution 2016.Published by BSI Standards Limited 201
4、6ISBN 978 0 580 85899 4ICS 33.180.20 Compliance with a British Standard cannot confer immunity fromlegal obligations.T h i s B r i t i s h S t a n d a r d w a s p u b l i s h e d u n d e r t h e a u t h o r i t y o f t h eS t a n d a r d s P o l i c y a n d S t r a t e g y C o m m i t t e e o n 31 M
5、arch 2 0 1 6 .Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 61754-6-100:2016EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 61754-6-100 March 2016 ICS 33.180.20 Supersedes EN 61754-6-1:2003 English Version Fibre optic interconnecting devices and passive c
6、omponents - Fibre optic connector interfaces - Part 6-100: Type MU connector family - Simplified receptacle MU-PC connector interfaces (IEC 61754-6-100:2015) Dispositifs dinterconnexion et composants passifs fibres optiques - Interfaces de connecteurs fibres optiques - Partie 6-100: Famille de conne
7、cteurs de type MU - Interfaces de connecteur MU-PC embase simplifie (IEC 61754-6-100:2015) Lichtwellenleiter - Verbindungselemente und passive Bauteile - Steckgesichter von Lichtwellenleiter-Steckverbindern - Teil 6-100: Steckverbinderfamilie der Bauart MU - Steckgesichter von vereinfachten MU-PC-An
8、schlussbuchsen (IEC 61754-6-100:2015) This European Standard was approved by CENELEC on 2015-12-10. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
9、 Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made b
10、y translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Repu
11、blic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom.
12、European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CENELEC All rights of exploitation in any form and by any means reserved worl
13、dwide for CENELEC Members. Ref. No. EN 61754-6-100:2016 E BS EN 61754-6-100:2016EN 61754-6-100:2016 2 European foreword The text of document 86B/3939/FDIS, future edition 1 of IEC 61754-6-100, prepared by SC 86B “Fibre optic interconnecting devices and passive components“ of IEC/TC 86 “Fibre optics“
14、 was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61754-6-100:2016. The following dates are fixed: latest date by which the document has to be implemented atnational level by publication of an identical nationalstandard or by endorsement(dop) 2016-09-18 latest date by whi
15、ch the national standards conflicting withthe document have to be withdrawn(dow) 2016-12-10 This document supersedes EN 61754-6-1:2003. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsib
16、le for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 61754-6-100:2015 was approved by CENELEC as a European Standard without any modification. BS EN 61754-6-100:2016EN 61754-6-100:2016 3 Annex ZA (normative) Normative references to internati
17、onal publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of th
18、e referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is availab
19、le here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 61300-3-22 - Fibre optic interconnecting devices and passive components - Basic test and measurement procedures - Part 3-22: Examinations and measurements - Ferrule compression force EN 61300-3-22 - IEC 61754-6 2013 Fibre optic interconn
20、ecting devices and passive components - Fibre optic connector interfaces - Part 6: Type MU connector family EN 61754-6 2013 IEC 61755-3-1 - Fibre optic connector optical interfaces - Part 3-1: Optical interface, 2,5 mm and 1,25 mm diameter cylindrical full zirconia PC ferrule, single mode fibre EN 6
21、1755-3-1 - BS EN 61754-6-100:2016 2 IEC 61754-6-100:2015 IEC 2015 CONTENTS FOREWORD . 31 Scope 52 Normative references 53 Description 54 Interfaces 64.1 General . 64.2 Intermateability . 64.3 Interfaces and dimensions 6Annex A (informative) Example of an intermateable set including a simplified rece
22、ptacle . 12Bibliography 13Figure 1 Simplified receptacle housing interface 7Figure 2 Pin gauge for adaptor . 9Figure 3 Simplified plug interface . 10Figure A.1 Example of an intermateable set including a simplified receptacle 12Table 1 Intermateability of the interface . 6Table 2 Dimensions of the s
23、implified receptacles housings interface 8Table 3 Grade of the simplified receptacles housings interface 8Table 4 Pin gauge dimensions . 9Table 5 Dimensions of the simplified plug interface 11Table 6 Grade of the simplified plug interface 11BS EN 61754-6-100:2016IEC 61754-6-100:2015 IEC 2015 3 INTER
24、NATIONAL ELECTROTECHNICAL COMMISSION _ FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS FIBRE OPTIC CONNECTOR INTERFACES Part 6-100: Type MU connector family Simplified receptacle MU-PC connector interfaces FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide orga
25、nization for standardization comprisingall national electrotechnical committees (IEC National Committees). The object of IEC is to promoteinternational co-operation on all questions concerning standardization in the electrical and electronic fields. Tothis end and in addition to other activities, IE
26、C publishes International Standards, Technical Specifications,Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IECPublication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interestedin the subject dealt with m
27、ay participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closelywith the International Organization for Standardization (ISO) in accordance with conditions determined byagreeme
28、nt between the two organizations.2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an internationalconsensus of opinion on the relevant subjects since each technical committee has representation from allinterested IEC National Committees.3) IEC Publica
