1、BSI Standards PublicationCommon control interface for networked digital audio and video productsPart 5-1: Transmission over networks GeneralBS EN 62379-5-1:2014National forewordThis British Standard is the UK implementation of EN 62379-5-1:2014. It isidentical to IEC 62379-5-1:2014.The UK participat
2、ion in its preparation was entrusted to Technical Com-mittee EPL/100, Audio, video and multimedia systems and equipment.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions ofa contr
3、act. Users are responsible for its correct application. The British Standards Institution 2014.Published by BSI Standards Limited 2014ISBN 978 0 580 79811 5ICS 35.100; 33.160Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the
4、authority of theStandards Policy and Strategy Committee on 31 October 2014.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 62379-5-1:2014EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 62379-5-1 October 2014 ICS 35.100; 33.160 English Version Common control
5、 interface for networked digital audio and video products - Part 5-1: Transmission over networks - General (IEC 62379-5-1:2014) Interface de commande commune pour produits audio et vido numriques connects en rseau - Partie 5-1: Transmission sur des rseaux - Gnralits (CEI 62379-5-1:2014) Gemeinsame S
6、teuerschnittstelle fr netzwerkbetriebene digitale Audio- und Videogerte - Teil 5-1: bertragung ber Netzwerke - Allgemeines (IEC 62379-5-1:2014) This European Standard was approved by CENELEC on 2014-08-13. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate
7、the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European St
8、andard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members a
9、re the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway,
10、Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Mar
11、nix 17, B-1000 Brussels 2014 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 62379-5-1:2014 E BS EN 62379-5-1:2014EN 62379-5-1:2014 - 2 - Foreword The text of document 100/2107/CDV, future edition 1 of IEC 62379-5-1, prepared by tec
12、hnical area 4 “Digital system interfaces and protocols“, of IEC/TC 100 “Audio, video and multimedia systems and equipment“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 62379-5-1:2014. The following dates are fixed: latest date by which the document has to be implement
13、ed at national level by publication of an identical national standard or by endorsement (dop) 2015-05-13 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2017-08-13 Attention is drawn to the possibility that some of the elements of this document ma
14、y be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 62379-5-1:2014 was approved by CENELEC as a European Standard without any modification. In the official ver
15、sion, for Bibliography, the following note has to be added for the standard indicated : IEC 62379 NOTE Harmonized in EN 62379 series. BS EN 62379-5-1:2014- 3 - EN 62379-5-1:2014 Annex ZA (normative) Normative references to international publications with their corresponding European publications The
16、 following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 Whe
17、n an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 62379
18、-1 2007 Common control interface for networked digital audio and video products - Part 1: General EN 62379-1 2007 IEC 62379-5-2 2014 Common control interface for networked digital audio and video products - Part 5-2: Transmission over networks - Signalling EN 62379-5-2 2014 BS EN 62379-5-1:2014 2 IE
19、C 62379-5-1:2014 IEC 2014 CONTENTS INTRODUCTION . 6 1 Scope 7 2 Normative references 7 3 Terms, definitions and abbreviations . 7 3.1 Terms and definitions 7 3.2 Abbreviations 7 4 Network service specifications . 8 4.1 Service for live media . 8 4.2 Service for management messages 8 5 MIB definition
20、s applicable to all networks 8 5.1 General . 8 5.2 Type definitions 8 5.3 Conceptual row type definitions 9 5.4 MIB object definitions 10 5.4.1 Network ports 10 5.4.2 List of media sources . 12 5.4.3 List of live media destinations 14 6 Calls 19 6.1 List of destinations in end equipment 19 6.2 Conne
