1、BSI Standards PublicationUniversal Serial Bus interfaces for data and powerPart 2-2: Universal Serial Bus Micro-USB Cables and Connectors Specification, Revision 1.01 (TA 14)BS EN 62680-2-2:2015National forewordThis British Standard is the UK implementation of EN 62680-2-2:2015. It isidentical to IE
2、C 62680-2-2:2015.The UK participation in its preparation was entrusted to TechnicalCommittee EPL/100, Audio, video and multimedia systems and equipment.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all th
3、e necessary provisions ofa contract. Users are responsible for its correct application. The British Standards Institution 2015.Published by BSI Standards Limited 2015ISBN 978 0 580 88002 5ICS 29.220; 33.120; 35.200Compliance with a British Standard cannot confer immunity fromlegal obligations.This B
4、ritish Standard was published under the authority of theStandards Policy and Strategy Committee on 31 December 2015.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 62680-2-2:2015EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 62680-2-2 December 2015 ICS 29.
5、220; 33.120; 35.200 English Version Universal Serial Bus interfaces for data and power - Part 2-2: Universal Serial Bus - Micro-USB Cables and Connectors Specification, Revision 1.01 (TA 14) (IEC 62680-2-2:2015) Interfaces de bus universel en srie pour les donnes et lalimentation lectrique - Partie
6、2-2 : bus universel en srie - Spcification des cbles et connecteurs micro-USB, rvision 1.01 (TA 14) (IEC 62680-2-2:2015) Schnittstellen des Universellen Seriellen Busses fr Daten und Energie - Teil 2-2: Festlegung fr Mikro-USB-Kabel und -Steckverbinder, berarbeitung 1.01 (IEC 62680-2-2:2015) This Eu
7、ropean Standard was approved by CENELEC on 2015-10-14. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical referen
8、ces concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a C
9、ENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugos
10、lav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Stand
11、ardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 62680-
12、2-2:2015 E BS EN 62680-2-2:2015EN 62680-2-2:2015 2 European foreword The text of document 100/2332/CDV, future edition 1 of IEC 62680-2-2, prepared by Technical Area 14 “Interfaces and methods of measurement for personal computing equipment“ of IEC/TC 100 “Audio, video and multimedia systems and equ
13、ipment“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 62680-2-2:2015. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2016-07-14 latest dat
14、e by which the national standards conflicting with the document have to be withdrawn (dow) 2018-10-14 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such
15、 patent rights. Endorsement notice The text of the International Standard IEC 62680-2-2:2015 was approved by CENELEC as a European Standard without any modification. BS EN 62680-2-2:2015 2 IEC 62680-2-2:2015 IEC 2015 USB-IF 2014 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ UNIVERSAL SERIAL BUS INTERF
16、ACES FOR DATA AND POWER Part 2-2: Micro-USB Cables and Connectors Specification, Revision 1.01 FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of
17、IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PA
18、S) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising wit
19、h the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as ne
20、arly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in th
21、at sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committe
22、es undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide
23、any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest
24、edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether
25、 direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indis
26、pensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 62680-
27、2-2 has been prepared by technical area 14: Interfaces and methods of measurement for personal computing equipment, of IEC technical committee 100: Audio, video and multimedia systems and equipment. The text of this standard is based on documents prepared by the USB Implementers Forum (USB-IF). The
28、structure and editorial rules used in this publication reflect the practice of the organization which submitted it. BS EN 62680-2-2:2015IEC 62680-2-2:2015 IEC 2015 3 USB-IF 2014 The text of this standard is based on the following documents: CDV Report on voting 100/2332/CDV 100/2435/RVC Full informa
29、tion on the voting for the approval of this standard can be found in the report on voting indicated in the above table. A list of all the parts in the IEC 62680 series, published under the general title Universal serial bus interfaces for data and power can be found on the IEC website. The committee
30、 has decided that the contents of this publication will remain unchanged until the stability date indicated on the IEC website under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, o
31、r amended. A bilingual version of this publication may be issued at a later date. IMPORTANT The colour inside logo on the cover page of this publication indicates that it contains colours which are considered to be useful for the correct understanding of its contents. Users should therefore print th
32、is document using a colour printer. BS EN 62680-2-2:2015 4 IEC 62680-2-2:2015 IEC 2015 USB-IF 2014 INTRODUCTION The IEC 62680 series is based on a series of specifications that were originally developed by the USB Implementers Forum (USB-IF). These specifications were submitted to the IEC under the
