1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationConsumer audio/video equipment Digital interfacePart 1: GeneralBS EN 61883-1:2009National forewordThis British Standard is the UK implementation of EN 61883-1:2009. It is identic
2、al to IEC 61883-1:2008. It supersedes BS EN 61883-1:2003, which is withdrawn.The UK participation in its preparation was entrusted to Technical Committee EPL/100, Audio, video and multimedia systems and equipment.A list of organizations represented on this committee can be obtained on request to its
3、 secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. BSI 2011ISBN 978 0 580 76164 5 ICS 33.160.01; 35.200Compliance with a British Standard cannot confer immunity from legal obligations.This British Sta
4、ndard was published under the authority of the Standards Policy and Strategy Committee on 31 July 2011.Amendments issued since publicationAmd. No. Date Text affectedBRITISH STANDARDBS EN 61883-1:2009EUROPEAN STANDARD EN 61883-1 NORME EUROPENNE EUROPISCHE NORM August 2009 CENELEC European Committee f
5、or Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: Avenue Marnix 17, B - 1000 Brussels 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members.
6、 Ref. No. EN 61883-1:2009 E ICS 33.160.01; 35.200 Supersedes EN 61883-1:2003English version Consumer audio/video equipment - Digital interface - Part 1: General (IEC 61883-1:2008) Matriel audio/vido grand public - Interface numrique - Partie 1: Gnralits (CEI 61883-1:2008) Audio/Video-Gerte der Unter
7、haltungselektronik - Digitale Schnittstelle - Teil 1: Allgemeines (IEC 61883-1:2008) This European Standard was approved by CENELEC on 2009-07-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status
8、 of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A
9、 version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Cypr
10、us, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 61883-1:2009EN 61883-1:
11、2009 Foreword The text of document 100/1236/CDV, future edition 3 of IEC 61883-1, prepared by technical area 4, Digital system interfaces and protocols, of IEC TC 100, Audio, video and multimedia systems and equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN
12、61883-1 on 2009-07-01. This European Standard supersedes EN 61883-1:2003. The significant technical changes with respect to EN 61883-1:2003 are as follows: allocation of a new FMT code for the 1394 Trade Association specification 601 over 1394; clarification of the meaning of FMT code; harmonization
13、 of EN 61883-1 with IEEE 1394.1 for speeds over S400. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2010-04-01 latest date by which the national standards conflicting with t
14、he EN have to be withdrawn (dow) 2012-07-01 Annex ZA has been added by CENELEC. _ Endorsement notice The text of the International Standard IEC 61883-1:2008 was approved by CENELEC as a European Standard without any modification. _ BS EN 61883-1:2009EN 61883-1:2009 Annex ZA (normative) Normative ref
15、erences to international publications with their corresponding European publications The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document
16、(including any amendments) applies. NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEEE 212 2001 Standard for a Control and Status Registers (CSR) - Architecture for microcomputer bus
17、es - - IEEE 1394 1995 Standard for a High Performance Serial Bus - - IEEE 1394a 2000 Standard for a High Performance Serial Bus - Amendment 1 - - BS EN 61883-1:200961883-1 IEC:2008(E) CONTENTS 1 Scope and object. 7 2 Normative references 7 3 Abbreviations . 7 4 High-performance serial bus layers 8 4
18、.1 Cable physical layer 8 4.2 Link layer 8 4.3 Transaction layer. 8 5 Minimum node capabilities .8 5.1 Serial bus management. .8 5.2 Command and status registers 8 5.2.1 CSR core registers . .8 5.2.2 Serial bus node registers . .9 5.2.3 Configuration ROM requirements.9 6 Real time data transmission
19、protocol . 12 6.1 Common isochronous packet (CIP) format 12 6.1.1 Isochronous packet structure. 12 6.1.2 Packet header structure. .12 6.1.3 CIP header structure .13 6.2 Transmission of fixed length source packet . .13 6.2.1 Two-quadlet CIP header (form_0=0, form_1=0) . 14 6.2.2 Isochronous packet tr
20、ansmission .17 7 Isochronous data flow management17 7.1 General .17 7.2 Plugs and plug control registers . 18 7.3 Connections . 19 7.4 Plug states . 20 7.5 OUTPUT_MASTER_PLUG register definition .22 7.6 INPUT_MASTER_PLUG register definition . 23 7.7 OUTPUT_PLUG_CONTROL register definition . .23 7.8
