1、Electromechanical elementary relaysPart 2-1: Reliability - Procedure for the verification of B10 values (IEC 61810-2-1:2017)BS EN 61810-2-1:2017BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 61810-2-1 October 2017
2、 ICS 29.120.70 Supersedes EN 61810-2-1:2011 English Version Electromechanical elementary relays - Part 2-1: Reliability - Procedure for the verification of B10values (IEC 61810-2-1:2017) Relais lectromcaniques lmentaires - Partie 2-1: Fiabilit - Procdure de vrification des valeurs de B10(IEC 61810-2
3、-1:2017) Elektromechanische Elementarrelais - Teil 2-1: Funktionsfhigkeit (Zuverlssigkeit) - Verfahren zum Nachweis der B10-Werte (IEC 61810-2-1:2017) This European Standard was approved by CENELEC on 2017-07-04. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which sti
4、pulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This Euro
5、pean Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC me
6、mbers are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, N
7、orway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Cen
8、tre: Avenue Marnix 17, B-1000 Brussels 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 61810-2-1:2017 E National forewordThis British Standard is the UK implementation of EN 61810-2-1:2017. It is identical to IEC 61810-2-1:2017
9、. It supersedes BS EN 61810-2-1:2011, which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee EPL/94, General purpose relays and reed contact units.A list of organizations represented on this committee can be obtained on request to its secretary.This publicati
10、on does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2017 Published by BSI Standards Limited 2017ISBN 978 0 580 90196 6ICS 29.120.70Compliance with a British Standard cannot confer immunity fro
11、m legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 October 2017.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 6181021:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 61810-2
12、-1 October 2017 ICS 29.120.70 Supersedes EN 61810-2-1:2011 English Version Electromechanical elementary relays - Part 2-1: Reliability - Procedure for the verification of B10values (IEC 61810-2-1:2017) Relais lectromcaniques lmentaires - Partie 2-1: Fiabilit - Procdure de vrification des valeurs de
13、B10(IEC 61810-2-1:2017) Elektromechanische Elementarrelais - Teil 2-1: Funktionsfhigkeit (Zuverlssigkeit) - Verfahren zum Nachweis der B10-Werte (IEC 61810-2-1:2017) This European Standard was approved by CENELEC on 2017-07-04. CENELEC members are bound to comply with the CEN/CENELEC Internal Regula
14、tions which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC me
15、mber. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versi
16、ons. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the
17、 Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC
18、 Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 61810-2-1:2017 E BS EN 6181021:2017EN 61810-2-1:2017 2 European foreword The text of document 94/416/FDIS, future edition 2 o
19、f IEC 61810-2-1, prepared by IEC/TC 94 “All-ornothing electrical relays“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61810-2-1:2017. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identica
20、l national standard or by endorsement (dop) 2018-04-06 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2020-10-06 This document supersedes EN 61810-2-1:2011. Attention is drawn to the possibility that some of the elements of this document may be t
21、he subject of patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 61810-2-1:2017 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliog
22、raphy, the following notes have to be added for the standards indicated: ISO 13849-2:2012 NOTE Harmonized as EN ISO 13849-2:2012 (not modified). BS EN 6181021:2017EN 61810-2-1:2017 2 European foreword The text of document 94/416/FDIS, future edition 2 of IEC 61810-2-1, prepared by IEC/TC 94 “All-orn
23、othing electrical relays“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 61810-2-1:2017. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 201
24、8-04-06 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2020-10-06 This document supersedes EN 61810-2-1:2011. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC shall not
25、be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 61810-2-1:2017 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for
