1、raising standards worldwideNO COPYING WITHOUT BSI PERMISSION EXCEPT AS PERMITTED BY COPYRIGHT LAWBSI Standards PublicationDigital addressable lighting interfacePart 209: Particular requirements for control gear Colour control (device type 8)BS EN 62386-209:2011National forewordThis British Standard
2、is the UK implementation of EN 62386-209:2011. It is identical to IEC 62386-209:2011.The UK participation in its preparation was entrusted by Technical Com-mittee CPL/34, Lamps and Related Equipment, to Subcommittee CPL/34/3, Auxiliaries for lamps.A list of organizations represented on this committe
3、e can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. BSI 2011ISBN 978 0 580 62957 0 ICS 29.140.50; 29.140.99Compliance with a British Standard cannot confer immunity f
4、rom legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 August 2011.Amendments issued since publicationAmd. No. Date Text affectedBRITISH STANDARDBS EN 62386-209:2011EUROPEAN STANDARD EN 62386-209 NORME EUROPENNE EUROPISCHE N
5、ORM August 2011 CENELEC European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung Management Centre: Avenue Marnix 17, B - 1000 Brussels 2011 CENELEC - All rights of exploitation in any form and by any mea
6、ns reserved worldwide for CENELEC members. Ref. No. EN 62386-209:2011 E ICS 29.140.50; 29.140.99 English version Digital addressable lighting interface - Part 209: Particular requirements for control gear - Colour control (device type 8) (IEC 62386-209:2011) Interface dclairage adressable numrique -
7、 Partie 209: Exigences particulires pour les appareillages de commande - Commande de la couleur (Type de dispositif 8) (CEI 62386-209:2011) Digital adressierbare Schnittstelle fr die Beleuchtung - Teil 209: Besondere Anforderungen an Betriebsgerte - Farbsteuerung (Gertetyp 8) (IEC 62386-209:2011) Th
8、is European Standard was approved by CENELEC on 2011-07-29. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical re
9、ferences concerning such national standards may be obtained on application to the Central Secretariat or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELE
10、C member into its own language and notified to the Central Secretariat has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, France, Germany, Greece, Hu
11、ngary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland and the United Kingdom. BS EN 62386-209:2011EN 62386-209:2011 - 2 - Foreword The text of document 34C/964/FDIS, future edition 1 of
12、 IEC 62386-209, prepared by SC 34C, Auxiliaries for lamps, of IEC TC 34, Lamps and related equipment, was submitted to the IEC-CENELEC parallel vote and was approved by CENELEC as EN 62386-209 on 2011-07-29. Attention is drawn to the possibility that some of the elements of this document may be the
13、subject of patent rights. CEN and CENELEC shall not be held responsible for identifying any or all such patent rights. The following dates were fixed: latest date by which the EN has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2012-04-
14、29 latest date by which the national standards conflicting with the EN have to be withdrawn (dow) 2014-07-29 Annex ZA has been added by CENELEC. _ Endorsement notice The text of the International Standard IEC 62386-209:2011 was approved by CENELEC as a European Standard without any modification. In
