1、BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06Environmental testingPart 2-5: Tests - Test S: Simulated solar radiation at ground level and guidance for solar radiation testing and weathering (IEC 60068-2-5:2018)BS EN IEC 60068-2-5:2018EUROPEAN STANDARD NORME EUROPE
2、NNE EUROPISCHE NORM EN IEC 60068-2-5 May 2018 ICS 19.040 Supersedes EN 60068-2-5:2011 English Version Environmental testing - Part 2-5: Tests - Test S: Simulated solar radiation at ground level and guidance for solar radiation testing and weathering (IEC 60068-2-5:2018) Essais denvironnement - Parti
3、e 2-5: Essais - Essai S: Rayonnement solaire simul au niveau du sol et recommandations pour les essais de rayonnement solaire et le vieillissement (IEC 60068-2-5:2018) Umgebungseinflsse - Teil 2-5: Prfverfahren - Prfung S: Nachgebildete Sonnenbestrahlung in Bodennhe und Leitfaden zur Sonnenstrahlung
4、 und Bewitterung (IEC 60068-2-5:2018) This European Standard was approved by CENELEC on 2018-05-11. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration.
5、 Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made b
6、y translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Repu
7、blic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United K
8、ingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels 2018 CENELEC All rights of exploitation in any form and by any means r
9、eserved worldwide for CENELEC Members. Ref. No. EN IEC 60068-2-5:2018 E National forewordThis British Standard is the UK implementation of EN IEC 6006825:2018. It is identical to IEC 6006825:2018. It supersedes BS EN 6006825:2011, which will be withdrawn on 11 May 2021.The UK participation in its pr
10、eparation was entrusted to Technical Committee GEL/104, Environmental conditions, classification and testing.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. User
11、s are responsible for its correct application. The British Standards Institution 2018 Published by BSI Standards Limited 2018ISBN 978 0 580 91890 2ICS 19.040Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of th
12、e Standards Policy and Strategy Committee on 31 May 2018.Amendments/corrigenda issued since publicationDate Text affectedBRITISH STANDARDBS EN IEC 6006825:2018EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN IEC 60068-2-5 May 2018 ICS 19.040 Supersedes EN 60068-2-5:2011 English Version Environme
13、ntal testing - Part 2-5: Tests - Test S: Simulated solar radiation at ground level and guidance for solar radiation testing and weathering (IEC 60068-2-5:2018) Essais denvironnement - Partie 2-5: Essais - Essai S: Rayonnement solaire simul au niveau du sol et recommandations pour les essais de rayon
14、nement solaire et le vieillissement (IEC 60068-2-5:2018) Umgebungseinflsse - Teil 2-5: Prfverfahren - Prfung S: Nachgebildete Sonnenbestrahlung in Bodennhe und Leitfaden zur Sonnenstrahlung und Bewitterung (IEC 60068-2-5:2018) This European Standard was approved by CENELEC on 2018-05-11. CENELEC mem
15、bers are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on applicat
16、ion to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELE
17、C Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Icela
18、nd, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique
19、 Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN IEC 60068-2-5:2018 E BS EN IEC 6006825:2018EN IEC 60068-2-5:
20、2018 (E) 2 European foreword The text of document 104/735/CDV, future edition 3 of IEC 60068-2-5, prepared by IEC/TC 104 “Environmental conditions, classification and methods of test“ was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN IEC 60068-2-5:2018. The following dates
21、 are fixed: latest date by which the document has to be implemented at national level by publication of an identical national standard or by endorsement (dop) 2019-02-11 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2021-05-11 This document supe
22、rsedes EN 60068-2-5:2011. Attention is drawn to the possibility that some of the elements of this document may be the subject of patent rights. CENELEC shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 60068-2-5
23、:2018 was approved by CENELEC as a European Standard without any modification. In the official version, for Bibliography, the following notes have to be added for the standards indicated: IEC 60068-2-78 NOTE Harmonized as EN 60068-2-78. ISO 4892-1 NOTE Harmonized as EN ISO 4892-1. ISO 4892-2 NOTE Ha
24、rmonized as EN ISO 4892-2. ISO 4892-3 NOTE Harmonized as EN ISO 4892-3. BS EN IEC 6006825:2018EN IEC 60068-2-5:2018 (E) 3 Annex ZA (normative) Normative references to international publications with their corresponding European publications The following documents are referred to in the text in such
25、 a way that some or all of their content constitutes requirements of this document. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 Where an International Publication has been modif
26、ied by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 60068-1 - Environmental testing - Part 1: General
27、and guidance EN 60068-1 - IEC 60068-2-1 - Environmental testing - Part 2-1: Tests - Test A: Cold EN 60068-2-1 - IEC 60068-2-2 - Environmental testing - Part 2-2: Tests - Test B: Dry heat EN 60068-2-2 - BS EN IEC 6006825:2018 2 IEC 60068-2-5:2018 IEC 2018 CONTENTS FOREWORD . 4 INTRODUCTION . 6 1 Scop
28、e 7 2 Normative references 7 3 Terms and definitions 7 4 General remarks 8 4.1 Overview. 8 4.2 Irradiance of solar radiation 8 4.3 Spectral irradiance of solar radiation . 8 4.4 Radiation source . 9 5 Test method Sa: thermal effect test . 9 5.1 Conditioning 9 5.1.1 General . 9 5.1.2 Temperature 9 5.
