1、BSI Standards PublicationAdjustable speed electrical power drive systemsPart 7-303: Generic interface and use of profiles for power drive systems Mapping of profile type 3 to network technologiesBS EN 61800-7-303:2016National forewordThis British Standard is the UK implementation of EN 61800-7-303:2
2、016. Itis identical to IEC 61800-7-303:2015. It supersedes BS EN 61800-7-303:2008,which will be withdrawn on 12 October 2018.The UK participation in its preparation was entrusted to TechnicalCommittee PEL/22, Power electronics.A list of organizations represented on this committee can be obtained onr
3、equest to its secretary.This publication does not purport to include all the necessary provisions ofa contract. Users are responsible for its correct application. The British Standards Institution 2016.Published by BSI Standards Limited 2016ISBN 978 0 580 82134 9ICS 29.200; 35.100.05Compliance with
4、a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 29 February 2016.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 61800-7-303:2016EUROPEAN ST
5、ANDARD NORME EUROPENNE EUROPISCHE NORM EN 61800-7-303 February 2016 ICS 29.200; 35.100.05 Supersedes EN 61800-7-303:2008 English Version Adjustable speed electrical power drive systems - Part 7-303: Generic interface and use of profiles for power drive systems - Mapping of profile type 3 to network
6、technologies(IEC 61800-7-303:2015) Entranements lectriques de puissance vitesse variable - Partie 7-303: Interface gnrique et utilisation de profils pour les entranements lectriques de puissance - Mise en correspondance du profil de type 3 avec les technologies de rseaux (IEC 61800-7-303:2015) Elekt
7、rische Leistungsantriebssysteme mit einstellbarer Drehzahl - Teil 7-303: Generisches Interface und Nutzung von Profilen fr Leistungsantriebssysteme (PDS) - Abbildung von Profil-Typ 3 auf Netzwerktechnologien (IEC 61800-7-303:2015) This European Standard was approved by CENELEC on 2015-12-25. CENELEC
8、 members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on appl
9、ication to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CE
10、NELEC Management Centre has the same status as the official versions.CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Ic
11、eland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Euro
12、pisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 61800-7-303:2016 E BS EN 61800-7-303:2016EN 61800-7-303:2016 2 Europe
13、an foreword The text of document 22G/313/FDIS, future edition 2 of IEC 61800-7-303, prepared by SC 22G “Adjustable speed electric drive systems incorporating semiconductor power converters” of IEC/TC 22 “Power electronic systems and equipment“ was submitted to the IEC-CENELEC parallel vote and appro
14、ved by CENELEC as EN 61800-7-303:2016. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2016-09-25 latest date by which the national standards conflicting with the documen
15、t have to be withdrawn (dow) 2018-12-25 This document supersedes EN 61800-7-303:2008. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights.
16、Endorsement notice The text of the International Standard IEC 61800-7-303:2015 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 61158-2:2014 NOTE Harmonized as EN
17、61158-2:2014 (not modified). IEC 61158-3-3:2014 NOTE Harmonized as EN 61158-3-3:2014 (not modified). IEC 61158-4-3:2014 NOTE Harmonized as EN 61158-4-3:2014 (not modified). IEC 61499-1:2005 NOTE Harmonized as EN 61499-1:2005 1)(not modified). IEC 61800 Series NOTE Harmonized as EN 61800 Series. IEC
18、61800-7:2015 Series NOTE Harmonized as EN 61800-7:2016 Series. IEC 61800-7-1:2015 NOTE Harmonized as EN 61800-7-1:2016 (not modified). IEC 61800-7-201:2015 NOTE Harmonized as EN 61800-7-201:2016 (not modified). IEC 61800-7-202:2015 NOTE Harmonized as EN 61800-7-202:2016 (not modified). IEC 61800-7-2
19、04:2015 NOTE Harmonized as EN 61800-7-204:2016 (not modified). IEC 61800-7-301:2015 NOTE Harmonized as EN 61800-7-301:2016 (not modified). IEC 61800-7-302:2015 NOTE Harmonized as EN 61800-7-302:2016 (not modified). IEC 61800-7-304:2015 NOTE Harmonized as EN 61800-7-304:2016 (not modified). 1)Superse
20、ded by EN 61499-1:2013 (IEC 61499-1:2012). BS EN 61800-7-303:2016EN 61800-7-303:2016 3 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and
21、are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod
22、), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu Publication Year Title EN/HD Year IEC 61158-5-3 - Industrial communication networks - Fieldbus specifications - Part 5-3: Application l
23、ayer service definition - Type 3 elements EN 61158-5-3 - IEC 61158-5-10 - Industrial communication networks - Fieldbus specifications - Part 5-10: Application layer service definition - Type 10 elements EN 61158-5-10 - IEC 61158-6-3 - Industrial communication networks - Fieldbus specifications - Par
24、t 6-3: Application layer protocol specification - Type 3 elements EN 61158-6-3 - IEC 61158-6-10 - Industrial communication networks - Fieldbus specifications - Part 6-10: Application layer protocol specification - Type 10 elements EN 61158-6-10 - IEC 61784-1 - Industrial communication networks - Pro
25、files - Part 1: Fieldbus profiles EN 61784-1 - IEC 61784-2 - Industrial communication networks - Profiles - Part 2: Additional fieldbus profiles for real-time networks based on ISO/IEC 8802-3 EN 61784-2 - IEC 61800-7-203 2015 Adjustable speed electrical power drive systems - Part 7-203: Generic inte
