1、Measurement techniques of piezoelectric, dielectric and electrostatic oscillatorsPart 1: Basic methods for the measurement (IEC 62884-1:2017)BS EN 62884-1:2017BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 62884-1
2、 September 2017 ICS 31.140 English Version Measurement techniques of piezoelectric, dielectric and electrostatic oscillators - Part 1: Basic methods for the measurement (IEC 62884-1:2017) Techniques de mesure des oscillateurs pizolectriques, dilectriques et lectrostatiques - Partie 1 : Mthodes fonda
3、mentales pour le mesurage (IEC 62884-1:2017) Messverfahren fr piezoelektrische, dielektrische und elektrostatische Oszillatoren - Teil 1: Grundlegende Messverfahren (IEC 62884-1:2017) This European Standard was approved by CENELEC on 2017-07-13. CENELEC members are bound to comply with the CEN/CENEL
4、EC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or
5、 to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
6、the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxe
7、mbourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische N
8、ormung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 62884-1:2017 E National forewordThis British Standard is the UK implementation of EN 62884-1:2017. It is id
9、entical to IEC 62884-1:2017.The UK participation in its preparation was entrusted to Technical Committee EPL/49, Piezoelectric devices for frequency control and selection.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purpo
10、rt to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2017 Published by BSI Standards Limited 2017ISBN 978 0 580 90554 4ICS 31.140Compliance with a British Standard cannot confer immunity from legal obligations.
11、This British Standard was published under the authority of the Standards Policy and Strategy Committee on 31 October 2017.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 628841:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 62884-1 September 2017 ICS 3
12、1.140 English Version Measurement techniques of piezoelectric, dielectric and electrostatic oscillators - Part 1: Basic methods for the measurement (IEC 62884-1:2017) Techniques de mesure des oscillateurs pizolectriques, dilectriques et lectrostatiques - Partie 1 : Mthodes fondamentales pour le mesu
13、rage (IEC 62884-1:2017) Messverfahren fr piezoelektrische, dielektrische und elektrostatische Oszillatoren - Teil 1: Grundlegende Messverfahren (IEC 62884-1:2017) This European Standard was approved by CENELEC on 2017-07-13. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulatio
14、ns which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC membe
15、r. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions
16、. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Ne
17、therlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Ma
18、nagement Centre: Avenue Marnix 17, B-1000 Brussels 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 62884-1:2017 E BS EN 628841:2017EN 62884-1:2017 2 European foreword The text of document 49/1187A/CDV, future edition 1 of IEC 6
19、2884-1, prepared by IEC/TC 49 “Piezoelectric, dielectric and electrostatic devices and associated materials for frequency control, selection and detection“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 62884-1:2017. The following dates are fixed: latest date by which t
20、he document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2018-04-13 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2020-07-13 Attention is drawn to the possibility that some of t
21、he elements of this document may be the subject of patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 62884-1:2017 was approved by CENELEC as a European Standard without any modification. I
