1、BSI Standards PublicationWB11885_BSI_StandardCovs_2013_AW.indd 1 15/05/2013 15:06Heat shrinkable low and medium voltage moulded shapesPart 2: Methods of test (IEC 62677-2:2017)BS EN IEC 62677-2:2018EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN IEC 62677-2 February 2018 ICS 29.035.01; 29.035.2
2、0 English Version Heat shrinkable low and medium voltage moulded shapes - Part 2 Methods of test (IEC 62677-2:2017) Profils thermortractables basse et moyenne tensions - Partie 2: Mthodes dessai (IEC 62677-2:2017) Wrmeschrumpfende Nieder- und Mittelspannungsformteile - Teil 2: Prfverfahren (IEC 6267
3、7-2:2017) This European Standard was approved by CENELEC on 2017-11-15. CENELEC members are bound to comply with the CEN/CENELEC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and biblio
4、graphical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the resp
5、onsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finl
6、and, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxembourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee f
7、or Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische Normung CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELE
8、C Members. Ref. No. EN IEC 62677-2:2018 E National forewordThis British Standard is the UK implementation of EN IEC 626772:2018. It is identical to IEC 626772:2017.The UK participation in its preparation was entrusted to Technical Committee GEL/15/5, Flexible insulating sleeving for electrical purpo
9、ses.A list of organizations represented on this committee can be obtained on request to its secretary.This publication does not purport to include all the necessary provisions of a contract. Users are responsible for its correct application. The British Standards Institution 2018 Published by BSI St
10、andards Limited 2018ISBN 978 0 580 79821 4ICS 29.035.20; 29.035.01Compliance with a British Standard cannot confer immunity from legal obligations. This British Standard was published under the authority of the Standards Policy and Strategy Committee on 28 February 2018.Amendments/corrigenda issued
11、since publicationDate Text affectedBRITISH STANDARDBS EN IEC 626772:2018EUROPEAN STANDARD NORME EUROPENNE EUROPISCHE NORM EN IEC 62677-2 February 2018 ICS 29.035.01; 29.035.20 English Version Heat shrinkable low and medium voltage moulded shapes - Part 2 Methods of test (IEC 62677-2:2017) Profils th
12、ermortractables basse et moyenne tensions - Partie 2: Mthodes dessai (IEC 62677-2:2017) Wrmeschrumpfende Nieder- und Mittelspannungsformteile - Teil 2: Prfverfahren (IEC 62677-2:2017) This European Standard was approved by CENELEC on 2017-11-15. CENELEC members are bound to comply with the CEN/CENEL
13、EC Internal Regulations which stipulate the conditions for giving this European Standard the status of a national standard without any alteration. Up-to-date lists and bibliographical references concerning such national standards may be obtained on application to the CEN-CENELEC Management Centre or
14、 to any CENELEC member. This European Standard exists in three official versions (English, French, German). A version in any other language made by translation under the responsibility of a CENELEC member into its own language and notified to the CEN-CENELEC Management Centre has the same status as
15、the official versions. CENELEC members are the national electrotechnical committees of Austria, Belgium, Bulgaria, Croatia, Cyprus, the Czech Republic, Denmark, Estonia, Finland, Former Yugoslav Republic of Macedonia, France, Germany, Greece, Hungary, Iceland, Ireland, Italy, Latvia, Lithuania, Luxe
16、mbourg, Malta, the Netherlands, Norway, Poland, Portugal, Romania, Serbia, Slovakia, Slovenia, Spain, Sweden, Switzerland, Turkey and the United Kingdom. European Committee for Electrotechnical Standardization Comit Europen de Normalisation Electrotechnique Europisches Komitee fr Elektrotechnische N
17、ormung CEN-CENELEC Management Centre: Rue de la Science 23, B-1040 Brussels 2018 CENELEC All rights of exploitation in any form and by any means reserved worldwide for CENELEC Members. Ref. No. EN IEC 62677-2:2018 E BS EN IEC 626772:2018EN IEC 62677-2:2018 (E) 2 European foreword The text of documen
18、t 15/807/FDIS, future edition 1 of IEC 62677-2, prepared by IEC/TC 15 “Solid electrical insulating materials“, was submitted to the IEC-CENELEC parallel vote and approved by CENELEC as EN IEC 62677-2:2018. The following dates are fixed: latest date by which the document has to be implemented at nati
19、onal level by publication of an identical national standard or by endorsement (dop) 2018-08-15 latest date by which the national standards conflicting with the document have to be withdrawn (dow) 2020-11-15 Attention is drawn to the possibility that some of the elements of this document may be the s
