1、BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - SafetyPart 3-1: Particular requirements for transportable table sawsBS EN 62841-3-1:2014+A11:2017Incorporating corrigendum Nov
2、ember 2015EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM ICS 25.140.20 English Version Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-1: Particular requirements for transportable table saws (IEC 62841-3-1:2014, modified) Outils lectrop
3、ortatifs moteur, outils transportables et machines pour jardins et pelouses - Scurit - Partie 3-1: Exigences particulires pour les scies circulaires table transportables (CEI 62841-3-1:2014, modifie) Elektrische motorbetriebene handgefhrte Werkzeuge, transportable Werkzeuge und Rasen- und Gartenmasc
4、hinen - Sicherheit - Teil 3-1: Besondere Anforderungen fr transportable Tischkreissgen (IEC 62841-3-1:2014, modifiziert) This European Standard was approved by CENELEC on 2014-05-19. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for givi
5、ng this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three
6、official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electro
7、technical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Roman
8、ia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels
9、 2014 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 62841-3-1:2014 E EN 62841-3-1:2014/A11 December 2017 National forewordThis British Standard is the UK implementation of EN 62841-3-1:2014+A11:2017. It is derived from IEC 62841-3
10、-1:2014, incorporating corrigendum November 2015. It supersedes BS EN 62841-3-1:2014, which will be withdrawn on 19 October 2019.NOTE: The BS EN 62841 series supersedes the BS EN 60745 series, the BS EN 61029 series and parts of the BS EN 60335 series (for lawn and garden machinery). BS EN 62841-1:2
11、015 supersedes BS EN 60745-1:2009 and BS EN 61029-1:2009. A withdrawal date for BS EN 60745-1:2009 and BS EN 61029-1:2009 will be fixed upon publication of all standards in the BS EN 62841-2 and BS EN 62841-3 series.The CENELEC common modifications have been implemented at the appropriate places in
12、the text. The start and finish of each common modification is indicated in the text by tags .Where a common modification has been introduced by CENELEC amendment, the tags carry the number of the amendment. For example, the common modifications introduced by CENELEC amendment A11 are indicated by .T
13、he UK participation in its preparation was entrusted to Technical Committee CPL/116, Safety of motor-operated electric tools.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of
14、a contract. Users are responsible for its correct application. The British Standards Institution 2018 Published by BSI Standards Limited 2018ISBN 978 0 580 98111 1ICS 25.140.20Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under t
15、he authority of the Standards Policy and Strategy Committee on 30 September 2014.Amendments/corrigenda issued since publicationDate Text affected31 October 2015 Correction to supersession details in National foreword29 February 2016 Implementation of IEC corrigendum November 2015: Clause 23 updated3
16、0 June 2018 Implementation of CENELEC amendment A11:2017BRITISH STANDARDBS EN 62841-3-1:2014+A11:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM ICS 25.140.20 English Version Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery - Safety - Part 3-1: Particu
17、lar requirements for transportable table saws (IEC 62841-3-1:2014, modified) Outils lectroportatifs moteur, outils transportables et machines pour jardins et pelouses - Scurit - Partie 3-1: Exigences particulires pour les scies circulaires table transportables (CEI 62841-3-1:2014, modifie) Elektrisc
18、he motorbetriebene handgefhrte Werkzeuge, transportable Werkzeuge und Rasen- und Gartenmaschinen - Sicherheit - Teil 3-1: Besondere Anforderungen fr transportable Tischkreissgen (IEC 62841-3-1:2014, modifiziert) This European Standard was approved by CENELEC on 2014-05-19. CENELEC members are bound
19、to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-
20、CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Ce
21、ntre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, It
22、aly, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr
23、 Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2014 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 62841-3-1:2014 E EN 62841-3-1:2014/A11 December 2017 BS EN 62841-3-1:2014+A11:2017- 2 -
24、 European foreword The text of document 116/168/FDIS, future edition 1 of IEC 62841-3-1, prepared by IEC/TC 116 “Safety of motor-operated electric tools“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 62841-3-1:2014. A draft amendment, which covers common modifications
25、to IEC 62841-3-1:2014, was prepared by CLC/TC 116 “Safety of motor-operated electric tools“ and approved by CENELEC. The following dates are fixed: latest date by which this documenthas to be implemented at nationallevel by publication of an identicalnational standard or by endorsement(dop) 2015-05-
26、19 latest date by which the nationalstandards conflicting with thisdocument have to be withdrawn(dow) 2018-05-19 EN 62841-3-1:2014 supersedes EN 61029-2-1:2012. This document has been prepared under a mandate given to CENELEC by the European Commission and the European Free Trade Association, and su
27、pports essential requirements of EU Directive(s). For the relationship with EU Directive(s) see informative Annex ZZ, which is an integral part of this document. Subclauses, tables and figures which are additional to those in Part 1 are numbered starting from 101. This European Standard is divided i
28、nto four parts: Part 1: General requirements which are common to most electric motor operated tools (for the purpose of this standard referred to simply as tools) which could come within the scope of this standard; Part 2, 3 or 4: Requirements for particular types of tools which either supplement or