21、INPUT_PLUG_CONTROL register definition.25 7.9 Plug control register modification rules 26 7.10 Bus reset.27 7.11 Plug control register access rules .27 8 Connection management procedures (CMP). 28 8.1 Introduction . .28 8.2 Managing point-to-point connections . 29 8.2.1 Procedure for establishing a
22、point-to-point connection 29 8.2.2 Procedure for overlaying a point-to-point connection . . 30 8.2.3 Procedure for breaking a point-to-point connection 31 8.3 Managing broadcast-out connections . .32 8.3.1 Procedure for establishing a broadcast-out connection . 32 8.3.2 Procedure for overlaying a br
23、oadcast-out connection. . 33 8.3.3 Procedure for breaking a broadcast-out connection . 33 8.4 Managing broadcast-in connections34 BS EN 61883-1:200961883-1 IEC:2008(E) 8.4.1 Procedure for establishing a broadcast-in connection . 34 8.4.2 Procedure for overlaying a broadcast-in connection. 35 8.4.3 P
24、rocedure for breaking a broadcast-in connection . 35 8.5 Managing connections after a bus reset 36 8.5.1 Procedure for restoring a point-to-point connection after a bus reset . 36 8.5.2 Procedure for restoring a broadcast-out connection after a bus reset 37 8.5.3 Procedure for restoring a broadcast-
25、in connection after a bus reset . . 38 9 Function control protocol (FCP) .38 9.1 Introduction . .38 9.2 Asynchronous packet structure. 39 9.3 FCP frame structure 40 9.3.1 Vendor unique command/transaction set . 41 9.3.2 Extended command/transaction set . .42 Figure 1 Configuration ROM 10 Figure 2 Is
26、ochronous packet 12 Figure 3 CIP header. .13 Figure 4 Model of transmission of source packets . 14 Figure 5 Two quadlets CIP header (Form_0, Form_1=0) . .14 Figure 6 Source packet header format .15 Figure 7 Plug and PR usage 19 Figure 8 Connections 20 Figure 9 Plug state diagram .21 Figure 10 oMPR f
27、ormat .22 Figure 11 iMPR format 23 Figure 12 oPCR format .24 Figure 13 iPCR format 26 Figure 14 PCR address map 27 Figure 15 Point-to-point and broadcast connection counter modifications . . 29 Figure 16 Establishing a point-to-point connection 30 Figure 17 Overlaying a point-to-point connection .31
28、 Figure 18 Breaking a point-to-point connection . .32 Figure 19 Establishing a broadcast-out connection . 33 Figure 20 Overlaying a broadcast-out connection. . 33 Figure 21 Breaking a broadcast-out connection . . 34 Figure 22 Establishing a broadcast-in connection . 35 Figure 23 Overlaying a broadca
29、st-in connection. . 35 Figure 24 Breaking a broadcast-in connection 36 Figure 25 Time chart of connection management and PCR activities .36 Figure 26 Restoring a point-to-point connection .37 Figure 27 Restoring a broadcast-out connection 38 Figure 28 Restoring a broadcast-in connection . .38 Figure
30、 29 Command register and response register . .39 Figure 30 Write request for data block packet of IEEE 1394.40 Figure 31 Write request for data quadlet packet of IEEE 1394 . .40 BS EN 61883-1:200961883-1 IEC:2008(E) Figure 32 FCP frame structure . .41 Figure 33 Vendor unique frame format .42 Table 1
31、 Unit_SW_Version code assignment 11 Table 2 Code allocation of FN. 15 Table 3 Time stamp field of source packet header . .16 Table 4 Placing of data block sequence . .16 Table 5 Code allocation of FMT 16 Table 6 Time stamp of SYT field .17 Table 7 oMPR/iMPR/oPCR speed encoding spd and extended speed
32、 encoding xspd22 Table 8 oPCR overhead ID encoding .25 Table 9 CTS: Command/transaction set encoding . 41 BS EN 61883-1:200961883-1 IEC:2008(E) 7 CONSUMER AUDIO/VIDEO EQUIPMENT DIGITAL INTERFACE Part 1: General 1 Scope and object This part of IEC 61883 specifies a digital interface for consumer elec
33、tronic audio/video equipment using IEEE 1394. It describes the general packet format, data flow management and connection management for audio-visual data, and also the general transmission rules for control commands. The object of this standard is to define a transmission protocol for audio-visual
34、data and control commands which provides for the interconnection of digital audio and video equipment, using IEEE 1394. 2 Normative references The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated
35、references, the latest edition of the referenced document (including any amendments) applies. IEEE 212:2001, Standard for a Control and Status Registers (CSR) Architecture for microcomputer buses IEEE 1394:1995, Standard for a High Performance Serial Bus IEEE 1394a:2000, Standard for a High Performa