22、n the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 60122-1:2002 NOTE Harmonized as EN 60122-1:2002 (not modified). IEC 60679-3:2012 NOTE Harmonized as EN 60679-3:2013 (not modified). IEC 60679-4 NOTE Harmonized as EN 60679-4. IEC 60679-5 N
23、OTE Harmonized as EN 60679-5. IEC 60749-26 NOTE Harmonized as EN 60749-26. IEC 60749-27 NOTE Harmonized as EN 60749-27. IEC 61000-4-2 NOTE Harmonized as EN 61000-4-2. IEC 61019-1:2004 NOTE Harmonized as EN 61019-1:2005 (not modified). IEC 61019-2:2005 NOTE Harmonized as EN 61019-2:2005 (not modified
24、). IEC 61837-1:2012 NOTE Harmonized as EN 61837-1:2012 (not modified). IEC 61837-2:2011 NOTE Harmonized as EN 61837-2:2011 (not modified). IEC 61837-4:2015 NOTE Harmonized as EN 61837-4:2015 (not modified). ISO 80000-4:2006 NOTE Harmonized as EN ISO 80000-4:2013 (not modified). BS EN 628841:2017EN 6
25、2884-1:2017 2 European foreword The text of document 49/1187A/CDV, future edition 1 of IEC 62884-1, prepared by IEC/TC 49 “Piezoelectric, dielectric and electrostatic devices and associated materials for frequency control, selection and detection“ was submitted to the IEC-CENELEC parallel vote and a
26、pproved by CENELEC as EN 62884-1:2017. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2018-04-13 latest date by which the national standards conflicting with the documen
27、t have to be withdrawn (dow) 2020-07-13 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard
28、 IEC 62884-1:2017 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 60122-1:2002 NOTE Harmonized as EN 60122-1:2002 (not modified). IEC 60679-3:2012 NOTE Harmonized
29、 as EN 60679-3:2013 (not modified). IEC 60679-4 NOTE Harmonized as EN 60679-4. IEC 60679-5 NOTE Harmonized as EN 60679-5. IEC 60749-26 NOTE Harmonized as EN 60749-26. IEC 60749-27 NOTE Harmonized as EN 60749-27. IEC 61000-4-2 NOTE Harmonized as EN 61000-4-2. IEC 61019-1:2004 NOTE Harmonized as EN 61
30、019-1:2005 (not modified). IEC 61019-2:2005 NOTE Harmonized as EN 61019-2:2005 (not modified). IEC 61837-1:2012 NOTE Harmonized as EN 61837-1:2012 (not modified). IEC 61837-2:2011 NOTE Harmonized as EN 61837-2:2011 (not modified). IEC 61837-4:2015 NOTE Harmonized as EN 61837-4:2015 (not modified). I
31、SO 80000-4:2006 NOTE Harmonized as EN ISO 80000-4:2013 (not modified). EN 62884-1:2017 3 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents are referred to in the text in such a way that some or all of their
32、content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indic
33、ated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 60027 series Letter symbols to be used in electrical technology EN 60027 series IEC
34、60050-561 - International electrotechnical vocabulary - Part 561: Piezoelectric, dielectric and electrostatic devices and associated materials for frequency control, selection and detection - - IEC 60068-1 2013 Environmental testing - Part 1: General and guidance EN 60068-1 2014 IEC 60068-2-1 - Envi
35、ronmental testing - Part 2-1: Tests - Test A: Cold EN 60068-2-1 - IEC 60068-2-2 - Environmental testing - Part 2-2: Tests - Test B: Dry heat EN 60068-2-2 - IEC 60068-2-6 - Environmental testing - Part 2-6: Tests - Test Fc: Vibration (sinusoidal) EN 60068-2-6 - IEC 60068-2-7 - Basic environmental tes
36、ting procedures - Part 2-7: Tests - Test Ga and guidance: Acceleration, steady state EN 60068-2-7 - IEC 60068-2-10 2005 Environmental testing - Part 2-10: Tests - Test J and guidance: Mould growth EN 60068-2-10 2005 IEC 60068-2-13 - Basic environmental testing procedures - Part 2-13: Tests - Test M:
37、 Low air pressure EN 60068-2-13 - IEC 60068-2-14 - Environmental testing - Part 2-14: Tests - Test N: Change of temperature EN 60068-2-14 - IEC 60068-2-17 1994 Basic environmental testing procedures - Part 2-17: Tests - Test Q: Sealing EN 60068-2-17 1994 BS EN 628841:2017EN 62884-1:2017 4 Publicatio