29、 modify the requirements given in Part 1 to account for the particular hazards and characteristics of these specific tools. This Part 3-1 is to be used in conjunction with EN 62841-1:201X 1). When this standard states “addition“, “modification“ or “replacement“, the relevant text in Part 1 is to be
30、adapted accordingly. Compliance with the clauses of Part 1 together with this Part 3-1 provides one means of conforming with the essential health and safety requirements of the Directive concerned. Warning: Other requirements and other EU Directives can be applicable to the products falling within t
31、he scope of this standard. This European Standard follows the overall requirements of EN ISO 12100. NOTE In this standard the following print types are used: - requirements proper; in roman type - test specifications: in italic type; - explanatory matter: in smaller roman type. Words in bold in the
32、text are defined in Clause 3. When a definition concerns an adjective, the adjective and the associated noun are also in bold. NOTE Clauses, subclauses, notes, tables, figures and annexes which are additional to those in IEC 62841-3-1:2014 are prefixed “Z”. 1)At draft stage.EN 62841-3-1:2014/A11:201
33、7 (E) Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. BS EN 62841-3-1:2014+A11:2017- 3 - EN 62841-3-1:2014/A11:2017 (E) Foreword to am
34、endment A11This document (EN 62841-3-1:2014/A11:2017) has been prepared by CLC/TC 116 “Safety of motor-operated electric tools“. The following dates are fixed: latest date by which this document has to be implementedat national level by publication of an identical nationalstandard or by endorsement(
35、dop) 2018-10-19 latest date by which the national standards conflicting withthis document have to be withdrawn(dow) 2019-10-19 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for id
36、entifying any or all such patent rights. This amendment was developed to delete the requirement for the declaration of vibration for transportable tools, since the vibration for transportable tools is not required to be measured. This document has been prepared under a mandate given to CENELEC by th
37、e European Commission and the European Free Trade Association, and supports essential requirements of EU Directive(s). In this European Standard the following print types are used: - requirements proper: in roman type; - test specifications: in italic type; - explanatory matter: in smaller roman typ
38、e. BS EN 62841-3-1:2014+A11:2017- 4 - Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated
39、references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE When an international publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Tit
40、le EN/HD Year ISO 180 - Plastics Determination of Izod impact strength EN ISO 180 - Annex ZZ (informative) Coverage of Essential Requirements of Directive 2006/42/EC This European Standard has been prepared under a mandate given to CENELEC by the European Commission and the European Free Trade Assoc
41、iation and within its scope the standard covers all relevant Essential Requirements as given in EU Directive 2006/42/EC (Machinery Directive). Compliance with this standard provides one means of conformity with the specified essential requirements of the Directives concerned. WARNING: Other requirem
42、ents and other EU Directives may be applicable to the products falling within the scope of this standard. EN 62841-3-1:2014/A11:2017 (E) BS EN 62841-3-1:2014+A11:2017- 4 - Annex ZA (normative) Normative references to international publications with their corresponding European publications The follo
43、wing documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE When an int
44、ernational publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. Publication Year Title EN/HD Year ISO 180 - Plastics Determination of Izod impact strength EN ISO 180 - Annex ZZ (informative) Coverage of Essential Requirements of Directive 2006/42/EC
45、This European Standard has been prepared under a mandate given to CENELEC by the European Commission and the European Free Trade Association and within its scope the standard covers all relevant Essential Requirements as given in EU Directive 2006/42/EC (Machinery Directive). Compliance with this st
46、andard provides one means of conformity with the specified essential requirements of the Directives concerned. WARNING: Other requirements and other EU Directives may be applicable to the products falling within the scope of this standard. EN 62841-3-1:2014/A11:2017 (E) 1 Scope . 12 Normative refere
47、nces 13 Terms and definitions . 14 General requirements . 55 General conditions for the tests 56 Radiation, toxicity and similar hazards 67 Classification 68 Marking and instructions 69 Protection against access to live parts . 1210 Starting . 1211 Input and current . 1212 Heating 1213 Resistance to
48、 heat and fire . 1214 Moisture resistance 1215 Resistance to rusting . 1316 Overload protection of transformers and associated circuits .1317 Endurance 1318 Abnormal operation 1319 Mechanical hazards 1319.101 Guarding above the table . 1419.102 Guarding below the table 1719.103 Riving knife 1719.104
49、 Saw blade guard and anti-kickback device system requirements .1819.105 Run-down time .2020 Mechanical strength 2021 Construction . 2221.101 Construction to facilitate cutting tool installations 2221.102 Push stick 2421.103 Saw blade alignment .2421.104 Table top . 2621.105 Rip fence and cross-cutting fence .2721.106 Kickback hazard reducing devices 2921.107 Table saw spindle and flanges . 3122 Internal wiring . 3123 Components 3124 Supply connection and external flexible cords.3225 Terminals for external conductors 3226
