1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationCommunication networks and systems for power utility automationPart 7-4: Basic communication structure Compatible logical node classes and data object classesBS EN 61850-7-4:2010
2、National forewordThis British Standard is the UK implementation of EN 61850-7-4:2010. It isidentical to IEC 61850-7-4:2010. It supersedes BS EN 61850-7-4:2003 whichis withdrawn.The UK participation in its preparation was entrusted to Technical CommitteePEL/57, Power systems management and associated
3、 information exchange.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions of acontract. Users are responsible for its correct application. BSI 2010ISBN 978 0 580 52973 3ICS 33.200Co
4、mpliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of the StandardsPolicy and Strategy Committee on 31 July 2010.Amendments issued since publicationAmd. No. Date Text affectedBRITISH STANDARDBS EN 61850-7-4:2010,EUROP
5、EAN STANDARD EN 61850-7-4 NORME EUROPENNE EUROPISCHE NORM June 2010 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Management Centre: Avenue Marnix 17, B - 1000 Brussels 2010 CENELEC - A
6、ll rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 61850-7-4:2010 E ICS 33.200 Supersedes EN 61850-7-4:2003English version Communication networks and systems for power utility automation - Part 7-4: Basic communication structure - Compatible lo
7、gical node classes and data object classes (IEC 61850-7-4:2010) Rseaux et systmes de communication pour lautomatisation des systmes lectriques - Partie 7-4 : Structure de communication de base - Classes de nud logique et classes de donne objet compatibles (CEI 61850-7-4:2010) Kommunikationsnetze und
8、 -systeme fr die Automatisierung in der elektrischen Energieversorgung - Teil 7-4: Grundlegende Kommunikationsstruktur - Kompatible Logikknoten- und Datenklassen (IEC 61850-7-4:2010) This European Standard was approved by CENELEC on 2010-06-01. CENELEC members are bound to comply with the CEN/CENELE
9、C Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CEN
10、ELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions
11、. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Ro
12、mania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 61850-7-4:2010EN 61850-7-4:2010 - 2 - Foreword The text of document 57/1045/FDIS, future edition 2 of IEC 61850-7-4, prepared by IEC TC 57, Power systems management and associated information exchange, was submitted
13、to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 61850-7-4 on 2010-06-01. This European Standard supersedes EN 61850-7-4:2003. Future standards in this series will carry the new general title as cited above. Titles of existing standards in this series will be updated at the time of
14、 the next edition. The major technical changes with regard to EN 61850-7-4:2003 are as follows: corrections and clarifications according to information letter “IEC 61850-technical issues by the IEC TC 57” (see document 57/963/INF, 2008-07-18); extensions for new logical nodes for the power quality d
15、omain; extensions for the model for statistical and historical statistical data; extensions regarding IEC 61850-90-1 (substation-substation communication); extensions for new logical nodes for monitoring functions according to EN 62271; new logical nodes from EN 61850-7-410 and EN 61850-7-420 of gen
16、eral interest. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent rights. The following dates were fixed: latest date by which the EN has to be impl
17、emented at national level by publication of an identical national standard or by endorsement (dop) 2011-03-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2013-06-01 Annex ZA has been added by CENELEC. _ Endorsement notice The text of the Internation
18、al Standard IEC 61850-7-4:2010 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 60870-5-101 NOTE Harmonized as EN 60870-5-101. IEC 60870-5-103 NOTE Harmonized as E
19、N 60870-5-103. IEC 61000-4-30 NOTE Harmonized as EN 61000-4-30. IEC 61850-6 NOTE Harmonized as EN 61850-6. IEC 61850-7-410:2007 NOTE Harmonized as EN 61850-7-410:2007 (not modified). IEC 61850-7-420 NOTE Harmonized as EN 61850-7-420. IEC 61850-8 series NOTE Harmonized in EN 61850-8 series (not modif