20、ubject of patent rights. CENELEC and/or CEN shall not be held responsible for identifying any or all such patent rights. Endorsement notice The text of the International Standard IEC 62677-2:2017 was approved by CENELEC as a European Standard without any modification. In the official version, for Bi
21、bliography, the following note has to be added for the standard indicated : IEC 62677-1 NOTE Harmonized as EN IEC 62677-1. BS EN IEC 626772:2018EN IEC 62677-2:2018 (E) 3 Annex ZA (normative) Normative references to international publications with their corresponding European publications The followi
22、ng documents, in whole or in part, are normatively referenced in this document and are indispensable for its application. For dated references, only the edition cited applies. For undated references, the latest edition of the referenced document (including any amendments) applies. NOTE 1 When an Int
23、ernational Publication has been modified by common modifications, indicated by (mod), the relevant EN/HD applies. NOTE 2 Up-to-date information on the latest versions of the European Standards listed in this annex is available here: www.cenelec.eu. Publication Year Title EN/HD Year IEC 60212 2010 St
24、andard conditions for use prior to and during the testing of solid electrical insulating materials EN 60212 2011 IEC 60216-4-1 2006 Electrical insulating materials - Thermal endurance properties - Part 4-1: Ageing ovens - Single-chamber ovens EN 60216-4-1 2006 IEC 60216-4-2 2000 Electrical insulatin
25、g materials - Thermal endurance properties - Part 4-2: Ageing ovens - Precision ovens for use up to 300 C EN 60216-4-2 2000 IEC 60243-1 2013 Electric strength of insulating materials - Test methods - Part 1: Tests at power frequencies EN 60243-1 2013 IEC 60250 1969 Recommended methods for the determ
26、ination of the permittivity and dielectric dissipation factor of electrical insulating materials at power, audio and radio frequencies including metre wavelengths - - IEC 60587 2007 Electrical insulating materials used under severe ambient conditions - Test methods for evaluating resistance to track
27、ing and erosion EN 60587 2007 IEC 60695-11-2 2013 Fire hazard testing - Part 11-2: Test flames - 1 kW nominal premixed flame: Apparatus, confirmatory test arrangement and guidance EN 60695-11-2 2014 IEC 60695-11-10 2013 Fire hazard testing - Part 11-10: Test flames - 50 W horizontal and vertical fla
28、me test methods EN 60695-11-10 2013 IEC 62631-3-1 2016 Dielectric and resistive properties of solid insulating materials - Part 3-1 Determination of resistive properties (DC methods) - Volume resistance and volume resistivity, general method EN 62631-3-1 2016 IEC 62677-3 series Heat-shrinkable low a
29、nd medium voltage moulded shapes - Part 3: Specification for individual materials - series ISO 62 2008 Plastics - Determination of water absorption EN ISO 62 2008 BS EN IEC 626772:2018EN IEC 62677-2:2018 (E) 4 ISO 846 1997 Plastics - Evaluation of the action of microorganisms EN ISO 846 1997 ISO 489
30、2-3 2016 Plastics - Methods of exposure to laboratory light sources - Part 3: Fluorescent UV lamps EN ISO 4892-3 2016 ISO 11357-3 2011 Plastics - Differential scanning calorimetry (DSC) - Part 3: Determination of temperature and enthalpy of melting and crystallization EN ISO 11357-3 2013 ISO 11358-1
31、 2014 Plastics - Thermogravimetry (TG) of polymers - Part 1: General principles EN ISO 11358-1 2014 BS EN IEC 626772:2018 2 IEC 62677-2:2017 IEC 2017 CONTENTS FOREWORD . 5 INTRODUCTION . 7 1 Scope 8 2 Normative references 8 3 Terms and definitions 9 4 Test conditions 9 5 Standard test specimens . 9
32、6 Dimensions 9 6.1 Number of test specimens . 9 6.2 Procedure . 9 6.3 Result . 10 7 Heat shock 10 7.1 Number of test specimens . 10 7.2 Form of test specimens . 10 7.3 Procedure . 10 7.4 Report. 10 7.5 Result . 10 8 Bending at low temperature . 10 8.1 Number and form of test specimens 10 8.2 Procedu
33、re . 10 8.3 Result . 10 9 Dimensional stability on storage 10 9.1 Number of test specimens . 10 9.2 Procedure . 11 9.3 Result . 11 10 Tensile strength and elongation at break . 11 10.1 Number and form of test specimens 11 10.2 Conditioning 12 10.3 Test temperature 12 10.4 Procedure . 12 10.5 Calcula
34、tions 12 10.6 Report. 12 10.7 Result . 12 11 Secant modulus at 2 % elongation . 13 11.1 Number and form of test specimens 13 11.2 Procedure . 13 11.3 Calculation 13 11.4 Report. 13 11.5 Result . 13 12 Electric strength 13 12.1 Number and form of test specimens 13 12.2 Conditioning 13 12.3 Electrodes
