1、BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06Event video data recorder for road vehcle accidentsPart 1: Basic requirements (IEC 63005-1:2017)BS EN 63005-1:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 63005-1 November 2017 ICS 33.160.40; 43.040.15 Engli
2、sh Version Event video data recorder for road vehicle accidents - Part 1: Basic requirements (IEC 63005-1:2017) Enregistreurs de donnes vido pour lidentification et lanalyse des causes des accidents des vhicules routiers - Partie 1: Exigences de bases (IEC 63005-1:2017) Ereignis Video Daten Recorder
3、 fr Unflle von Straenfahrzeugen - Teil 1: Generelle Anforderungen (IEC 63005-1:2017) This European Standard was approved by CENELEC on 2017-09-13. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status
4、 of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French,
5、German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Bel
6、gium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spai
7、n, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CENELEC All rights of
8、exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN 63005-1:2017 E National forewordThis British Standard is the UK implementation of EN 630051:2017. It is identical to IEC 630051:2017.The UK participation in its preparation was entrusted to Technical Commit
9、tee EPL/100, Audio, video and multimedia systems and equipment.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application.
10、 The British Standards Institution 2017 Published by BSI Standards Limited 2017ISBN 978 0 580 95480 1ICS 43.040.15; 33.160.40Compliance with a British Standard cannot confer immunity from legal obligations.This British Standard was published under the authority of the Standards Policy and Strategy C
11、ommittee on 30 November 2017.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN 630051:2017EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN 63005-1 November 2017 ICS 33.160.40; 43.040.15 English Version Event video data recorder for road vehicle accidents - Par
12、t 1: Basic requirements (IEC 63005-1:2017) Enregistreurs de donnes vido pour lidentification et lanalyse des causes des accidents des vhicules routiers - Partie 1: Exigences de bases (IEC 63005-1:2017) Ereignis Video Daten Recorder fr Unflle von Straenfahrzeugen - Teil 1: Generelle Anforderungen (IE
13、C 63005-1:2017) This European Standard was approved by CENELEC on 2017-09-13. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and
14、bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under th
15、e responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia
16、, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Commi
17、ttee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Avenue Marnix 17, B-1000 Brussels 2017 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENE
18、LEC Members. Ref. No. EN 63005-1:2017 E BS EN 630051:2017EN 63005-1:2017 (E) 2 European foreword The text of document 100/2839/CDV, future edition 1 of IEC 63005-1, prepared by Technical Area 17 “Multimedia systems and equipment for cars“ of IEC/TC 100 “Audio, video and multimedia systems and equipm
19、ent“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN 63005-1:2017. The following dates are fixed: latest date by which this document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2018-06-13 latest date by
20、 which the national standards conflicting with this document have to be withdrawn (dow) 2020-09-13 Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights
21、. Endorsement notice The text of the International Standard IEC 63005-1:2017 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following note has to be added for the standard indicated: IEC 62133 NOTE Harmonized as EN 62133. BS EN
22、 630051:2017EN 63005-1:2017 (E) 3 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents are referred to in the text in such a way that some or all of their content constitutes requirements of this document. For
23、dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 Where an International Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-t
24、o-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 60068-2-1 2007 Environmental testing - Part 2-1: Tests - Test A: Cold EN 60068-2-1 2007 IEC 60068-2-6 - Environmental testing - Part 2-6:
25、Tests - Test Fc: Vibration (sinusoidal) EN 60068-2-6 - IEC 60068-2-27 2008 Environmental testing - Part 2-27: Tests - Test Ea and guidance: Shock EN 60068-2-27 2009 ISO 12233 - Photography - Electronic still picture imaging - Resolution and spatial frequency responses - - BS EN 630051:2017This page
26、deliberately left blank 2 IEC 63005-1:2017 IEC 2017 CONTENTS FOREWORD . 4 INTRODUCTION . 6 1 Scope 7 2 Normative references 7 3 Terms and definitions 7 4 Abbreviated terms and symbols . 8 5 Types of EVDR 9 5.1 Classification by security level 9 5.2 Classification by interoperability of functions . 9