20、ied). BS EN 61850-7-4:2010- 3 - EN 61850-7-4:2010 IEC 61850-9 series NOTE Harmonized in EN 61850-9 series (not modified). IEC 61850-10 NOTE Harmonized as EN 61850-10. _ BS EN 61850-7-4:2010EN 61850-7-4:2010 - 4 - Annex ZA (normative) Normative references to international publications with their corr
21、esponding European publications The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE When an inte
22、rnational publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 60270 2000 High-voltage test techniques - Partial discharge measurements EN 60270 2001 IEC 61000-4-7 2002 Electromagnetic compatibility (EMC) - Part
23、4-7: Testing and measurement techniques - General guide on harmonics and interharmonics measurements and instrumentation, for power supply systems and equipment connected thereto EN 61000-4-7 2002 IEC 61000-4-15 - Electromagnetic compatibility (EMC) - Part 4-15: Testing and measurement techniques -
24、Flickermeter - Functional and design specifications EN 61000-4-15 - IEC/TS 61850-2 - Communication networks and systems in substations - Part 2: Glossary - - IEC 61850-5 - Communication networks and systems in substations - Part 5: Communication requirements for functions and device models EN 61850-
25、5 - IEC 61850-7-1 200X1)Communication networks and systems for power utility automation - Part 7-1: Basic communication structure - Principles and models EN 61850-7-1 200X2)IEC 61850-7-2 200X1)Communication networks and systems for power utility automation - Part 7-2: Basic information and communica
26、tion structure - Abstract communication service interface (ACSI) EN 61850-7-2 200X2)IEC 61850-7-3 200X1)Communication networks and systems for power utility automation - Part 7-3: Basic communication structure - Common data classes EN 61850-7-3 200X2)1)To be published. 2)At draft stage. BS EN 61850-
27、7-4:2010- 5 - EN 61850-7-4:2010 Publication Year Title EN/HD Year IEC 61850-9-2 - Communication networks and systems for power utility automation - Part 9-2: Specific Communication Service Mapping (SCSM) - Sampled values over ISO/IEC 8802-3 EN 61850-9-2 - IEEE C37.111 1999 IEEE Standard for Common F
28、ormat for Transient Data Exchange (COMTRADE) for Power Systems - - IEEE 519 1992 IEEE Recommended Practises and Requirements for Harmonic Control in Electrical Power Systems - - IEEE C37.2 1996 Electrical Power System Device Function Numbers and Contact Designations - - IEEE 1459 2000 IEEE Trial Use
29、 Standard Definitions for the Measurement of Electric Power Quantities Under Sinusoidal, Nonsinusoidal, Balanced or Unbalanced Conditions - - IEEE 1588 - IEEE Standard for a Precision Clock Synchronization Protocol for Networked Measurement and Control Systems - - BS EN 61850-7-4:2010 2 61850-7-4 IE
30、C:2010(E) CONTENTS INTRODUCTION.10 1 Scope.11 2 Normative references12 3 Terms and definitions .13 4 Abbreviated terms.13 5 Logical node classes.19 5.1 Logical node groups 19 5.2 Interpretation of logical node tables .20 5.3 System logical nodes LN group: L 21 5.3.1 LN relationships.21 5.3.2 LN: Phy
31、sical device information Name: LPHD.22 5.3.3 LN: common logical node Name: Common LN22 5.3.4 LN: Logical node zero Name: LLN0 24 5.3.5 LN: Physical communication channel supervision Name: LCCH24 5.3.6 LN: GOOSE subscription Name: LGOS .25 5.3.7 LN: Sampled value subscription Name: LSVS25 5.3.8 LN: T
32、ime management Name: LTIM.26 5.3.9 LN: Time master supervision Name: LTMS.26 5.3.10 LN: Service tracking Name: LTRK27 5.4 Logical nodes for automatic control LN Group: A27 5.4.1 Modelling remarks .27 5.4.2 LN: Neutral current regulator Name: ANCR 27 5.4.3 LN: Reactive power control Name: ARCO.29 5.4
33、.4 LN: Resistor control Name: ARIS .29 5.4.5 LN: Automatic tap changer controller Name: ATCC 30 5.4.6 LN: Voltage control Name: AVCO.31 5.5 Logical nodes for control LN Group: C .32 5.5.1 Modelling remarks .32 5.5.2 LN: Alarm handling Name: CALH .32 5.5.3 LN: Cooling group control Name: CCGR.32 5.5.
34、4 LN: Interlocking Name: CILO33 5.5.5 LN: Point-on-wave switching Name: CPOW33 5.5.6 LN: Switch controller Name: CSWI.34 5.5.7 LN: Synchronizer controller Name: CSYN.35 5.6 Logical nodes for functional blocks LN group F 36 5.6.1 Modelling remarks .36 5.6.2 LN: Counter Name: FCNT 36 5.6.3 LN: Curve s
35、hape description Name: FCSD .37 5.6.4 LN: Generic filter Name: FFIL 37 5.6.5 LN: Control function output limitation Name: FLIM 38 5.6.6 LN: PID regulator Name: FPID .38 5.6.7 LN: Ramp function Name: FRMP39 5.6.8 LN: Set-point control function Name: FSPT 39 5.6.9 LN: Action at over threshold Name: FX