26、 the standards indicated: ISO 13849-2:2012 NOTE Harmonized as EN ISO 13849-2:2012 (not modified). EN 61810-2-1:2017 3 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents are referred to in the text in such a w
27、ay that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 Where an International Publication has been modified
28、by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 61810-1 2015 Electromechanical elementary relays - Par
29、t 1: General and safety requirements EN 61810-1 2015 IEC 61810-2 2017 Electromechanical elementary relays - Part 2: Reliability EN 61810-2 2017 IEC 61810-3 - Electromechanical elementary relays - Part 3: Relays with forcibly guided (mechanically linked) contacts EN 61810-3 - IEC 62061 - Safety of ma
30、chinery - Functional safety of safety-related electrical, electronic and programmable electronic control systems EN 62061 - ISO 13849-1 2015 Safety of machinery - Safety-related parts of control systems - Part 1: General principles for design EN ISO 13849-1 2015 BS EN 6181021:2017This page deliberat
31、ely left blank 2 IEC 61810-2-1:2017 IEC 2017 CONTENTS FOREWORD . 3 INTRODUCTION . 5 1 Scope 6 2 Normative references 6 3 Terms and definitions 6 3.2 Definitions related to tests 7 4 Verification of B10. 7 4.1 General . 7 4.2 Requirements . 7 4.2.1 Test specimens . 7 4.2.2 Test circuit . 8 4.2.3 Cont
32、act loads 8 4.2.4 Environmental conditions . 8 4.2.5 Operating conditions 8 4.2.6 Failure criteria . 8 4.3 Performance of the tests . 9 4.3.1 Type test . 9 4.3.2 Routine test . 9 5 Evaluation and verification of B10D. 9 5.1 General . 9 5.2 Requirements . 10 5.2.1 Test specimens . 10 5.2.2 Test circu
33、it . 10 5.2.3 Contact loads 11 5.2.4 Environmental conditions . 11 5.2.5 Operating conditions 11 5.2.6 Failure criteria . 11 5.3 Performance of the tests . 12 5.3.1 Type test . 12 5.3.2 Routine test . 12 Annex A (informative) Example illustrating the assessment of malfunctions for B10Devaluation . 1
34、5 A.1 Purpose 15 A.2 Basic assumptions 15 A.3 Example 15 A.4 Evaluation . 16 Bibliography 17 Figure 1 Schematic flowchart . 13 Figure 2 Schematic flowchart for relays where dangerous failures have to be assessed 14 Table A.1 Example with number of cycles at which malfunctions have been recorded 15 2
35、 IEC 61810-2-1:2017 IEC 2017 CONTENTS FOREWORD . 3 INTRODUCTION . 5 1 Scope 6 2 Normative references 6 3 Terms and definitions 6 3.2 Definitions related to tests 7 4 Verification of B10. 7 4.1 General . 7 4.2 Requirements . 7 4.2.1 Test specimens . 7 4.2.2 Test circuit . 8 4.2.3 Contact loads 8 4.2.
36、4 Environmental conditions . 8 4.2.5 Operating conditions 8 4.2.6 Failure criteria . 8 4.3 Performance of the tests . 9 4.3.1 Type test . 9 4.3.2 Routine test . 9 5 Evaluation and verification of B10D. 9 5.1 General . 9 5.2 Requirements . 10 5.2.1 Test specimens . 10 5.2.2 Test circuit . 10 5.2.3 Co
37、ntact loads 11 5.2.4 Environmental conditions . 11 5.2.5 Operating conditions 11 5.2.6 Failure criteria . 11 5.3 Performance of the tests . 12 5.3.1 Type test . 12 5.3.2 Routine test . 12 Annex A (informative) Example illustrating the assessment of malfunctions for B10Devaluation . 15 A.1 Purpose 15
38、 A.2 Basic assumptions 15 A.3 Example 15 A.4 Evaluation . 16 Bibliography 17 Figure 1 Schematic flowchart . 13 Figure 2 Schematic flowchart for relays where dangerous failures have to be assessed 14 Table A.1 Example with number of cycles at which malfunctions have been recorded 15 BS EN 6181021:201
39、7IEC 61810-2-1:2017 IEC 2017 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ ELECTROMECHANICAL ELEMENTARY RELAYS Part 2-1: Reliability Procedure for the verification of B10values FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising
40、all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards,
41、Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory
42、 work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations
43、. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recom
44、mendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by an
45、y end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional pub
46、lication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by indep
47、endent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any
48、personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative
49、 references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 61810-2-1 has been prepared by IEC technical committee 94: All-or-nothing electrical relays. This second editio