29、1.3 Humidity 9 5.1.4 Ozone and other contamination gases . 9 5.1.5 Surface contamination . 10 5.1.6 Mounting of test specimen(s) . 10 5.1.7 Test facility 10 5.1.8 Test apparatus 10 5.2 Initial measurements . 11 5.3 Testing . 11 5.3.1 General . 11 5.3.2 Procedure Sa 1 24 h cycle, 8 h irradiation and
30、16 h darkness, repeated as required . 11 5.3.3 Procedure Sa 2 24 h cycle, 20 h irradiation and 4 h darkness, repeated as required . 11 5.3.4 Procedure Sa 3 Continuous irradiation as required . 11 5.4 Final measurements 13 6 Test method Sb: Weathering test with or without wetting . 13 6.1 Test appara
31、tus 13 6.1.1 Laboratory radiation source . 13 6.1.2 Test chamber. 14 6.1.3 Temperature 14 6.1.4 Humidity 15 6.1.5 Spray cycle 15 6.1.6 Mounting of test specimen(s) . 15 6.1.7 Ozone and other contaminating gases . 15 6.1.8 Surface contamination . 15 6.2 Initial measurements . 15 6.3 Testing . 15 6.3.
32、1 General . 15 6.3.2 Test duration . 16 6.3.3 Test procedure 16 6.3.4 Ancillary environmental conditions . 16 6.4 Final measurements 16 BS EN IEC 6006825:2018IEC 60068-2-5:2018 IEC 2018 3 7 Information to be given in the relevant specification . 17 8 Information to be given in the test report 17 Ann
33、ex A (informative) Standard solar spectral irradiance 18 Annex B (informative) Radiation source 20 B.1 General . 20 B.2 Filters . 20 B.3 Uniformity of irradiance . 20 Annex C (informative) Typical apparatus for weathering . 21 Annex D (informative) Instrumentation 23 D.1 General . 23 D.2 Measurement
34、 of irradiance 23 D.3 Measurement of spectral irradiance 23 D.4 Measurement of temperature 23 D.5 Difference between insulated black panel and uninsulated black panel thermometer . 23 Bibliography 24 Figure 1 Global solar spectral irradiance at sea level . 8 Figure 2 Test procedures Sa 1, Sa 2 and S
35、a 3 . 13 Figure C.1 Example of test apparatus 21 Figure C.2 Example of test apparatus with flat array 22 Table 1 Spectral irradiance 9 Table 2 Minimum and maximum levels of the relative spectral irradiance . 10 Table 3 Relative spectral irradiance of xenon-arc lamp(s) with daylight filters 14 Table
36、4 Relative spectral irradiance for xenon-arc lamp(s) with window glass filters 14 Table 5 Exposure cycles 16 Table A.1 Comparison of basic atmospheric conditions used for the solar spectrum defined in ASTM G 177 and that defined in CIE 85:1989, Table 4 . 19 Table A.2 Irradiance comparison for the AS
37、TM G 177 solar spectrum and the CIE 85:1989, Table 4, solar spectrum . 19 BS EN IEC 6006825:2018 4 IEC 60068-2-5:2018 IEC 2018 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ ENVIRONMENTAL TESTING Part 2-5: Tests Test S: Simulated solar radiation at ground level and guidance for solar radiation testing
38、and weathering FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC National Committees). The object of IEC is to promote international co-operation on all questions concerning standar
39、dization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Publicly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation
40、 is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-governmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with th
41、e International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC on technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects
42、 since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepted by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical con
43、tent of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possi
44、ble in their national and regional publications. Any divergence between any IEC Publication and the corresponding national or regional publication shall be clearly indicated in the latter. 5) IEC itself does not provide any attestation of conformity. Independent certification bodies provide conformi
45、ty assessment services and, in some areas, access to IEC marks of conformity. IEC is not responsible for any services carried out by independent certification bodies. 6) All users should ensure that they have the latest edition of this publication. 7) No liability shall attach to IEC or its director
46、s, employees, servants or agents including individual experts and members of its technical committees and IEC National Committees for any personal injury, property damage or other damage of any nature whatsoever, whether direct or indirect, or for costs (including legal fees) and expenses arising ou
47、t of the publication, use of, or reliance upon, this IEC Publication or any other IEC Publications. 8) Attention is drawn to the Normative references cited in this publication. Use of the referenced publications is indispensable for the correct application of this publication. 9) Attention is drawn
48、to the possibility that some of the elements of this IEC Publication may be the subject of patent rights. IEC shall not be held responsible for identifying any or all such patent rights. International Standard IEC 60068-2-5 has been prepared by IEC technical committee 104: Environmental conditions,
49、classification and methods of test. This third edition cancels and replaces the second edition of published in 2010. This edition constitutes a technical revision. This edition includes the following significant technical changes with respect to the previous edition: a) the title of this document has been modified; b) the current thermal effect test method, specified as “Test method Sa“ has been retained and the weathering test method specified as “Test method Sb“