38、n Year Title EN/HD Year IEC 60068-2-20 - Environmental testing - Part 2-20: Tests - Test T: Test methods for solderability and resistance to soldering heat of devices with leads EN 60068-2-20 - IEC 60068-2-21 - Environmental testing - Part 2-21: Tests - Test U: Robustness of terminations and integra
39、l mounting devices EN 60068-2-21 - IEC 60068-2-27 - Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock EN 60068-2-27 - IEC 60068-2-30 - Environmental testing - Part 2-30: Tests - Test Db: Damp heat, cyclic (12 h + 12 h cycle) EN 60068-2-30 - IEC 60068-2-31 - Environmental testing
40、 - Part 2-31: Tests - Test Ec: Rough handling shocks, primarily for equipment-type specimens EN 60068-2-31 - IEC 60068-2-45 - Basic environmental testing procedures - Part 2-45: Tests - Test XA and guidance: Immersion in cleaning solvents EN 60068-2-45 - IEC 60068-2-52 - Environmental testing - Part
41、 2-52: Tests - Test Kb: Salt mist, cyclic (sodium chloride solution) EN 60068-2-52 - IEC 60068-2-58 - Environmental testing - Part 2-58: Tests - Test Td: Test methods for solderability, resistance to dissolution of metallization and to soldering heat of surface mounting devices (SMD) EN 60068-2-58 -
42、 IEC 60068-2-64 - Environmental testing - Part 2-64: Tests - Test Fh: Vibration, broadband random and guidance EN 60068-2-64 - IEC 60068-2-78 - Environmental testing - Part 2-78: Tests - Test Cab: Damp heat, steady state EN 60068-2-78 - IEC 60469 - Transitions, pulses and related waveforms - Terms,
43、definitions and algorithms EN 60469 - IEC 60617-DB - Graphical symbols for diagrams - - IEC 60679-1 2017 Piezoelectric, dielectric and electrostatic oscillators of assessed quality - Part 1 : Generic specification EN 60679-1 1)ISO 80000-1 - Quantities and units - Part 1: General EN ISO 80000-1 - 1)
44、To be published. 2 IEC 62884-1:2017 IEC 2017 CONTENTS FOREWORD . 6 1 Scope 8 2 Normative references 8 3 Terms and definitions 9 3.1 General . 9 3.2 Terms and definitions 10 4 Test and measurement procedures 10 4.1 General . 10 4.2 Test and measurement conditions . 10 4.2.1 Standard conditions for te
45、sting 10 4.2.2 Equilibrium conditions 10 4.2.3 Air flow conditions for temperature tests 10 4.2.4 Power supplies 11 4.2.5 Precision of measurement . 11 4.2.6 Precautions . 11 4.2.7 Alternative test methods 11 4.3 Visual inspection . 11 4.3.1 General . 11 4.3.2 Visual test A 11 4.3.3 Visual test B 11
46、 4.3.4 Visual test C 12 4.4 Dimensions and gauging procedures 12 4.4.1 Dimensions Test A 12 4.4.2 Dimensions Test B 12 4.5 Electrical test procedures 12 4.5.1 Insulation resistance 12 4.5.2 Voltage proof . 12 4.5.3 Input power . 13 4.5.4 Output frequency . 14 4.5.5 Frequency/temperature characterist
47、ics 15 4.5.6 Frequency/load coefficient . 16 4.5.7 Frequency/voltage coefficient 17 4.5.8 Frequency stability with thermal transient 17 4.5.9 Oscillation start-up. 18 4.5.10 Stabilization time . 22 4.5.11 Frequency adjustment range 22 4.5.12 Retrace characteristics 22 4.5.13 Oscillator output voltag
48、e (sinusoidal) . 23 4.5.14 Oscillator output voltage (pulse waveform) 24 4.5.15 Oscillator output waveform (sinusoidal) . 25 4.5.16 Oscillator output waveform (pulse) . 27 4.5.17 Oscillator output power (sinusoidal) . 27 4.5.18 Oscillator output impedance (sinusoidal) . 27 4.5.19 Re-entrant isolatio
49、n . 28 4.5.20 Output suppression of gated oscillators . 28 4.5.21 3-state output characteristics . 29 4.5.22 Amplitude modulation characteristics . 30 BS EN 628841:2017EN 62884-1:2017 4 Publication Year Title EN/HD Year IEC 60068-2-20 - Environmental testing - Part 2-20: Tests - Test T: Test methods for solderability and resistance to soldering heat of devices with leads EN 60068-2-20 - IEC 60068-2-21 - Environmental testing - Part 2-21: Tests - Test U: Robustness of terminations and integral