15、the official version, for Bibliography, the following notes have to be added for the standards indicated: 1 IEC 60598-1 NOTE Harmonized as EN 60598-1. 2 IEC 60669-2-1 NOTE Harmonized as EN 60669-2-1. 3 IEC 60921 NOTE Harmonized as EN 60921. 4 IEC 60923 NOTE Harmonized as EN 60923. 5 IEC 60929 NOTE H
16、armonized as EN 60929. 6 IEC 61347-1 NOTE Harmonized as EN 61347-1. 7 IEC 61347-2-3 NOTE Harmonized as EN 61347-2-3. 8 IEC 61547 NOTE Harmonized as EN 61547. 9 IEC 62384 NOTE Harmonized as EN 62384. 10 CISPR 15 NOTE Harmonized as EN 55015. _ BS EN 62386-209:2011- 3 - EN 62386-209:2011 Annex ZA (norm
17、ative) Normative references to international publications with their corresponding European publications The following referenced documents are indispensable for the application of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the
18、referenced document (including any amendments) applies. NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year IEC 62386-101 2009 Digital addressable lighting interface - Part 101: General re
19、quirements - System EN 62386-101 2009 IEC 62386-102 2009 Digital addressable lighting interface - Part 102: General requirements - Control gearEN 62386-102 2009 CIE 1931 Commission internationale de lEclairage - Proceedings - - CIE 17.4 1987 International Lighting Vocabulary - - BS EN 62386-209:2011
20、 2 62386-209 IEC:2011 CONTENTS INTRODUCTION . 10 1 Scope . 11 2 Normative references . 11 3 Terms and definitions . 11 4 General 13 4.4 Colour type 13 4.4.1 General . 13 4.4.2 Colour type: xy-coordinate . 14 4.4.3 Colour type: colour temperature Tc14 4.4.4 Colour type: primary N . 15 4.4.5 Colour ty
21、pe: RGBWAF . 15 5 Electrical specification 16 6 Interface power supply . 16 7 Transmission protocol Structure . 16 8 Timing 16 9 Method of operation . 16 9.1 Logarithmic dimming curve, arc power levels and accuracy . 16 9.1.1 Colour light output versus arc power level . 16 9.1.2 Direct arc power lev
22、el 16 9.1.3 Indirect arc power levels 17 9.2 Power on . 18 9.2.1 General . 18 9.2.2 Store power on colour . 18 9.2.3 Query power on colour 18 9.3 Interface-failure . 19 9.3.1 General . 19 9.3.2 Store system failure colour 19 9.3.3 Query system failure colour . 19 9.4 Min and max level . 20 9.5 Fade
23、time and fade rate 20 9.6 Reaction to commands during error state 20 9.9 16 Bit data transfer for the application extended control commands 20 9.10 Multi colour type control gear 20 9.11 Colour scenes . 21 9.11.1 General . 21 9.11.2 Store colour scene XXXX 21 9.11.3 Remove colour scene XXXX 21 9.11.
24、4 Go to colour scene XXXX 21 9.11.5 Query colour scene XXXX . 22 9.12 Colour change . 22 9.12.1 Colour type xy-coordinate 22 9.12.2 Colour type colour temperature Tc. 22 9.12.3 Colour type change . 22 9.12.4 Temporary colour setting . 22 BS EN 62386-209:201162386-209 IEC:2011 3 9.12.5 Activate colou
25、r settings . 23 9.12.6 Reporting colour settings . 26 9.12.7 Copy from report to temporary variables 26 9.13 Colour temperature Tclimits . 26 10 Declaration of variables 27 11 Definition of commands 30 11.1 Arc power control commands. 30 11.1.1 Direct arc power control command . 30 11.1.2 Indirect a
26、rc power control commands 30 11.2 Configuration commands . 31 11.2.1 General configuration commands 31 11.2.2 Arc power parameters settings 31 11.2.3 System parameters settings 32 11.3 Query commands 32 11.3.1 Queries related to status information . 32 11.3.2 Queries related to arc power parameters