26、rface and use of profiles for power drive systems - Profile type 3 specification EN 61800-7-203 2016 BS EN 61800-7-303:2016 2 IEC 61800-7-303:2015 IEC 2015 CONTENTS FOREWORD . 7 INTRODUCTION . 9 0.1 General . 9 0.2 Patent declaration . 12 1 Scope 14 2 Normative references 14 3 Terms, definitions and
27、 abbreviated terms 14 3.1 Terms and definitions 14 3.2 Abbreviated terms . 19 4 Mapping to PROFIBUS DP 21 4.1 General . 21 4.2 Mapping to PROFIBUS data types 21 4.3 Base Model at PROFIBUS DP . 22 4.3.1 Communication devices . 22 4.3.2 Communication relationship . 23 4.3.3 Communication network . 24
28、4.3.4 Communication services 25 4.3.5 P-Device communication model . 27 4.3.6 Base Model State Machine 28 4.3.7 Definition of the CO . 29 4.4 Drive Model at PROFIBUS DP 29 4.4.1 P-Device 29 4.4.2 Drive Unit 30 4.5 DO IO Data . 30 4.5.1 COs for DO IO Data configuration 30 4.5.2 Standard telegram conf
29、iguration 32 4.5.3 Cyclic Data Exchange between DP-Slaves (DXB) 34 4.6 Parameter Access . 43 4.6.1 PAP for Parameter Access 43 4.6.2 Definition of the Base Mode Parameter Access mechanism . 45 4.7 P-Device configuration 53 4.7.1 P-Device configuration on PROFIBUS DP 53 4.7.2 Drive Unit configuration
30、 on PROFIBUS DP 53 4.7.3 Getting the Drive Object ID (DO-ID) 55 4.8 Diagnosis 57 4.9 Clock Synchronous Operation . 57 4.9.1 Sequence of an isochronous DP cycle . 57 4.9.2 Time settings . 58 4.9.3 Running-up, cyclic operation 63 4.9.4 Parameterisation, configuring (Set_Prm, GSD) 73 4.9.5 Clock cycle
31、generation (Global Control) and clock cycle save 75 4.9.6 Monitoring mechanisms . 79 4.10 PROFIBUS DP specific parameter 81 4.10.1 Overview of the communication interface related parameters. 81 4.10.2 Definition of the specific parameters 81 4.11 Specified communication functions for the Application
32、 Classes . 82 BS EN 61800-7-303:2016IEC 61800-7-303:2015 IEC 2015 3 5 Mapping to PROFINET IO 83 5.1 General . 83 5.2 Mapping to PROFINET IO data types 83 5.3 Base Model at PROFINET IO 84 5.3.1 Communication devices . 84 5.3.2 Communication relationship . 85 5.3.3 Communication network . 86 5.3.4 Com
33、munication services 87 5.3.5 P-Device communication model . 88 5.3.6 Base Model State Machine 90 5.3.7 Definition of the CO . 91 5.4 Drive Model at PROFINET IO 91 5.4.1 P-Device 91 5.4.2 Drive Unit 92 5.4.3 DO architecture . 92 5.4.4 Definition of the Module Ident Number and API 94 5.4.5 Definition
34、of the Submodule Ident Number . 94 5.5 DO IO Data . 96 5.5.1 COs for DO IO Data configuration 96 5.5.2 IO Data Producer and Consumer Status 96 5.6 Parameter Access . 96 5.6.1 PAPs for Parameter Access . 96 5.6.2 Base Mode Parameter Access . 97 5.7 P-Device Configuration . 99 5.7.1 P-Device Configura
35、tion on PROFINET IO 99 5.7.2 Drive Unit Configuration on PROFINET IO . 100 5.7.3 Getting the Drive Object ID (DO-ID) 100 5.8 Diagnosis 101 5.8.1 Use of PROFINET IO Diagnosis for PROFIdrive 101 5.8.2 Use of the Alarm ASE 101 5.8.3 Use of the ChannelDiagnosisData structure . 102 5.8.4 Use of the Chann
36、elErrorType 104 5.8.5 On demand access of Diagnosis Information . 104 5.9 Clock Synchronous Operation . 105 5.10 PROFINET IO specific parameter 106 5.10.1 Overview about the communication interface related parameters . 106 5.10.2 Definition of the specific parameters 106 5.11 Specified communication
37、 functions for the Application Classes . 108 5.12 I any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates cl
38、osely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the rele
39、vant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the
40、technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum
41、 extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies pro
42、vide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or
43、 its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expens
44、es arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. Internati
45、onal Standard IEC 61800-7-303 has been prepared by subcommittee SC 22G: Adjustable speed electric drive systems incorporating semiconductor power converters, of IEC technical committee TC 22: Power electronic systems and equipment. This second edition cancels and replaces the first edition published
46、 in 2007. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) Enhanced definition of the using of PROFINET IO Diagnosis ASE and Alarm ASE; b) Minor updates in the mapping of the Base Mode Parameter
47、Access to PROFIBUS and PROFINET. BS EN 61800-7-303:2016 8 IEC 61800-7-303:2015 IEC 2015 The text of this standard is based on the following documents: FDIS Report on voting 22G/313/FDIS 22G/328/RVD Full information on the voting for the approval of this standard can be found in the report on voting
48、indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. A list of all parts of the IEC 61800 series, under the general title Adjustable speed electrical power drive systems, can be found on the IEC website. The committee has decided that the
49、 contents of this publication will remain unchanged until the stability date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. IMPORTANT The colour inside logo on the cover page of this publication indicates that it contains colours which are considered to be useful for the correct understanding of its contents. Users should therefore print this d
