1、Concentrator photovoltaic (CPV) modules Thermal cycling test to differentiate increased thermal fatigue durability BS EN 62925:2017 BSI Standards Publication WB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 62925 May 2017 ICS 27.160 Englis
2、h Version Concentrator photovoltaic (CPV) modules - Thermal cycling test to differentiate increased thermal fatigue durability (IEC 62925:2016) Modules photovoltaques concentration (CPV) - Essai de cycles thermiques pour la dtermination de la durabilit renforce la fatigue thermique (IEC 62925:2016)
3、CPV-Module - Temperaturwechselprfung fr CPV-Module zur Bewertung erhhter Temperaturwechselbestndigkeit (IEC 62925:2016) This European Standard was approved by CENELEC on 2017-01-18. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for givin
4、g this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three o
5、fficial versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrot
6、echnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romani
7、a, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 B
8、russels 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 62925:2017 E National foreword This British Standard is the UK implementation of EN 62925:2017. The UK participation in its preparation was entrusted to Technical Committe
9、e GEL/82, Photovoltaic Energy Systems. A list of organizations represented on this committee can be obtained on request to its secretary. This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards
10、Institution 2017 Published by BSI Standards Limited 2017 ISBN 978 0 580 88154 1 ICS 27.160 Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy Committee on 30 November 2017. Amen
11、dments/corrigenda issued since publication Date Text affected BRITISH STANDARD BS EN 62925:2017 EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 62925 May 2017 ICS 27.160 English Version Concentrator photovoltaic (CPV) modules - Thermal cycling test to differentiate increased thermal fatigue dur
12、ability (IEC 62925:2016) Modules photovoltaques concentration (CPV) - Essai de cycles thermiques pour la dtermination de la durabilit renforce la fatigue thermique (IEC 62925:2016) CPV-Module - Temperaturwechselprfung fr CPV-Module zur Bewertung erhhter Temperaturwechselbestndigkeit (IEC 62925:2016)
13、 This European Standard was approved by CENELEC on 2017-01-18. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical
14、 references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibilit
15、y of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Form
16、er Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electr
17、otechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Re
18、f. No. EN 62925:2017 E BS EN 62925:2017EN 62925:2017 2 European foreword The text of document 82/1185/FDIS, future edition 1 of IEC 62925, prepared by IEC/TC 82 “Solar photovoltaic energy systems“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 62925:2017. The following
19、dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2017-11-05 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2020-05-05 Attention is
20、drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 62925:2016 was approved by CENELEC as
21、 a European Standard without any modification. BS EN 62925:2017EN 62925:2017 2 European foreword The text of document 82/1185/FDIS, future edition 1 of IEC 62925, prepared by IEC/TC 82 “Solar photovoltaic energy systems“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 62
22、925:2017. The following dates are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2017-11-05 latest date by which the national standards conflicting with the document have to be withdrawn (dow)
23、2020-05-05 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 62925:2016 wa
24、s approved by CENELEC as a European Standard without any modification. EN 62925:2017 3 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents, in whole or in part, are normatively referenced in this document and
25、are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When an International Publication has been modified by common modifications, indicated by (mod
26、), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 62108 2016 Concentrator photovoltaic (CPV) modules and assemblies - Design qualification and typ
27、e approval EN 62108 2016 BS EN 62925:2017This page deliberately left blank 2 IEC 62925:2016 IEC 2016 CONTENTS FOREWORD . 3 INTRODUCTION . 5 1 Scope 6 2 Normative references 6 3 Terms and definitions 6 4 Sampling . 7 5 Marking . 7 6 Testing 8 7 Rating 8 8 Report . 8 9 Modifications . 9 10 Test proced
28、ure 9 10.1 General . 9 10.2 Cell evaluation 9 10.2.1 Purpose . 9 10.2.2 Procedure 10 10.2.3 Requirements 10 10.3 Thermal cycling. 10 10.3.1 Purpose . 10 10.3.2 Test sample . 10 10.3.3 Procedure 10 10.4 Outdoor exposure test 12 10.4.1 Purpose . 12 10.4.2 Procedure 12 Bibliography 13 Figure 1 Number o
29、f required cycles as a function of average temperature ramp rate in order to complete an equivalent test . 11 Figure 2 Overall test time as a function of temperature ramp rate 12 2 IEC 62925:2016 IEC 2016 CONTENTS FOREWORD . 3 INTRODUCTION . 5 1 Scope 6 2 Normative references 6 3 Terms and definitio
30、ns 6 4 Sampling . 7 5 Marking . 7 6 Testing 8 7 Rating 8 8 Report . 8 9 Modifications . 9 10 Test procedure 9 10.1 General . 9 10.2 Cell evaluation 9 10.2.1 Purpose . 9 10.2.2 Procedure 10 10.2.3 Requirements 10 10.3 Thermal cycling. 10 10.3.1 Purpose . 10 10.3.2 Test sample . 10 10.3.3 Procedure 10
31、 10.4 Outdoor exposure test 12 10.4.1 Purpose . 12 10.4.2 Procedure 12 Bibliography 13 Figure 1 Number of required cycles as a function of average temperature ramp rate in order to complete an equivalent test . 11 Figure 2 Overall test time as a function of temperature ramp rate 12 BS EN 62925:2017I
32、EC 62925:2016 IEC 2016 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ CONCENTRATOR PHOTOVOLTAIC (CPV) MODULES THERMAL CYCLING TEST TO DIFFERENTIATE INCREASED THERMAL FATIGUE DURABILITY FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comp
33、rising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Stan
34、dards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this prep
35、aratory work. International, governmental and non- governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organ
36、izations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form
37、of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretati
38、on by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regi
39、onal publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out
40、by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees
41、for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the N
42、ormative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held re
43、sponsible for identifying any or all such patent rights. International Standard IEC 62925 has been prepared by IEC technical committee 82: Solar photovoltaic energy systems. The text of this standard is based on the following documents: FDIS Report on voting 82/1185/FDIS 82/1210/RVD Full information
44、 on the voting for the approval of this International Standard can be found in the report on voting indicated in the above table. This document has been drafted in accordance with the ISO/IEC Directives, Part 2. BS EN 62925:2017IEC 62925:2016 IEC 2016 3 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ CO
45、NCENTRATOR PHOTOVOLTAIC (CPV) MODULES THERMAL CYCLING TEST TO DIFFERENTIATE INCREASED THERMAL FATIGUE DURABILITY FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committee
46、s). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available
47、Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non- governmental organiz
48、ations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical mat
49、ters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in wh