21、cting a flow . 20 6.3 Terminating a flow 20 6.4 Maintaining calls . 21 7 Status broadcasts 21 7.1 General . 21 7.2 Coding and encapsulation of reports . 22 7.3 Standard report groups . 23 7.3.1 General . 23 7.3.2 List of sources . 23 7.3.3 List of destinations 23 Annex A (informative) Machine-readab
22、le block definitions 24 Annex B (informative) Machine-readable data formats . 36 Annex C (informative) Support for future networks . 39 C.1 General . 39 C.2 Services provided by the network 39 C.3 Network ports, flows, and media streams 40 C.3.1 Calls and flows 40 C.3.2 Connectivity model 40 C.3.3 P
23、rivilege 40 C.3.4 Call identity . 40 C.4 Control of routing 41 C.5 Scheduled calls 41 Bibliography 42 Table 1 Managed objects for network ports 10 BS EN 62379-5-1:2014IEC 62379-5-1:2014 IEC 2014 3 Table 2 Managed objects conveying the list of sources 12 Table 3 Managed objects conveying the list of
24、destinations . 15 BS EN 62379-5-1:2014 6 IEC 62379-5-1:2014 IEC 2014 INTRODUCTION Structure of the family of standards IEC 62379 specifies the common control Interface, a protocol for managing networked audiovisual equipment. The following parts exist or are planned: 1 General 2 Audio 3 Video 4 Data
25、 5 Transmission over networks 6 Packet transfer service 7 Measurement IEC 62379-1:2007, specifies aspects which are common to all equipment, and it includes an introduction to the common control interface. IEC 62379-2:2008, IEC 62379-3 (under consideration) and IEC 62379-4 (under consideration) spec
26、ify control of internal functions specific to equipment carrying particular types of live media. IEC 62379-4 refers to time-critical data such as commands to automation equipment, but not to packet data such as the control messages themselves. IEC 62379-5 specifies control of transmission of these m
27、edia over each individual network technology. It includes network specific management interfaces along with network specific control elements that integrate into the control framework. IEC 62379-5-1, (this standard) specifies management of aspects which are common to all network technologies. IEC 62
28、379-5-2 specifies protocols which can be used between networking equipment to enable the setting up of calls which are routed across different networking technologies. IEC 62379-5-3, onwards, specify management of aspects which are particular to individual networking technologies. IEC 62379-6, speci
29、fies carriage of control and status messages and non-audiovisual data over transports that do not support audio and video, such as RS232 serial links, with (as for IEC 62379-5) a separate subpart for each technology. IEC 62379-7 specifies aspects that are specific to the measurement of the service e
30、xperienced by audio and video streams and in particular to the requirements of EBU ECN-IPM Measurements Group. BS EN 62379-5-1:2014IEC 62379-5-1:2014 IEC 2014 7 COMMON CONTROL INTERFACE FOR NETWORKED DIGITAL AUDIO AND VIDEO PRODUCTS Part 5-1: Transmission over networks General 1 Scope This part of I
31、EC 62379 specifies aspects of the common control interface that are common to all network technologies, including setting up and tearing down of sessions and the service provided by the network. 2 Normative references The following documents, in whole or in part, are normatively referenced in this d
32、ocument and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 62379-1:2007, Common control interface for networked digital audio and video products
33、 Part 1: General IEC 62379-5-2:2014, Common control interface for networked digital audio and video products Part 5-2: Transmission over networks Signalling 3 Terms, definitions and abbreviations 3.1 Terms and definitions For the purposes of this document, the terms and definitions given in IEC 6237
34、9-1 and IEC 62379-5-2, as well as the following apply. 3.1.1 media port source or destination of media data in an interface unit Note 1 to entry: A media port is either a physical port (e.g. an external audio or video connector on the unit) or a logical port (e.g. an internal connection to another p
35、art of the unit). 3.1.2 switch network element which routes media data and other messages between links 3.2 Abbreviations TCP Transmission Control Protocol aUDP User Datagram Protocol bMIB Management Information Base aSee RFC 793. bSee RFC 768. BS EN 62379-5-1:2014 8 IEC 62379-5-1:2014 IEC 2014 4 Ne