33、auspices of a special agreement between the IEC and the USB-IF. The USB Implementers Forum, Inc.(USB-IF) is a non-profit corporation founded by the group of companies that developed the Universal Serial Bus specification. The USB-IF was formed to provide a support organization and forum for the adva
34、ncement and adoption of Universal Serial Bus technology. The Forum facilitates the development of high-quality compatible USB peripherals (devices), and promotes the benefits of USB and the quality of products that have passed compliance testing. ANY USB SPECIFICATIONS ARE PROVIDED TO YOU “AS IS, “W
35、ITH NO WARRANTIES WHATSOEVER, INCLUDING ANY WARRANTY OF MERCHANTABILITY, NON-INFRINGEMENT, OR FITNESS FOR ANY PARTICULAR PURPOSE. THE USB IMPLEMENTERS FORUM AND THE AUTHORS OF ANY USB SPECIFICATIONS DISCLAIM ALL LIABILITY, INCLUDING LIABILITY FOR INFRINGEMENT OF ANY PROPRIETARY RIGHTS, RELATING TO U
36、SE OR IMPLEMENTATION OR INFORMATION IN THIS SPECIFICAITON. THE PROVISION OF ANY USB SPECIFICATIONS TO YOU DOES NOT PROVIDE YOU WITH ANY LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS. Entering into USB Adopters Agreements may, however, allow a signing comp
37、any to participate in a reciprocal, royalty-free licensing arrangement for compliant products. For more information, please see: http:/www.usb.org/developers/docs/ http:/www.usb.org/developers/devclass_docs#approved IEC DOES NOT TAKE ANY POSITION AS TO WHETHER IT IS ADVISABLE FOR YOU TO ENTER INTO A
38、NY USB ADOPTERS AGREEMENTS OR TO PARTICIPATE IN THE USB IMPLEMENTERS FORUM.” This series covers the Universal Series Bus interfaces for data and power and consists of the following parts: IEC 62680-1-1, Universal Serial Bus interfaces for data and power Part 1-1: Common components USB Battery Chargi
39、ng Specification, Revision 1.2 IEC 62680-2-1, Universal Serial Bus interfaces for data and power Part 2-1: Universal Serial Bus Specification, Revision 2.0 IEC 62680-2-2, Universal Serial Bus interfaces for data and power Part 2-2: USB Micro-USB Cables and Connectors Specification, Revision 1.01 IEC
40、 62680-2-3, Universal Serial Bus interfaces for data and power Part 2-3: Universal Serial Bus Cables and Connectors Class Document Revision 2.0 This part of the IEC 62680 series consists of several distinct parts: the main body of the text, which consists of the original specification and all ECN an
41、d Errata developed by the USB-IF. BS EN 62680-2-2:2015IEC 62680-2-2:2015 IEC 2015 5 USB-IF 2014 CONTENTS FOREWORD . 2 INTRODUCTION . 4 1 Introduction . 10 1.1 General . 10 1.2 Objective of the Specification 10 1.3 Intended Audience/Scope . 10 1.4 Related Documents . 10 2 Acronyms and Terms . 10 3 Si
42、gnificant Features . 11 3.1 USB 2.0 Specification Compliance 11 3.2 On-The-Go Device 12 3.3 Connectors . 12 3.4 Compliant Cable Assemblies . 12 3.5 Plug Overmolds 12 4 Cables and Connectors . 13 4.1 Introduction . 13 4.2 Micro-Connector Mating 13 4.3 Color Coding . 13 4.4 Device, Cable and Adapter D
43、elays 14 4.5 Compliant Usage of Connectors and Cables . 15 4.5.1 Cables . 15 4.5.2 Overmolds . 15 4.5.3 Mechanical Interfaces) . 15 4.5.4 Surface mount standard version drawings . 15 4.5.5 DIP-type and Midmount-type receptacles . 15 4.5.6 Connector Keying 15 4.5.7 Right Angle Plugs 15 4.5.8 Adapters
44、 16 4.6 Drawings. 17 5 Electrical Compliance Requirements 35 5.1 Data Rates Beyond USB 2.0 (480 Mb/s ) 36 5.2 Low Level Contact Resistance 36 5.3 Contact Current Rating . 36 5.3.1 Signal Contacts Only (2, 3, and 4) . 36 5.3.2 With Power Applied Contacts (1 and 5) 36 6 Mechanical Compliance Requireme
45、nts 36 6.1 Operating Temperature Range 36 6.1.1 Option I . 36 6.1.2 Option II 36 6.2 Insertion Force 36 6.3 Extraction Force 36 6.4 Plating 37 6.4.1 Option I . 37 6.4.2 Option II 37 6.5 Solderability 37 BS EN 62680-2-2:2015 6 IEC 62680-2-2:2015 IEC 2015 USB-IF 2014 6.6 Peel Strength (Reference Only)
46、 37 6.7 Wrenching Strength (Reference Only) . 37 6.8 Lead Co-Planarity . 37 6.9 RoHS Compliance . 37 6.10 Shell edited three pictures (Figure 4-10, 4-11 and 4-12). 1.03RC 12/11/2006 Two pictures edited (Figure 4-8 and 4-9). In fig 4-8 max height to be 2.8 mm MAX. In fig 4-9 R0.25 mm MAX to be R0.30
47、mm MAX. 1.0RC3 12/19/2006 For BoD approval 1.0 1/12/2007 Approved 1.0 1/22/2007 Cosmetic edits for publication 1.01 4/4/2007 Editorial corrections and additions to contributor list. Reinserted shell and plug material requirements as section 6.10, Clarified wording on Plating Recommendations. Copyrig
48、ht 2006 USB Implementers Forum, Inc. (USB-IF). All rights reserved. BS EN 62680-2-2:2015 8 IEC 62680-2-2:2015 IEC 2015 USB-IF 2014 A LICENSE IS HEREBY GRANTED TO REPRODUCE THIS SPECIFICATION FOR INTERNAL USE ONLY. NO OTHER LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, IS GRANTED OR INTENDED
49、 HEREBY. USB-IF AND THE AUTHORS OF THIS SPECIFICATION EXPRESSLY DISCLAIM ALL LIABILITY FOR INFRINGEMENT OF INTELLECTUAL PROPERTY RIGHTS, RELATING TO IMPLEMENTATION OF INFORMATION IN THIS SPECIFICATION. USB-IF AND THE AUTHORS OF THIS SPECIFICATION ALSO DO NOT WARRANT OR REPRESENT THATSUCH IMPLEMENTATION(S) WILL NOT INFRINGE THE INTELLECTUAL PROPERTY RIGHTS OF OTHERS. THIS SPECIFICATION IS PROVIDED “AS IS“ AND WITH NO WARRANTIES, EXPRESS OR IMPLIED, STATUTORY OR OTHERWISE