27、settings 32 11.3.3 Queries related to system parameter settings 33 11.3.4 Application extended commands . 33 11.4 Special commands 42 11.4.4 Extended special commands . 42 11.5 Summary of the command set . 42 11.5.1 Summary of the extended application command set 42 11.5.2 Command versus colour type
28、 cross-reference . 43 11.5.3 Command versus the DTR, DTR1 and DTR2 cross-reference table . 44 12 Test procedures . 46 12.2 Test sequences Configuration commands 46 12.2.1 Test sequences General configuration commands 46 12.7 Test sequences Application extended commands for device type 8 66 12.7.1 Te
29、st sequences APPLICATION EXTENDED QUERY COMMANDS 66 12.7.2 Test sequences Application extended configuration commands . 83 12.7.3 Test sequence ENABLE DEVICE TYPE . 157 12.7.4 Test sequences “Application extended control commands” 160 12.7.5 Test sequences Standard application extended commands 195
30、13 General subsequences . 197 13.1 Test sequence “Set16bitValue (val)” 197 13.2 Test sequence “SetSpecific16bitValue (val)” . 198 13.3 Test sequence “Get16bitValue ( )” . 199 13.4 Test sequence “Get16bitColourValue ( )” . 200 Bibliography 201 Figure 1 The CIE color space chromaticity diagram, 1931 C
31、ambridge University Press 14 Figure 2 Black body line . 15 Figure 3 Colour temperature diagram . 15 Figure 4 Application extended configuration command sequence example . 36 Figure 5 Test sequence “RESET” . 47 Figure 6 Test sequence “testResetDefault (Colour Type)” 48 Figure 7 Test sequence “testRes
32、et_xy” 50 BS EN 62386-209:2011 4 62386-209 IEC:2011 Figure 8 Test sequence “testReset_Tc” 52 Figure 9 Test sequence “testReset_PrimaryN” . 54 Figure 10 Test sequence “testReset_RGBWAF” . 56 Figure 11 Test sequence “testResetNoChange_xy” 57 Figure 12 Test sequence “testResetNoChange_Tc” . 59 Figure 1
33、3 Test sequence “testResetNoChange_PrimaryN” . 61 Figure 14 Test sequence “testResetNoChange_RGBWAF” 62 Figure 15 Test sequence “testResetIndependentColourType” 63 Figure 16 Test sequence “Save_PrimaryN” 64 Figure 17 Test sequence “Restore_PrimaryN (xPrimary, yprimary, TYPrimary” 65 Figure 18 Test s
34、equence “QUERY GEAR FEATURES/STATUS” 66 Figure 19 Test sequence “QUERY COLOUR STATUS” 68 Figure 20 Test sequence “ActivateAndCheck (ColourType, curActive)” 69 Figure 21 Test sequence “xyOutOfRangeCheck( )” 71 Figure 22 Test sequence “TcOutOfRangeCheck” . 72 Figure 23 Test sequence “CheckOnlyOneColou
35、rTypeActive” . 73 Figure 24 Test sequence “TcOutOfRangePhysWarmest” 74 Figure 25 Test sequence “TcOutOfRangeCheckPhysCoolest” 75 Figure 26 Test sequence QUERY COLOUR TYPE FEATURES 76 Figure 27 Test sequence QUERY COLOUR VALUE . 79 Figure 28 Test sequence “QUERY RGBWAF CONTROL” . 81 Figure 29 test se
36、quence “QUERY ASSIGNED COLOUR” . 82 Figure 30 Test sequence “STORE TY PRIMARY N” . 84 Figure 31 Test sequence “CheckDTR2Behaviour8(nrPrim)” . 85 Figure 32 Test sequence “STORE xy-COORDINATE PRIMARY N” 87 Figure 33 Test sequence “CheckDTR2Behaviour_XY(nrPrim)” . 89 Figure 34 Test sequence “STORE COLO
37、UR TEMPERATURE Tc LIMIT” 90 Figure 35 Test sequence “TcCheckDTR2Behaviour( )” . 91 Figure 36 Test sequence “TcSavePhysicalLimits” 92 Figure 37 Test sequence “TcRestorePhysicalLimits(phLimits) 93 Figure 38 Test sequence “TcCheckLimits” . 95 Figure 39 Test sequence “STORE GEAR FEATURES/STATUS” 96 Figu
38、re 40 Test sequence “AUTOMATIC ACTIVATE” 97 Figure 41 Test sequence “AutoActivate_xy (min_level, command, delay, expected_level)” . 98 Figure 42 Test sequence “NoAutoActivate_xy (min_level, command, delay, expected_level)” . 99 Figure 43 Test sequence “AutoActivate_Tc (min_level, command, delay, exp