36、twork service specifications 4.1 Service for live media Live media (including status broadcasts) shall be transmitted using a service for which, if the network supports it, guaranteed levels of throughput, delay, and data loss shall be requested. 4.2 Service for management messages Management messag
37、es should be transmitted in data units on an asynchronous flow as specified in IEC 62379-5-2. If no such service is available, a connectionless datagram service such as UDP may be used. Where a connection-oriented service is used, at least one call at each privilege level shall be accepted by a dest
38、ination unit at any given time. If more calls at one privilege level are accepted, this shall not prevent the acceptance of at least one call at each other privilege level. 5 MIB definitions applicable to all networks 5.1 General The structure of the MIB shall be as specified in IEC 62379-1. 5.2 Typ
39、e definitions The following application-wide types shall be used: NetPortState:= INTEGER disabled (1), closing (2), linkDown (3), linkUp (4), - does not know to what linked pointToPoint (5), - link is point-to-point peerGroup (6), - e.g. Ethernet hub sharedMedia (7) - with master, e.g. 802.11 (disab
40、ledsharedMedia) PortIdentifier:= OCTET STRING (SIZE(3) octet 1 = port type octets 2 and 3 = port number (high byte in octet 2) ConnectionEnd:= INTEGER source (1), destination (2) (sourcedestination) CauseCode:= OBJECT IDENTIFIER NOTE Cause codes may be defined in other parts of the IEC 62379-5 serie
41、s or elsewhere. ConnectionState:= INTEGER readyToConnect (1), connectionRequested (2), terminating (3), active (4), failed (5), disconnected (6), pending (7), inactive (8), finished (9), BS EN 62379-5-1:2014IEC 62379-5-1:2014 IEC 2014 9 callProceeding (10), receivedOffer (11), acceptedOffer (12), re
42、servationRequested (13), clearing (14) (readyToConnectclearing ) Importance:= INTEGER (1255) Priority:= INTEGER (1255) 5.3 Conceptual row type definitions The following types are used to specify the syntax of managed objects in this standard that represent conceptual table rows. NetPortEntry:= SEQUE
43、NCE nPortBlockId BlockId, nPortName Utf8String, nPortState NetPortState, nPortAddressType TDomain, nPortAddress TAddress, nPortPAddrType TDomain, nPortPartnerAddr TAddress, nPortBarred TruthValue UnitSourceEntry:= SEQUENCE usFlowIdentifier OCTET STRING, usBlockId SourceBlockId, usBlockInput IndexNum
44、ber, usPackageSize CardianlNumber, usPrivilege PrivilegeLevel, usState ConnectionState, usCause CauseCode, usSource Utf8String, usDestination Utf8String, usService Utf8String, usImportance Importance, usPriority Priority, uStartTime DateTime, usEndTime DateTime, usConnectTime CardinalNumber, usFlowI
45、dStandard TruthValue UnitDestEntry:= SEQUENCE udFlowIdentifier OCTET STRING, udNetBlockId SourceBlockId, udNetBlockOutput IndexNumber, udSourceAddrType TDomain, udSourceAddress TAddress, udPackageSize CardianlNumber, udPrivilege PrivilegeLevel, udState ConnectionState, udCause CauseCode, udSource Ut
46、f8String, udDestination Utf8String, udService Utf8String, udImportance Importance, udPriority Priority, BS EN 62379-5-1:2014 10 IEC 62379-5-1:2014 IEC 2014 udStartTime DateTime, udEndTime DateTime, udConnectTime CardinalNumber, udConnectCount CardinalNumber, udRemembered TruthValue, udDestBlockId De
47、stBlockId, udDestBlockInput IndexNumber, usFlowIdStandard TruthValue 5.4 MIB object definitions 5.4.1 Network ports 5.4.1.1 General Each physical connection to a network, in a switch or end equipment, shall be represented using a network port block. A network port block shall have one input for each
48、 outgoing media flow and one output for each incoming media flow. The group of objects in Table 1 shall be implemented by all switches. The root node for these objects shall be iso(1) standard(0) iec62379(62379) network(5) general (1) networkMIB(1) networkPorts(1) This node shall be used as the block type identifier for network port blocks. Table 1 Managed objects for network ports Identifier Syntax Index Readable Writable Volatile Syntax netPortTable(1) SEQUENCE OF NetPortEntry none none yes mandatory netPortEntry(1) NetPortEntry none none yes mandatory nPortBlockId(1) Bl
