1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI British StandardsWB9423_BSI_StandardColCov_noK_AW:BSI FRONT COVERS 5/9/08 12:55 Page 1Digital addressable lighting interface Part 202: Particular requirements for control gear Self-contained emergenc
2、y lighting (device type 1)BS EN 62386-202:2009National forewordThis British Standard is the UK implementation of EN 62386-202:2009. It isidentical to IEC 62386-202:2009.The UK participation in its preparation was entrusted by Technical CommitteeCPL/34, Lamps and related equipment, to Subcommittee CP
3、L/34/3, Auxiliariesfor lamps.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions of acontract. Users are responsible for its correct application. BSI 2009ISBN 978 0 580 57537 2ICS 2
4、9.140.50; 29.140.99Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of the StandardsPolicy and Strategy Committee on 31 October 2009Amendments issued since publicationAmd. No. Date Text affectedBRITISH STANDARDBS
5、EN 62386-202:2009EUROPEAN STANDARD EN 62386-202 NORME EUROPENNE EUROPISCHE NORM August 2009 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Central Secretariat: Avenue Marnix 17, B - 1000
6、 Brussels 2009 CENELEC - All rights of exploitation in any form and by any means reserved worldwide for CENELEC members. Ref. No. EN 62386-202:2009 E ICS 29.140.50; 29.140.99 English version Digital addressable lighting interface - Part 202: Particular requirements for control gear - Self-contained
7、emergency lighting (device type 1) (IEC 62386-202:2009) Interface dclairage adressable numrique - Partie 202: Exigences particulires pour les appareillages de commande - Blocs autonomes dclairage de secours (dispositifs de type 1) (CEI 62386-202:2009) Digital adressierbare Schnittstelle fr die Beleu
8、chtung - Teil 202: Besondere Anforderungen an Betriebsgerte - Notbeleuchtung mit Einzelbatterie (Gertetyp 1) (IEC 62386-202:2009) This European Standard was approved by CENELEC on 2009-07-01. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions
9、 for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three o
10、fficial versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical c
11、ommittees of Austria, Belgium, Bulgaria, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the
12、United Kingdom. BS EN 62386-202:2009EN 62386-202:2009 - 2 - Foreword The text of document 34C/880/FDIS, future edition 1 of IEC 62386-202, prepared by SC 34C, Auxiliaries for lamps, of IEC TC 34, Lamps and related equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC
13、as EN 62386-202 on 2009-07-01. This Part 202 is to be used in conjunction with EN 62386-101 and EN 62386-102, which contain general requirements for the relevant product type (control gear or control devices). The following dates were fixed: latest date by which the EN has to be implemented at natio
14、nal level by publication of an identical national standard or by endorsement (dop) 2010-04-01 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2012-07-01 Annex ZA has been added by CENELEC. _ Endorsement notice The text of the International Standard IEC
15、62386-202:2009 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 60598-1 NOTE Harmonized as EN 60598-1:2008 (modified). IEC 60669-2-1 NOTE Harmonized as EN 60669-2-
16、1:2004 (modified). IEC 60921 NOTE Harmonized as EN 60921:2004 (not modified). IEC 60923 NOTE Harmonized as EN 60923:2005 (not modified). IEC 60925 NOTE Harmonized as EN 60925:1991 (not modified). IEC 60929 NOTE Harmonized as EN 60929:2006 (not modified). IEC 61347-1 NOTE Harmonized as EN 61347-1:200
17、8 (modified). IEC 61347-2-3 NOTE Harmonized as EN 61347-2-3:2001 (not modified). IEC 61547 NOTE Harmonized as EN 61547:2009 (not modified). CISPR 15 NOTE Harmonized as EN 55015:2006 (not modified). _ BS EN 62386-202:2009- 3 - EN 62386-202:2009 Annex ZA (normative) Normative references to internation
18、al publications with their corresponding European publications The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendme
19、nts) applies. NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 62386-101 2009 Digital addressable lighting interface - Part 101: General requirements - System EN 62386-101 2009 IEC
20、62386-102 2009 Digital addressable lighting interface - Part 102: General requirements - Control gearEN 62386-102 2009 BS EN 62386-202:2009 2 62386-202 IEC:2009 CONTENTS FOREWORD.5 INTRODUCTION.7 1 Scope.8 2 Normative references .8 3 Terms and definitions .8 4 General 10 5 Electrical specifications
21、10 6 Interface power suppy 10 7 Transmission protocol structure10 8 Timing 10 9 Method of operation .10 10 Declaration of variables14 11 Definition of commands 15 12 Test procedures .26 Annex A (informative) Examples 104 Bibliography107 Figure 1 Example of light level definitions 12 Figure 2 Modes o
22、f operation 13 Figure 3 Application extended control or configuration command sequence example .16 Figure 4 Test sequence Features .27 Figure 5 Test sequence RESET30 Figure 6 Test sequence 100 ms-timeout .32 Figure 7 Test sequence Commands in-between .34 Figure 8 Test sequence Persistent memory 36 F
23、igure 9 Test sequence ON AND OFF39 Figure 10 Test sequence OFF WITH FADING.41 Figure 11 Test sequence Physical address allocation.42 Figure 12 Test sequence QUERY LAMP POWER ON.44 Figure 13 Test sequence REST45 Figure 14 Test sequence INHIBIT.47 Figure 15 Test sequence START/STOP FUNCTION TEST .48 F
24、igure 16 Test sequence FUNCTION TEST FAILURE 50 Figure 17 Test sequence FUNCTION TEST REQUEST PENDING52 Figure 18 Test sequence START/STOP DURATION TEST .53 Figure 19 Test sequence DURATION TEST FAILURE 54 Figure 20 Test sequence DURATION TEST REQUEST PENDING56 Figure 21 Test sequence TESTS IN PARAL