36、OT40 5.6.10 LN: Action at under threshold Name: FXUT 40 BS EN 61850-7-4:201061850-7-4 IEC:2010(E) 3 5.7 Logical nodes for generic references LN Group: G .41 5.7.1 Modelling remarks .41 5.7.2 LN: Generic automatic process control Name: GAPC .41 5.7.3 LN: Generic process I/O Name: GGIO42 5.7.4 LN: Gen
37、eric log Name: GLOG42 5.7.5 LN: Generic security application Name: GSAL43 5.8 Logical nodes for interfacing and archiving LN Group: I43 5.8.1 Modelling remarks .43 5.8.2 LN: Archiving Name: IARC .43 5.8.3 LN: Human machine interface Name: IHMI.44 5.8.4 LN: Safety alarm function Name: ISAF .44 5.8.5
38、LN: Telecontrol interface Name: ITCI .45 5.8.6 LN: Telemonitoring interface Name: ITMI .45 5.8.7 LN: Teleprotection communication interfaces Name: ITPC .45 5.9 Logical nodes for mechanical and non-electric primary equipment LN group K .46 5.9.1 Modelling remarks .46 5.9.2 LN: Fan Name: KFAN 47 5.9.3
39、 LN: Filter Name: KFIL 47 5.9.4 LN: Pump Name: KPMP.48 5.9.5 LN: Tank Name: KTNK.48 5.9.6 LN: Valve control Name: KVLV.49 5.10 Logical nodes for metering and measurement LN Group: M50 5.10.1 Modelling remarks .50 5.10.2 LN: Environmental information Name: MENV .50 5.10.3 LN: Flicker measurement name
40、 Name: MFLK 51 5.10.4 LN: Harmonics or interharmonics Name: MHAI 52 5.10.5 LN: Non-phase-related harmonics or interharmonics Name: MHAN 53 5.10.6 LN: Hydrological information Name: MHYD 55 5.10.7 LN: DC measurement Name: MMDC55 5.10.8 LN: Meteorological information Name: MMET.55 5.10.9 LN: Metering
41、Name: MMTN56 5.10.10 LN: Metering Name: MMTR57 5.10.11 LN: Non-phase-related measurement Name: MMXN 57 5.10.12 LN: Measurement Name: MMXU57 5.10.13 LN: Sequence and imbalance Name: MSQI59 5.10.14 LN: Metering statistics Name: MSTA60 5.11 Logical nodes for protection functions LN Group: P 60 5.11.1 M
42、odelling remarks .60 5.11.2 LN: Differential Name: PDIF.61 5.11.3 LN: Direction comparison Name: PDIR 62 5.11.4 LN: Distance Name: PDIS63 5.11.5 LN: Directional overpower Name: PDOP 63 5.11.6 LN: Directional underpower Name: PDUP 64 5.11.7 LN: Rate of change of frequency Name: PFRC.64 5.11.8 LN: Har
43、monic restraint Name: PHAR .65 5.11.9 LN: Ground detector Name: PHIZ 65 5.11.10 LN: Instantaneous overcurrent Name: PIOC.66 5.11.11 LN: Motor restart inhibition Name: PMRI 66 5.11.12 LN: Motor starting time supervision Name: PMSS 67 BS EN 61850-7-4:2010 4 61850-7-4 IEC:2010(E) 5.11.13 LN: Over power
44、 factor Name: POPF 67 5.11.14 LN: Phase angle measuring Name: PPAM .67 5.11.15 LN: Rotor protection Name: PRTR .68 5.11.16 LN: Protection scheme Name: PSCH .68 5.11.17 LN: Sensitive directional earthfault Name: PSDE69 5.11.18 LN: Transient earth fault Name: PTEF .70 5.11.19 LN: Thyristor protection
45、Name: PTHF 70 5.11.20 LN: Time overcurrent Name: PTOC .70 5.11.21 LN: Overfrequency Name: PTOF .71 5.11.22 LN: Overvoltage Name: PTOV .72 5.11.23 LN: Protection trip conditioning Name: PTRC .72 5.11.24 LN: Thermal overload Name: PTTR .73 5.11.25 LN: Undercurrent Name: PTUC73 5.11.26 LN: Underfrequen
46、cy Name: PTUF74 5.11.27 LN: Undervoltage Name: PTUV74 5.11.28 LN: Underpower factor Name: PUPF75 5.11.29 LN: Voltage controlled time overcurrent Name: PVOC75 5.11.30 LN: Volts per Hz Name: PVPH .76 5.11.31 LN: Zero speed or underspeed Name: PZSU77 5.12 Logical nodes for power quality events LN Group
47、: Q 77 5.12.1 Modelling remarks .77 5.12.2 LN: Frequency variation Name: QFVR77 5.12.3 LN: Current transient Name: QITR .78 5.12.4 LN: Current unbalance variation Name: QIUB.78 5.12.5 LN: Voltage transient Name: QVTR79 5.12.6 LN: Voltage unbalance variation Name: QVUB .79 5.12.7 LN: Voltage variatio
48、n Name: QVVR 80 5.13 Logical nodes for protection related functions LN Group: R 80 5.13.1 Modelling remarks .80 5.13.2 LN: Disturbance recorder channel analogue Name: RADR .81 5.13.3 LN: Disturbance recorder channel binary Name: RBDR 81 5.13.4 LN: Breaker failure Name: RBRF .82 5.13.5 LN: Directiona
49、l element Name: RDIR .82 5.13.6 LN: Disturbance recorder function Name: RDRE 83 5.13.7 LN: Disturbance record handling Name: RDRS 84 5.13.8 LN: Fault locator Name: RFLO.84 5.13.9 LN: Differential measurements Name: RMXU.84 5.13.10 LN: Power swing detection/blocking Name: RPSB85 5.13.11 LN: Autoreclosing Name: RREC.86 5.13.12 LN: Synchronism-check Name: RSYN86 5.14 Logical nodes for supe