35、 13 12.4 Procedure . 14 12.5 Report. 14 BS EN IEC 626772:2018IEC 62677-2:2017 IEC 2017 3 12.6 Result . 14 13 Volume resistivity 14 13.1 Number and form of test specimens 14 13.2 Electrodes 14 13.3 Procedure . 14 13.4 Report. 14 13.5 Result . 14 14 Permittivity and dissipation factor 14 14.1 Number a
36、nd form of test specimens 14 14.2 Electrodes 14 14.3 Procedure . 14 14.4 Calculation 14 14.5 Result . 15 15 Resistance to tracking . 15 15.1 Procedure . 15 15.2 Report. 15 15.3 Result . 15 16 Flammability 15 16.1 Method A 15 16.1.1 Number and form of test specimens . 15 16.1.2 Procedure 15 16.1.3 Re
37、sult 15 16.2 Method B 15 16.2.1 Number and form of test specimens . 15 16.2.2 Apparatus 15 16.2.3 Procedure 15 16.2.4 Result 16 17 Carbon black content . 16 17.1 Number and form of test specimens 16 17.2 Procedure . 16 17.3 Report. 16 17.4 Result . 17 18 Resistance to selected fluids . 17 18.1 Princ
38、iple . 17 18.2 Choice of fluid . 17 18.3 Methods of assessment 17 18.4 Number and form of test specimens 17 18.5 Procedure . 17 18.6 Result . 18 19 Long term heat ageing (3 000 h) 18 19.1 Number and form of test specimens 18 19.2 Procedure . 18 19.3 Report. 18 19.4 Result . 18 20 Heat ageing . 18 20
39、.1 Number and form of test specimens 18 20.2 Procedure . 18 21 Water absorption . 18 BS EN IEC 626772:2018 4 IEC 62677-2:2017 IEC 2017 21.1 Procedure . 18 21.2 Report. 18 21.3 Result . 18 22 Resistance to mould growth . 19 22.1 Test in accordance with ISO 846 . 19 22.2 Report. 19 22.3 Result . 19 23
40、 Peel adhesion 19 23.1 Principle . 19 23.2 Apparatus . 19 23.3 Form and number of test specimens . 19 23.4 Procedure . 19 23.5 Calculation 20 23.6 Report. 20 23.7 Result . 20 24 Copper corrosion (presence of corrosive volatiles) 20 24.1 Principle . 20 24.2 Apparatus . 20 24.3 Number and form of test
41、 specimens 21 24.4 Procedure . 21 24.5 Report. 21 24.6 Result . 21 25 Halogen content 21 25.1 Method for the determination of low levels of chlorine and/or bromine and/or iodine 21 25.1.1 Principle 21 25.1.2 Apparatus 22 25.1.3 Procedure 22 25.2 Determination of low levels of fluorine . 22 25.2.1 Pr
42、inciple 22 25.2.2 Apparatus 22 25.2.3 Reagents . 23 25.2.4 Procedure 23 25.3 Result . 23 26 Adhesive temperature resistance . 23 26.1 Number and form of test specimens 23 26.2 Procedure . 23 26.3 Report. 23 26.4 Result . 24 27 Resistance to weathering 24 27.1 Number and form of test specimens 24 27.
43、2 Procedure . 24 27.3 Report. 24 Bibliography 25 Figure 1 Dumb-bell specimen for tensile strength test 11 Figure 2 Test arrangement for flammability to Clause 16 method B 16 Figure 3 Test arrangement for heat shrink moulded shape on metal tube or cable . 20 BS EN IEC 626772:2018IEC 62677-2:2017 IEC
44、2017 5 INTERNATIONAL ELECTROTECHNICAL COMMISSION _ HEAT SHRINKABLE LOW AND MEDIUM VOLTAGE MOULDED SHAPES Part 2: Methods of test FOREWORD 1) The International Electrotechnical Commission (IEC) is a worldwide organization for standardization comprising all national electrotechnical committees (IEC Na
45、tional Committees). The object of IEC is to promote international co-operation on all questions concerning standardization in the electrical and electronic fields. To this end and in addition to other activities, IEC publishes International Standards, Technical Specifications, Technical Reports, Pub
46、licly Available Specifications (PAS) and Guides (hereafter referred to as “IEC Publication(s)”). Their preparation is entrusted to technical committees; any IEC National Committee interested in the subject dealt with may participate in this preparatory work. International, governmental and non-gover
47、nmental organizations liaising with the IEC also participate in this preparation. IEC collaborates closely with the International Organization for Standardization (ISO) in accordance with conditions determined by agreement between the two organizations. 2) The formal decisions or agreements of IEC o
48、n technical matters express, as nearly as possible, an international consensus of opinion on the relevant subjects since each technical committee has representation from all interested IEC National Committees. 3) IEC Publications have the form of recommendations for international use and are accepte
49、d by IEC National Committees in that sense. While all reasonable efforts are made to ensure that the technical content of IEC Publications is accurate, IEC cannot be held responsible for the way in which they are used or for any misinterpretation by any end user. 4) In order to promote international uniformity, IEC National Committees undertake to apply IEC Publications transparently to the maximum extent possible in their national and regional publications. Any divergence between any IEC Publica