39、ected_level)” . 100 Figure 44 Test sequence “NoAutoActivate_Tc (min_level, command, delay, expected_level)” . 101 Figure 45 Test sequence “AutoActivate_PrimaryN (min_level, command, delay, expected_level)” . 102 Figure 46 Test sequence “NoAutoActivate_PrimaryN (min_level, command, delay, expected_le
40、vel)” . 103 BS EN 62386-209:201162386-209 IEC:2011 5 Figure 47 Test sequence “AutoActivate_RGBWAF (min_level, command, delay, expected_level)” . 104 Figure 48 Test sequence “NoAutoActivate_RGBWAF (min_level, command, delay, expected_level)” . 105 Figure 49 Test sequence “AutoActivate_Dapc0” . 106 Fi
41、gure 50 Test sequence “AutoActivate_Off” 107 Figure 51 Test sequence “Load_xy_Coordinate (point_x, point_y)” 108 Figure 52 Test sequence “Get_actual_xy ( )” . 109 Figure 53 Test sequence “findTwoValid_Tc_Points ( )” 110 Figure 54 Test sequence “Load_Tc (Tc_value)” . 111 Figure 55 Test sequence “Get_
42、actual_Tc ( )” . 112 Figure 56 Test sequence “findTwoValid_PrimaryN_Points ( )” 113 Figure 57 Test sequence “Load_PrimaryN(point_PrimaryN)” 114 Figure 58 Test sequence “Get_actual_PrimaryN ( )” . 115 Figure 59 Test sequence “findTwoValid_RGBWAF_Pionts ( )” . 116 Figure 60 Test sequence “Load_RGBWAF(
43、point_RGBWAF)” . 117 Figure 61 Test sequence “Get_actual_RGBWAF ( )” 118 Figure 62 Test sequence “ToggleAutoActivation(auto)” 119 Figure 63 Test sequence “ASSIGN COLOUR TO LINKED CHANNEL” . 120 Figure 64 Test sequence “START AUTO CALIBRATION” . 122 Figure 65 Test sequence “POWER ON COLOUR” 123 Figur
44、e 66 Test sequence “PowerOnBehaviour_xy” . 125 Figure 67 Test sequence “PowerOnBehaviour_Tc” 127 Figure 68 Test sequence “PowerOnBehaviour_PrimaryN” 129 Figure 69 Test sequence “PowerOnBehaviour_RGBWAF” . 131 Figure 70 Test sequence “PowerOnBehaviourMask_xy” . 132 Figure 71 Test sequence “PowerOnBeh
45、aviourMask_Tc” 133 Figure 72 Test sequence “PowerOnBehaviourMask_PrimaryN” 135 Figure 73 Test sequence “PowerOnBehaviourMask_RGBWAF” . 137 Figure 74 Test sequence “SYSTEM FAILURE” . 139 Figure 75 Test sequence “SystemFailureBehaviour_xy” . 141 Figure 76 Test sequence “SystemFailureBehaviour_Tc” . 14
46、3 Figure 77 Test sequence “SystemFailureBehaviourPrimaryN” 145 Figure 78 Test sequence “SystemFailureBehaviour_RGBWAF” 147 Figure 79 Test sequence “SystemFailureBehaviourMask_xy” . 148 Figure 80 Test sequence “SystemFailureBehaviourMask_Tc” 149 Figure 81 Test sequence “SystemFailureBehaviourMask_Pri
47、maryN” 151 Figure 82 Test sequence “SystemFailureBehaviourMask_RGBWAF” . 153 Figure 83 Test sequence “STORE THE DTR AS SCENE XXXX/ GOTO SCENE XXXX”. 155 Figure 84 Test sequence “SetTemporaries (col, val)” . 156 Figure 85 Test sequence “ENABLE DEVICE TYPE: Application extended commands” . 158 Figure
48、86 Test sequence “ENABLE DEVICE TYPE: Application extended configuration commands” 159 BS EN 62386-209:2011 6 62386-209 IEC:2011 Figure 87 Test sequence “SET TEMPORARY x-COORDINATE” 160 Figure 88 Test sequence “SET TEMPORARY y-COORDINATE” 161 Figure 89 Test sequence “ACTIVATE” . 162 Figure 90 Test sequence “FindTwoValid_xy_Points (point1_x, point1_y, point2_x, point2_y)” . 163 Figure 91 Test sequence “Goto_xy_Coordinate (Point_x, point_y)” 164 Figure 92 Test sequence “x-COORDINATE STEP UP” . 165 Figure 93 Test sequence “ActivateColourType (Colour Type)” . 166 Figure 94