27、 6 Functional requirements 10 6.1 Basic functions of the EVDR for road vehicle accidents 10 6.2 Types of event data 10 6.2.1 General . 10 6.2.2 Mandatory event data 11 6.2.3 Optional event data . 12 6.3 Power supply unit and electrical safety . 13 6.3.1 Main power 13 6.3.2 Fuse 13 6.3.3 Protection f
28、rom power failure . 13 7 General requirements 13 7.1 Performance for storing acceleration . 13 7.2 Physical structure . 13 7.2.1 General . 13 7.2.2 Input interface . 14 7.3 Video camera performance . 14 7.3.1 Basic camera performance 14 7.3.2 Camera FOV . 14 7.3.3 Vehicle registration plate detectio
29、n performance 14 7.4 Data storage and security . 14 7.5 Environmental reliability tests . 14 7.5.1 General . 14 7.5.2 Low-temperature operation test . 14 7.5.3 Operation at high-temperature . 14 7.5.4 High temperature storage test 15 7.5.5 Vibration test . 15 7.5.6 Mechanical shock test . 15 Annex A
30、 (informative) Test setup for horizontal and vertical FOV . 16 Annex B (informative) Assignment of product identification number . 17 Annex C (normative) Registration plate identification of the camera . 18 Bibliography 19 Figure 1 Standard coordinate system of a vehicle equipped with the EVDR (body
31、 fixed coordinates) . 9 Figure 2 Basic functions of the EVDR for road vehicle accidents 10 Figure A.1 Test setup for horizontal and vertical FOV (front view) 16 2 IEC 63005-1:2017 IEC 2017 CONTENTS FOREWORD . 4 INTRODUCTION . 6 1 Scope 7 2 Normative references 7 3 Terms and definitions 7 4 Abbreviat
32、ed terms and symbols . 8 5 Types of EVDR 9 5.1 Classification by security level 9 5.2 Classification by interoperability of functions . 9 6 Functional requirements 10 6.1 Basic functions of the EVDR for road vehicle accidents 10 6.2 Types of event data 10 6.2.1 General . 10 6.2.2 Mandatory event dat
33、a 11 6.2.3 Optional event data . 12 6.3 Power supply unit and electrical safety . 13 6.3.1 Main power 13 6.3.2 Fuse 13 6.3.3 Protection from power failure . 13 7 General requirements 13 7.1 Performance for storing acceleration . 13 7.2 Physical structure . 13 7.2.1 General . 13 7.2.2 Input interface
34、 . 14 7.3 Video camera performance . 14 7.3.1 Basic camera performance 14 7.3.2 Camera FOV . 14 7.3.3 Vehicle registration plate detection performance 14 7.4 Data storage and security . 14 7.5 Environmental reliability tests . 14 7.5.1 General . 14 7.5.2 Low-temperature operation test . 14 7.5.3 Ope
35、ration at high-temperature . 14 7.5.4 High temperature storage test 15 7.5.5 Vibration test . 15 7.5.6 Mechanical shock test . 15 Annex A (informative) Test setup for horizontal and vertical FOV . 16 Annex B (informative) Assignment of product identification number . 17 Annex C (normative) Registrat
36、ion plate identification of the camera . 18 Bibliography 19 Figure 1 Standard coordinate system of a vehicle equipped with the EVDR (body fixed coordinates) . 9 Figure 2 Basic functions of the EVDR for road vehicle accidents 10 Figure A.1 Test setup for horizontal and vertical FOV (front view) 16 BS
37、 EN 630051:2017IEC 63005-1:2017 IEC 2017 3 Figure A.2 Test setup for horizontal and vertical FOV (plan view) 16 Figure C.1 License plate identification test using the ISO 12233 resolution chart . 18 Figure C.2 ISO 12233 resolution chart . 18 Table 1 Types of event data . 11 Table 2 Mandatory event d
38、ata items 11 Table 3 Optional event data items 12 Table 4 Operating voltage of EVDR under test . 13 Table 5 Vibration condition 15 Table 6 Shock condition . 15 Table B.1 Assignment of product identification number 17 BS EN 630051:2017 4 IEC 63005-1:2017 IEC 2017 INTERNATIONAL ELECTROTECHNICAL COMMIS
39、SION _ EVENT VIDEO DATA RECORDER FOR ROAD VEHICLE ACCIDENTS Part 1: Basic requirements FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is t
40、o promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and G
41、uides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IE
42、C also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as
43、possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense
44、. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees under
45、take to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any atte
46、station of conformity. Independent certification bodies provide conformity assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition
47、of this publication. 7) No liability shall attach to IEC or its directors, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct
48、or indirect, or for costs (including legal fees) and expenses arising out of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable
49、 for the correct application of this publication. 9) Attention is drawn to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 63005-1 has been prepared by technical area 17: Multimedia systems and equipment for cars, of IEC technical committee 100: Audio, video and multimedia systems and equipment. The text of this
