1、BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery SafetyPart 2-11: Particular requirements for hand-held reciprocating saws (IEC 62841-2-11:2015)BS EN 62841-2-11:2016National for
2、ewordThis British Standard is the UK implementation of EN 62841-2-11:2016. It is derived from IEC 62841-2-11:2015. It supersedes BS EN 60745-2-11:2010, which is withdrawn.The CENELEC common modifications have been implemented at the appropriate places in the text. The start and finish of each common
3、 modification is indicated in the text by tags .The UK participation in its preparation was entrusted to Technical Committee CPL/116, Safety of motor-operated electric tools.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not pu
4、rport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2018 Published by BSI Standards Limited 2018ISBN 978 0 580 87831 2ICS 25.140.20; 25.140.30Compliance with a British Standard cannot confer immunity from l
5、egal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 March 2018.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 62841-2-11:2016EUROPEAN STANDARDNORME EUROPENNEEUROPISCHE NORMEN 62841-2-11A
6、pril 2016ICS 25.140.20; 25.140.30CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2016 CENELEC Ref. No. EN 62841-2-11:2016: EAll rights of exploitation in any form and by any means reserved worldwide for CENELEC Members.Electric motor-operated hand-held tools, transportable tools and
7、 lawn and garden machinery Safety Part 2-11: Particular requirements for hand-held reciprocating saws (IEC 62841-2-11:2015, modified)Outils lectroportatifs moteur, outils portables et machines pour jardins et pelouses Scurit Partie 2-11: Exigences particulires pour les scies alternatives portatives
8、(IEC 62841-2-11:2015, modifie)Elektrische motorbetriebene handgefhrte Werkzeuge, transportable Werkzeuge und Rasen und Gartenmaschinen Sicherheit Teil 2-11: Besondere Anforderungen fr handgefhrte hin und hergehende Sgen (IEC 62841-2-11:2015, modifiziert)This European Standard was approved by CENELEC
9、 on 2015-12-23. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards
10、may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member.This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and
11、notified to the CEN-CENELEC Management Centre has the same status as the official versions.CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, German
12、y, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United KingdomEnglish VersionEN 62841-2-11:2016 (E)European forewordThe text of document 116/246/FDIS,
13、 future edition 1 of IEC 62841-2-11, prepared by IEC/TC 116 “Safety of motor-operated electric tools“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 62841-2-11:2016.A draft amendment, which covers common modifications to IEC 62841-2-11, was prepared by CLC/TC 116 “Safet
14、y of motor-operated electric tools“ and approved by CENELEC.The following dates are fixed: latest date by which this document has to be implemented at national level by publication of an identical national standard or by endorsement(dop) 2016-12-23 latest date by which the national standards conflic
15、ting with this document have to be withdrawn(dow) 2019-12-23EN 62841-2-11:2016 supersedes EN 60745-2-11:2010.This European Standard is divided into four parts:Part 1: General requirements which are common to most hand-held electric motor operated tools (for the purpose of this standard referred to s
16、imply as tools) which could come within the scope of this standard;Part 2, 3 or 4: Requirements for particular types of tools which either supplement or modify the re-quirements given in Part 1 to account for the particular hazards and characteristics of these specific tools.This Part 2-11 is to be
17、used in conjunction with EN 62841-1:2015.This Part 2-11 supplements or modifies the corresponding clauses in EN 62841-1:2015, so as to convert it into the European Standard: Particular requirements for hand-held reciprocating saws (jig and sabre saws).Where a particular subclause of Part 1 is not me
18、ntioned in this Part 2-11, that subclause applies as far as relevant. Where this standard states “addition“, “modification“ or “replacement“, the relevant text in Part 1 is to be adapted accordingly.The following print types are used: requirements; in roman type test specifications: in italic type;
19、notes: in smaller roman type.The terms defined in Clause 3 are printed in bold typeface.Subclauses, notes, tables and figures which are additional to those in Part 1 are numbered starting from 101.Clauses, subclauses, notes, tables, figures and annexes which are additional to those in IEC 62841-2-11
20、:2015 are prefixed “Z”.This European Standard follows the overall requirements of EN ISO 12100.Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent
21、 rights.2BS EN 62841-2-11:2016EN 62841-2-11:2016 (E)This document has been prepared under a mandate given to CENELEC by the European Commission and the European Free Trade Association and supports essential requirements of EU Directive(s).For the relationship with EU Directive(s), see informative An
22、nex ZZ, which is an integral part of this document.Compliance with the clauses of Part 1 together with this Part 2-11 provides one means of conforming with the essential health and safety requirements of the Directive concerned.Endorsement noticeThe text of the International Standard IEC 62841-2-11:
23、2015 was approved by CENELEC as a European Standard with agreed common modifications.3BS EN 62841-2-11:2016EN 62841-2-11:2016 (E)Annex ZA (normative) Normative references to international publications with their corresponding European publicationsThe following documents, in whole or in part, are nor
24、matively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies.NOTE 1 When an International Publication has been modified by
25、 common modifications, indicated by (mod), the relevant EN/HD applies.NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu.This annex from Part 1 is applicable with the following addition:Publication Year Title EN/HD Ye
26、arISO 16893-1 2008 Wood-based panels Particleboard Part 1: Classifications 4BS EN 62841-2-11:2016EN 62841-2-11:2016 (E)Annex ZZ (informative) Relationship between this European standard and the essential requirements of Directive 2006/42/EC 2006 OJ L157 aimed to be coveredThis European standard has
27、been prepared under a Commissions standardisation request M/396 to provide one voluntary means of conforming to essential requirements of Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC.Once this standard is cited in the
28、 Official Journal of the European Union under that Directive, compliance with the normative clauses of this standard given in Table ZZ.1 confers, within the limits of the scope of this standard, a presumption of conformity with the corresponding essential requirements of that Directive, and associat
29、ed EFTA regulations.Table ZZ.1 Correspondence between this European Standard and Annex I of Directive 2006/42/ECEssential Requirements of Direc-tive 2006/42/ECClause(s) / sub-clause(s) of this ENRemarks / NotesAnnex I All clauses All corresponding requirements are covered by complying with all claus
30、es.WARNING 1: Presumption of conformity stays valid only as long as a reference to this European standard is maintained in the list published in the Official Journal of the European Union. Users of this standard should consult frequently the latest list published in the Official Journal of the Europ
31、ean Union.WARNING 2: Other Union legislation may be applicable to the product(s) falling within the scope of this standard.5BS EN 62841-2-11:2016FOREWORD . 81 Scope . 12 Normative references 13 Terms and definitions . 14 General requirements . 15 General conditions for the tests 15.17 Addition: . 16
32、 Radiation, toxicity and similar hazards 27 Classification 28 Marking and instructions 28.14.1 Addition: . 28.14.1.101 Safety instructions for reciprocating saws 28.14.2 b) Addition: . 28.14.2 c) Addition: . 29 Protection against access to live parts . 210 Starting . 211 Input and current 212 Heatin
33、g 213 Resistance to heat and fire . 314 Moisture resistance . 315 Resistance to rusting 316 Overload protection of transformers and associated circuits 317 Endurance 318 Abnormal operation . 318.8 Replacement of Table 4: . 319 Mechanical hazards . 319.1 Replacement of the first paragraph: 319.101 Sa
34、w blade barrier 320 Mechanical strength 421 Construction 421.18.1 Addition: . 422 Internal wiring 423 Components . 424 Supply connection and external flexible cords . 525 Terminals for external conductors 526 Provision for earthing . 527 Screws and connections 528 Creepage distances, clearances and
35、distances through insulation 5Annex I (normative) Measurement of noise and vibration emissions 9Annex K (normative) Battery tools and battery packs .18IEC 62841-2-11:20156 ISO 2018 All rights reservedContents PageBS EN 62841-2-11:2016Annex L (normative) Battery tools and battery packs provided with
36、mains connection or non-isolated sources .19Bibliography .20IEC 62841-2-11:2015 ISO/CIE 2018 All rights reserved 7BS EN 62841-2-11:2016EN 62841-2-11:2016 (E)FOREWORD1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrot
37、echnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specificati
38、ons, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International,
39、 governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decis
40、ions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for intern
41、ational use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In ord
42、er to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be cle
43、arly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification
44、bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, prop
45、erty damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in
46、this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any
47、 or all such patent rights. International Standard IEC 62841-2-11 has been prepared by IEC technical committee 116: Safety of motor-operated electric tools.The text of this standard is based on the following documents:FDIS Report on voting116/246/FDIS 116/256/RVDFull information on the voting for th
48、e approval of this standard can be found in the report on voting indicated in the above table.This publication has been drafted in accordance with the ISO/IEC Directives, Part 2.This Part 2-11 is to be used in conjunction with the first edition of IEC 62841-1 (2014).8BS EN 62841-2-11:2016EN 62841-2-
49、11:2016 (E)This Part 2-11 supplements or modifies the corresponding clauses in IEC 62841-1, so as to convert it into the IEC standard: Particular requirements for hand-held reciprocating saws.Where a particular subclause of Part 1 is not mentioned in this Part 2-11, that subclause applies as far as relevant. Where this standard states “addition”, “modification” or “replacement”, the relevant text in Part 1 is to be adapted accordingly.The following print types are used: requirements: in roman type; test specificati
