1、BSI Standards PublicationThyristor valves for thyristor controlled series capacitors (TCSC) Electrical testingBS EN 62823:2015National forewordThis British Standard is the UK implementation of EN 62823:2015. It is identical to IEC 62823:2015.The UK participation in its preparation was entrusted to T
2、echnicalCommittee PEL/22, Power electronics.A list of organizations represented on this committee can be obtained onrequest to its secretary.This publication does not purport to include all the necessary provisions ofa contract. Users are responsible for its correct application. The British Standard
3、s Institution 2015.Published by BSI Standards Limited 2015ISBN 978 0 580 80358 1ICS 29.240.99 Compliance with a British Standard cannot confer immunity fromlegal obligations.This British Standard was published under the authority of theStandards Policy and Strategy Committee on 31 December 2015.Amen
4、dments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 62823:2015EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 62823 November 2015 ICS 29.240.99 English Version Thyristor valves for thyristor controlled series capacitors (TCSC) - Electrical testing (IEC 62823:2015)
5、Valves thyristors pour condensateurs srie commands par thyristors (CSCT) - Essai lectrique (IEC 62823:2015) Thyristorventile fr thyristorgesteuerte Reihenkondensatoren (TCSC) - Elektrische Prfung (IEC 62823:2015) This European Standard was approved by CENELEC on 2015-09-24. CENELEC members are bound
6、 to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN
7、-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management C
8、entre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, I
9、taly, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee f
10、r Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2015 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 62823:2015 E BS EN 62823:2015EN 62823:2015 2 European foreword The text of document 22
11、F/342/CDV, future edition 1 of IEC 62823, prepared by SC 22F “Power electronics for electrical transmission and distribution systems“, of IEC/TC 22 “Power electronic systems and equipment“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 62823:2015. The following dates ar
12、e fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2016-06-24 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2018-09-24 Attention is drawn to
13、 the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 62823:2015 was approved by CENELEC as a Europ
14、ean Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 60068-1 NOTE Harmonized as EN 60068-1. IEC 60143-1 NOTE Harmonized as EN 60143-1. IEC 60721-1 NOTE Harmonized as EN 60721-1. IEC 61000-6-5 NOTE Harm
15、onized as EN 61000-6-5. IEC 61954 NOTE Harmonized as EN 61954. BS EN 62823:2015EN 62823:2015 3 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this docum
16、ent and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indicated
17、 by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 60060-1 2010 High-voltage test techniques - Part 1: General definitions and test require
18、ments EN 60060-1 2010 IEC 60071-1 - Insulation co-ordination - Part 1: Definitions, principles and rules EN 60071-1 - IEC 60071-2 - Insulation co-ordination - Part 2: Application guide EN 60071-2 - IEC 60270 - High-voltage test techniques - Partial discharge measurements EN 60270 - BS EN 62823:2015
19、2 IEC 62823:2015 IEC 2015 CONTENTS FOREWORD . 5 1 Scope 7 2 Normative references 7 3 Terms and definitions 7 4 TCSC valve and valve operation in general . 10 4.1 TCSC installation and TCSC valve 10 4.2 TCSC valve current and voltage at capacitive boost operation 12 4.2.1 General . 12 4.2.2 Waveshape
20、s of valve current and voltage in capacitive boost operation 12 4.2.3 Formulas for TCSC valve current and voltage stresses calculation 13 4.3 Typical operating pattern of TCSC installation 15 5 General requirements 15 5.1 Guidelines for the performance of type tests . 15 5.1.1 Evidence in lieu . 15
21、5.1.2 Sequence of tests 16 5.1.3 Ambient temperature for testing . 16 5.1.4 Frequency for testing . 16 5.1.5 Test reports . 16 5.2 Test conditions for dielectric tests . 16 5.2.1 General . 16 5.2.2 Treatment of redundancy in dielectric tests 16 5.2.3 Atmospheric correction factor 17 5.3 Test conditi
22、ons for operational tests 17 5.3.1 General . 17 5.3.2 Treatment of redundancy in operational tests 17 5.4 Criteria for successful type testing 18 5.4.1 General . 18 5.4.2 Criteria applicable to valve levels 18 5.4.3 Criteria applicable to the valve as a whole . 19 6 Summary of tests . 19 7 Dielectri
23、c tests between valve terminals and valve enclosure 20 7.1 Purpose of tests 20 7.2 Test object 21 7.3 Test requirements . 21 7.3.1 AC test 21 7.3.2 Lightning impulse test 22 8 Dielectric tests between valve terminals 22 8.1 Purpose of tests 22 8.2 Test object 22 8.3 Test requirements . 23 8.3.1 AC t
24、est 23 8.3.2 Switching impulse test . 24 9 Periodic firing and extinction tests . 24 9.1 Purpose of tests 24 9.2 Test object 24 BS EN 62823:2015IEC 62823:2015 IEC 2015 3 9.3 Test requirements . 25 9.3.1 General . 25 9.3.2 Maximum continuous capacitive boost test 25 9.3.3 Maximum temporary capacitive