29、tions have the form of recommendations for international use and are accepted by IEC NationalCommittees in that sense. While all reasonable efforts are made to ensure that the technical content of IECPublications is accurate, IEC cannot be held responsible for the way in which they are used or for a
30、nymisinterpretation by any end user.4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publicationstransparently to the maximum extent possible in their national and regional publications. Any divergencebetween any IEC Publication and the corresponding na
31、tional or regional publication shall be clearly indicated inthe latter.5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformityassessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for anyservices ca
32、rried out by independent certification bodies.6) All users should ensure that they have the latest edition of this publication.7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts andmembers of its technical committees and IEC National Comm
33、ittees for any personal injury, property damage orother damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) andexpenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IECPublications.8) Attention is drawn to th
34、e Normative references cited in this publication. Use of the referenced publications isindispensable for the correct application of this publication.9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject ofpatent rights. IEC shall not be held re
35、sponsible for identifying any or all such patent rights.International Standard IEC 61754-6-100 has been prepared by subcommittee SC86B: Fibre optic interconnecting devices and passive components, of IEC technical committee 86: Fibre optics. This first edition of IEC 61754-6-100 cancels and replaces
36、the first edition of IEC 61754-6-1 published in 2003. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) change of the standard number;b) change of the interface number;c) addition of an intermatea
37、bility table;BS EN 61754-6-100:2016 4 IEC 61754-6-100:2015 IEC 2015 d) change in the pin gauge specification; e) change in the specification of the ferrule outside diameter. f) addition of a table of the ferrule grade including multimode. The text of this standard is based on the following documents
38、: FDIS Report on voting 86B/3939/FDIS 86B/3960/RVD Full information on the voting for the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all parts in the IEC 6
39、1754 series, published under the general title Fibre optic interconnecting devices and passive components Fibre optic connector interfaces, can be found on the IEC website. Future standards in this series will carry the new general title as cited above. Titles of existing standards in this series wi
40、ll be updated at the time of the next edition. The committee has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC website under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will
41、 be reconfirmed, withdrawn, replaced by a revised edition, or amended. BS EN 61754-6-100:2016IEC 61754-6-100:2015 IEC 2015 5 FIBRE OPTIC INTERCONNECTING DEVICES AND PASSIVE COMPONENTS FIBRE OPTIC CONNECTOR INTERFACES Part 6-100: Type MU connector family Simplified receptacle MU-PC connector interfac
42、es 1 Scope This part of IEC 61754 defines the standard interface dimensions of simplified receptacle dimensions for the type MU connector family. The receptacle assembly consists of a simplified receptacle housing and a simplified plug. 2 Normative references The following documents, in whole or in
43、part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 61300-3-22, Fibre optic interconnecting dev
44、ices and passive components Basic test and measurement procedures Part 3-22: Examinations and measurements Ferrule compression force IEC 61754-6:2013, Fibre optic interconnecting devices and passive components Fibre optic connector interfaces Part 6:Type MU connector family IEC 61755-3-1, Fibre opti
45、c connector optical interfaces Part 3-1:Optical interface, 2,5 mm and 1,25 mm diameter cylindrical full zirconia PC ferrule, single mode fibre 3 Description The parent connector for the type MU connector family is a miniature single-position plug which is characterized by one or more cylindrical, sp
46、ring-loaded butting ferrules of a 1,25 mm typical diameter, and a push-pull coupling mechanism. a) The simplified receptacles whose standard interface dimensions are defined in this part ofIEC 61754, are made up of simplified receptacle housings and simplified plugs.b) The simplified receptacle hous
47、ings are used to retain the connector plug and mechanicallymaintain the optical datum target of the plugs at a defined position within the simplifiedreceptacle housings.c) A spring is not included in the simplified plug.d) The simplified plug is removed with the aid of a tool.e) The optical alignmen
48、t mechanism of the connector is of a resilient sleeve style.f) The simplified receptacle housings are to be mated with the plug specified inIEC 61754-6:2013, Figure 1 which is the counterpart of the simplified plug.BS EN 61754-6-100:2016 6 IEC 61754-6-100:2015 IEC 2015 4 Interfaces 4.1 General This
49、standard contains the following standard interfaces. Interface IEC 61754-6-100-1: simplified receptacles housings interface Interface IEC 61754-6-100-2: simplified plugs interface The simplified plug has a ferrule with a spherical polished ferrule endface, and realizes physical contact (PC). 4.2 Intermateability Table 1 shows the intermateability of the interface. The mating plugs shall employ the ferrule with the same polished endface shape. An example of an