36、nce Serial Bus Amendment 1 NOTE Throughout this document, the term “IEEE 1394” indicates a reference to the standard that is the result of the editorial combination of IEEE 1394:1995 and IEEE 1394a:2000. Devices conforming solely to IEEE 1394:1995 may conform to IEC 61883. Devices conforming to IEC
37、61883 should conform to IEEE 1394a:2000. 3 Abbreviations For the purpose of this document, the following abbreviations apply. AV/C Audio Video Control CHF CIP Header Field CIP Common Isochronous Packet CMP Connection Management Procedures CSR Command and Status Register CTS Command/Transaction Set C
38、RC Cyclic Redundancy Check Code DVCR Digital Video Cassette Recorder EOH End of CIP Header FCP Function Control Protocol iPCR Input Plug Control Register iMPR Input Master Plug Register MPEG Motion Picture Experts Group oPCR Output Plug Control Register BS EN 61883-1:2009 8 61883-1 IEC:2008(E) oMPR
39、Output Master Plug Register ROM Read Only Memory spd Speed Encoding xspd Extended Speed Encoding For clarity, field names are shown in italics in this standard. 4 High-performance serial bus layers 4.1 Cable physical layer All cable physical layer implementations conforming to this standard shall me
40、et the performance criteria specified by IEEE 1394. Either the cable and connector defined in IEEE 1394:1995, or the cables and connector defined in IEEE 1394a:2000, shall be used. When necessary for an AV device to generate a bus reset, it shall follow the requirements of IEEE 1394a:2000, 8.2.1. An
41、 AV device that initiates a bus reset should generate an arbitrated (short) bus reset, as specified by IEEE 1394a:2000, in preference to the long bus reset defined by IEEE 1394:1995. 4.2 Link layer All link layer implementations conforming to this standard shall meet the specifications of IEEE 1394.
42、 4.3 Transaction layer All transaction layer implementations conforming to this standard shall meet the specifications of IEEE 1394. 5 Minimum node capabilities A node shall conform to the following requirements. A node shall be cycle master capable. This is because every node has the possibility to
43、 be assigned as a root. A node shall be isochronous resource manager capable, as specified by IEEE 1394:1995, and shall implement the additional isochronous resource manager facilities and responsibilities specified by IEEE 1394a:2000 in 8.3.1.5, 8.3.2.3.8, 8.3.2.3.11, 8.4.2.3 and 8.4.2.6A. A node w
44、hich transmits or receives isochronous packets shall have plug control registers (see 7.2). 5.1 Serial bus management Bus manager capability is optional for AV devices, but, if implemented by devices conforming to this standard, shall conform to IEEE 1394. 5.2 Command and status registers 5.2.1 CSR
45、core registers This standard conforms to the CSR architecture. Details of its registers are specified by IEEE 1394. The STATE_CLEAR.cmstr bit shall be implemented as specified by IEEE 1394a:2000, 8.3.2.2.1. BS EN 61883-1:200961883-1 IEC:2008(E) 9 NOTE The cmstr bit is set automatically (see IEEE 139
46、4a:2000, 8.3.2.2.1) by system software or hardware when a node becomes the new root after the bus reset process is completed. In this manner, it is possible to ensure the fast resumption and continuity of data transmission where the time scale is critical at the level of microseconds. The rapid acti
47、vation of a new cycle master decreases the likelihood of a gap in the transmission of cycle start packets; uninterrupted transmission of cycle start packets at nominal 125 s intervals is critical to the delivery of isochronous data within its latency requirements. 5.2.2 Serial bus node registers Imp
48、lementation requirements for bus-dependent registers in this standard conform to IEEE 1394. A node shall have the following registers: CYCLE_TIME register BUS_TIME register BUS_MANAGER_ID register BANDWIDTH_AVAILABLE register CHANNELS_AVAILABLE register A node should have the following register spec
49、ified by IEEE 1394a:2000: BROADCAST_CHANNEL register 5.2.3 Configuration ROM requirements A node shall implement the general ROM format as defined in IEEE 1212:2001 and IEEE 1394. Additional information required for implementations of this standard shall be included in one of the unit directories. Figure 1 shows an example of the configuration ROM implementation for this standard. BS EN 61883-1:2009 10 6