25、 boost test . 26 9.3.4 Minimum capacitive boost test . 26 9.3.5 Operation at bypass. 27 10 Fault current tests . 29 10.1 Purpose of tests 29 10.2 Test object 29 10.3 Test requirements . 29 10.3.1 Fault current without subsequent blocking . 29 10.3.2 Fault current with subsequent blocking 29 11 Test
26、for valve insensitivity to electromagnetic disturbance . 30 11.1 Purpose of tests 30 11.2 Test object 30 11.3 Test requirements . 30 12 Testing of special features . 30 12.1 Purpose of tests 30 12.2 Test object 31 12.3 Test requirements . 31 13 Routine tests . 31 13.1 General . 31 13.2 Visual inspec
27、tion . 31 13.3 Connection check . 31 13.4 Voltage grading circuit check 31 13.5 Voltage withstand check . 31 13.6 Partial discharge tests 31 13.7 Check of auxiliaries . 32 13.8 Firing check 32 13.9 Cooling system pressure test 32 14 Presentation of type test results 32 Annex A (informative) TCSC val
28、ve operating and rating considerations . 33 A.1 Overview. 33 A.2 TCSC characteristics 33 A.3 Operating range 34 A.4 Reactive power rating . 35 A.5 Power oscillation damping (POD) 35 A.6 SSR mitigation 35 A.7 Harmonics 36 A.8 Control interactions between TCSCs in parallel lines 36 A.9 Operating range
29、, overvoltages and duty cycles . 36 A.9.1 Operating range . 36 A.9.2 Transient overvoltages 36 A.9.3 Duty cycles 37 Annex B (informative) Valve component fault tolerance 38 Bibliography 39 BS EN 62823:2015 4 IEC 62823:2015 IEC 2015 Figure 1 Typical connection and nomenclature of a TCSC installation
30、11 Figure 2 TCSC subsegment . 11 Figure 3 TCSC steady state waveforms for control angle and conduction interval 12 Figure 4 Thyristor valve voltage in a TCSC 13 Figure 5 Example of operating range diagram for TCSC 15 Figure A.1 TCSC power frequency steady state apparent reactance characteristics acc
31、ording to Formula (A.1) with = 2,5 . 34 Table 1 Valve level faults permitted during type tests . 19 Table 2 List of tests . 20 Table A.1 Peak and RMS voltage relationships 33 BS EN 62823:2015IEC 62823:2015 IEC 2015 5 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ THYRISTOR VALVES FOR THYRISTOR CONTROLL
32、ED SERIES CAPACITORS (TCSC) ELECTRICAL TESTING FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on
33、all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Pub
34、lication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation.
35、IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of
36、opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made
37、to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transpare
38、ntly to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certi
39、fication bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability sha
40、ll attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including leg
41、al fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this pub
42、lication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 62823 has been prepared by subcommittee 22F: Power ele
43、ctronics for electrical transmission and distribution systems, of IEC technical committee 22: Power electronic systems and equipment. The text of this standard is based on the following documents: CDV Report on voting 22F/342/CDV 22F/354A/RVC Full information on the voting for the approval of this s
44、tandard can be found in the report on voting indicated in the above table. This publication has been drafted in accordance with the ISO/IEC Directives, Part 2. BS EN 62823:2015 6 IEC 62823:2015 IEC 2015 The committee has decided that the contents of this publication will remain unchanged until the s
45、tability date indicated on the IEC web site under “http:/webstore.iec.ch“ in the data related to the specific publication. At this date, the publication will be reconfirmed, withdrawn, replaced by a revised edition, or amended. IMPORTANT The colour inside logo on the cover page of this publication i
46、ndicates that it contains colours which are considered to be useful for the correct understanding of its contents. Users should therefore print this document using a colour printer. BS EN 62823:2015IEC 62823:2015 IEC 2015 7 THYRISTOR VALVES FOR THYRISTOR CONTROLLED SERIES CAPACITORS (TCSC) ELECTRICA
47、L TESTING 1 Scope This International Standard defines routine and type tests on thyristor valves used in thyristor controlled series capacitor (TCSC) installations for AC power transmission. The tests specified in this International Standard are based on air insulated valves operating in capacitive
48、boost mode or bypass mode. For other types of valve and for a valve operating in inductive boost mode, the test requirements and acceptance criteria are agreed between purchaser and supplier. 2 Normative references The following documents, in whole or in part, are normatively referenced in this docu
49、ment and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. IEC 60060-1:2010, High-voltage test techniques Part 1: General definitions and test requirements IEC 60071-1, Insulation co-ordination Part 1: Definitions, principles and rules IEC 60071-2, Insulation co-ordination Part 2: Application guide IEC 60270, High-vo