25、LEL .58 Figure 22 Test sequence LAMP TIMER 59 Figure 23 Test sequence STOP PENDING TEST .60 Figure 24 Test sequence STORE THE DTR AS EMERGENCY LEVEL .62 BS EN 62386-202:200962386-202 IEC:2009 3 Figure 25 Test sequence EMERGENCY LEVEL vs. MIN / MAX 64 Figure 26 Test sequence STORE TEST TIMING.66 Figu
26、re 27 Test sequence EXECUTE AUTOMATIC TEST 68 Figure 28 Test sequence STORE TEST EXECUTION TIMEOUT 70 Figure 29 Test sequence STORE PROLONG TIME 72 Figure 30 Test sequence START IDENTIFICATION73 Figure 31 Test sequence INTERFACE FAILURE 74 Figure 32 Test sequence QUERY BATTERY CHARGE.75 Figure 33 Te
27、st sequence QUERY HARDWIRED INHIBIT76 Figure 34 Test sequence QUERY HARDWIRED SWITCHED MAINS POWER 77 Figure 35 Test sequence QUERY PHYSICAL SELECTED 78 Figure 36 Test sequence REST: APPLICATION EXTENDED COMMAND SEQUENCE .80 Figure 37 Test sequence INHIBIT any IEC National Committee interested in th
28、e subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditio
29、ns determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC Nationa
30、l Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way i
31、n which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Pu
32、blication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC provides no marking procedure to indicate its approval and cannot be rendered responsible for any equipment declared to be in conformity with an IEC Publication. 6) All users should ensu
33、re that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of a
34、ny nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the ref
35、erenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. Inte
36、rnational Standard IEC 62386-202 has been prepared by subcommittee 34C: Auxiliaries for lamps, of IEC technical committee 34: Lamps and related equipment. The text of this standard is based on the following documents: FDIS Report on voting 34C/880/FDIS 34C/887/RVD Full information on the voting for
37、the approval of this standard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. This Part 202 is intended to be used in conjunction with IEC 62386-101 and IEC 62386-102, which contain general requir
38、ements for the relevant product type (control gear or control devices). BS EN 62386-202:2009 6 62386-202 IEC:2009 A list of all parts of the IEC 62386 series, under the general title: Digital addressable lighting interface, can be found on the IEC website. The committee has decided that the contents
39、 of this publication will remain unchanged until the maintenance result date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. BS EN 623
40、86-202:200962386-202 IEC:2009 7 INTRODUCTION This first edition of IEC 62386-202 is published in conjunction with IEC 62386-101 and IEC 62386-102. The division of IEC 62386 into separately published parts provides for ease of future amendments and revisions. Additional requirements will be added as
41、and when a need for them is recognized. This International Standard, and the other parts that make up IEC 62386-200 series, in referring to any of the clauses of IEC 62386-101 or IEC 62386-102, specify the extent to which such a clause is applicable and the order in which the tests are to be perform
42、ed; The parts also include additional requirements, as necessary. All parts that make up the IEC 62386-200 series are self-contained and therefore do not include references to each other. Where the requirements of any of the clauses of IEC 62386-101 or IEC 62386-102 are referred to in this Internati
43、onal Standard by the statement “The requirements of IEC 62386-1XX, clause “n” apply”, this sentence is to be interpreted as meaning that all requirements of the clause in question of Part 101 or Part 102 apply, except any which are inapplicable to the specific type of lamp control gear covered by th
44、is Part 202. All numbers used in this International Standard are decimal numbers unless otherwise noted. Hexadecimal numbers are given in the format 0xVV, where VV is the value. Binary numbers are given in the format XXXXXXXXb or in the format XXXX XXXX, where X is 0 or 1; x in binary numbers means
45、dont care. BS EN 62386-202:2009 8 62386-202 IEC:2009 DIGITAL ADDRESSABLE LIGHTING INTERFACE Part 202: Particular requirements for control gear Self-contained emergency lighting (device type 1) 1 Scope This International Standard specifies a protocol and test procedures for the control by digital sig
46、nals of electronic control gear for use on a.c. or d.c. supplies, associated with self-contained emergency lighting. NOTE Tests in this standard are type tests. Requirements for testing individual control gear during production are not included. 2 Normative references The following referenced docume
47、nts are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 62386-101:2009, Digital addressable lighting interface Part 101: General req
48、uirements System IEC 62386-102:2009, Digital addressable lighting interface Part 102: General requirements Control gear 3 Terms and definitions For the purposes of this document, the terms and definitions given in Clause 3 of IEC 62386-101:2009 and Clause 3 of IEC 62386-102:2009 apply, together with
49、 the following. 3.1 normal mode (for self-contained emergency control gear) mode in which mains supply is available, with the battery charged or charging 3.2 emergency mode (for self-contained emergency control gear) mode in which mains supply has failed and whilst the control gear is powered by the battery until deep discharge poin
